| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This covers the address/routers acquire dynamically.
|
|
addresses/routes/fdb entries
We should put a limit on everything, hence also on these resources.
|
|
Now we are not dropping the IPv6LL address when link is down.
So next time when link is up and before kernel acquired this address
we are using the old address.
When the link is down kernel tells us that this address is no longer
valid . Let's remove this address and again when kernel tells us
that the address is added let's use it.
fixes #3264
|
|
This is partial fix for #2228 and #2977, #3204.
bridge-test: netdev ready
docker0: Gained IPv6LL
wlan0: Gained IPv6LL
eth0: Gained IPv6LL
Enumeration completed
bridge-test: netdev exists, using existing without changing its
parameters
vboxnet0: IPv6 enabled for interface: Success
lo: Configured
docker0: Could not drop address: No such process
vboxnet0: Gained carrier
wlan0: Could not drop address: No such process
eth0: Could not drop address: No such process
eth0: Could not drop address: No such process
eth0: Could not drop address: No such process
vboxnet0: Gained IPv6LL
vboxnet0: Could not set NDisc route or address: Invalid argument
vboxnet0: Failed
[New Thread 0x7ffff6505700 (LWP 1111)]
[Thread 0x7ffff6505700 (LWP 1111) exited]
Assertion 'link->state == LINK_STATE_SETTING_ROUTES' failed at
src/network/networkd-link.c:672, function link_enter_configured().
Aborting.
Program received signal SIGABRT, Aborted.
0x00007ffff6dc6a98 in raise () from /lib64/libc.so.6
Missing separate debuginfos, use: dnf debuginfo-install
iptables-1.4.21-15.fc23.x86_64 libattr-2.4.47-14.fc23.x86_64
libidn-1.32-1.fc23.x86_64 pcre-8.38-7.fc23.x86_64
Debugging
(gdb) bt
"link->state == LINK_STATE_SETTING_ROUTES", file=0x5555556a34c8
"src/network/networkd-link.c", line=672,
func=0x5555556a56d0 <__PRETTY_FUNCTION__.14850>
"link_enter_configured") at src/basic/log.c:788
src/network/networkd-link.c:672
src/network/networkd-link.c:720
flags=0 '\000', scope=0 '\000', cinfo=0x7fffffffe020) at
src/network/networkd-address.c:344
(rtnl=0x5555556eded0, message=0x55555570ff20, userdata=0x5555556ec590)
at src/network/networkd-manager.c:604
m=0x55555570ff20) at src/libsystemd/sd-netlink/sd-netlink.c:365
at src/libsystemd/sd-netlink/sd-netlink.c:395
ret=0x0) at src/libsystemd/sd-netlink/sd-netlink.c:429
revents=1, userdata=0x5555556eded0) at
src/libsystemd/sd-netlink/sd-netlink.c:723
src/libsystemd/sd-event/sd-event.c:2268
src/libsystemd/sd-event/sd-event.c:2629
timeout=18446744073709551615) at src/libsystemd/sd-event/sd-event.c:2688
bus=0x5555556eeba0, name=0x55555568a2f5 "org.freedesktop.network1",
timeout=30000000,
check_idle=0x55555556adb6 <manager_check_idle>,
userdata=0x5555556ec590) at src/shared/bus-util.c:134
src/network/networkd-manager.c:1130
src/network/networkd.c:127
(gdb) f 3
src/network/networkd-link.c:672
672 assert(link->state == LINK_STATE_SETTING_ROUTES);
(gdb) p link->state
$1 = LINK_STATE_FAILED
We should not be in this state .
even if vboxnet0 failed we went into this state.
vboxnet0: Could not set NDisc route or address: Invalid argument
vboxnet0: Failed
|
|
Also adjust indentation in various places.
|
|
|
|
Closes #2166.
We only allow 0, infinity and forever.
infinity and forever is same.
|
|
It make more sense to initalize the node first then
we add to the list.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
This ensures that several DHCPv6 clients can run on separate interfaces
simultaneously.
|
|
This is managed by the kernel, but we should track whether or not we have
a configured IPv6LL address. This fixes two issues:
- we now wait for IPv6LL before considering the link ready
- we now wait for IPv6LL before attempting to do NDisc or DHCPv6
these protocols relies on an LL address being available.
|
|
Instead instantiate the kernel flags to TENTATIVE until the kernel
updates us with the real value.
|
|
For now only deserialize some basic state and the applied addresses.
When a link is added, try to deserialize it's state from /run. This
is relevant only when networkd is restarted at runtime.
|
|
|
|
The operstate may change based on address properties, so make a change of
address trigger an operstate update.
|
|
|
|
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
Every time the state is written out we may trigger third-party apps, so
let's be a bit more careful about writing this out unnecessarily.
|
|
|
|
We only keep the addresses that we added ourselves in link->addresses, and
introduce a new set link->addresses_foreign to keep addresses of unknown
origin.
Only functional change is that "foreign" addresses no longer prevent a link
from entering "configured" state.
|
|
Establish the firewall rule before creating the address, and do not create the address
if the firewall rule could not be created. Also, only drop the firewall rule once
the address has been removed from the kernel.
|
|
These functions are almost entirely the same, so avoid duplication.
|
|
Call back into link_check_ready() whenever an address state change may have
made a link ready.
|
|
We were considering a link configured whilst its IPv6 addresses were still
tentative.
Fixes issue #650.
|
|
Checks that a given address is not tentative nor deprecated.
|
|
No need to expose these functions, but rather call them from address_{add,drop}.
|
|
Don't allocate Address objects only to free them again when processing
rtnl events.
|
|
We need to be able to look these things up quickly as we will be updating them
continuously and there can in principle be many of them.
|
|
Add compare_func and hash_func for the Address object. The notion of
address equality is the same as in the kernel, and hashing preserves
preserves equality.
Two addresses are considered equal if:
- they have the same address family, and
- they are neither IPv4 nor IPv6 addresses, or
- the local addresses are identical, and
- they are IPv6 addresses, or
- they have the same prefixlength, and
- their peer prefixes are identical
This fixes a bug in the old equality check, which got the local address
and the peer prefix mixed up.
|
|
Rename new_dynamic() to simply _new() and reuse that from new_static().
|
|
- Rely everywhere that we use abs() on the error code passed in anyway,
thus don't need to explicitly negate what we pass in
- Never attach synthetic error number information to log messages. Only
log about errors we *receive* with the error number we got there,
don't log any synthetic error, that don#t even propagate, but just eat
up.
- Be more careful with attaching exactly the error we get, instead of
errno or unrelated errors randomly.
- Fix one occasion where the error number and line number got swapped.
- Make sure we never tape over OOM issues, or inability to resolve
specifiers
|
|
No functional changes, just moving definitions into separate header
files.
|
|
The names fw-util.[ch] are too ambiguous, better rename the files to
firewall-util.[ch]. Also rename the test accordingly.
|
|
|
|
When setting IPv6 addresses acquired by DHCPv6, systemd-networkd sets
the IFA_F_NOPREFIXROUTE flag in the IFA_FLAGS netlink attribute. As
the flag and the attribute are present starting with Linux 3.14, older
kernels will need systemd-network to manage prefix route expiry.
By default, DHCPv6 addresses are first assigned setting the
IFA_F_NOPREFIXROUTE flag in the IFA_FLAGS netlink attribute. Should
the address assignment fail, the same assignment is tried without
the IFA_FLAGS attribute. Should also the second attempt fail, an error
is printed and address assignment ends with failure. As successful use
of the IFA_FLAGS netlink attribute is recorded in the Link structure,
the DHCPv6 code will know if the kernel or systemd-network fallback
code handles expiring prefixes.
The prefix expiration and IPv6 address updating fallback code is
resurrected from the parts deleted with commit
47d45d3cde45d6545367570264e4e3636bc9e345.
This patch can be removed once the minimum kernel requirements are
greater than or equal to 3.14.
|
|
This makes adds a couple of fixes:
- Introduces log_netdev_error_errno() and friends, which takes an error
number, and matches what log_link_error_errno() and friends do.
- Replaces a lof ot strerror() usage with log_netdev_error_errno(),
log_link_error_errno() and log_erro_errno()
- Uppercases the first character of many log messages, after all this is
supposed to be english language
- Drops manual negating of error codes before passing them to log
functions, the log functions all do that internally anyway.
Some other minor fixes.
Behaviour should not change really.
|
|
The IFA_F_NOPREFIXROUTE flag prevents the kernel from creating new onlink
prefixes when a DHCPv6 IPv6 address with a prefix length is set from user
space. IPv6 routing will follow the onlink status from Router Advertisment
Prefix Information options or any manually set route, which is the correct
thing to do.
As this flag has a larger value than what fits into an unsigned char, update
the flag attribute to an uint32_t and set it with an IFA_FLAGS attribute
when writing netlink messages to the kernel.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
|
|
|
|
This adds two new settings to networkd's .network files:
IPForwarding=yes and IPMasquerade=yes. The former controls the
"forwarding" sysctl setting of the interface, thus controlling whether
IP forwarding shall be enabled on the specific interface. The latter
controls whether a firewall rule shall be installed that exposes traffic
coming from the interface as coming from the local host to all other
interfaces.
This also enables both options by default for container network
interfaces, thus making "systemd-nspawn --network-veth" have network
connectivity out of the box.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=83270
|
|
|
|
|
|
Basically:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \
$f; done
Plus manual indentation fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
