summaryrefslogtreecommitdiff
path: root/src/network/networkd-netdev.c
AgeCommit message (Collapse)Author
2016-02-10tree-wide: remove Emacs lines from all filesDaniel Mack
This should be handled fine now by .dir-locals.el, so need to carry that stuff in every file.
2015-11-27tree-wide: expose "p"-suffix unref calls in public APIs to make gcc cleanup easyLennart Poettering
GLIB has recently started to officially support the gcc cleanup attribute in its public API, hence let's do the same for our APIs. With this patch we'll define an xyz_unrefp() call for each public xyz_unref() call, to make it easy to use inside a __attribute__((cleanup())) expression. Then, all code is ported over to make use of this. The new calls are also documented in the man pages, with examples how to use them (well, I only added docs where the _unref() call itself already had docs, and the examples, only cover sd_bus_unrefp() and sd_event_unrefp()). This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we tend to call our destructors these days. Note that this defines no public macro that wraps gcc's attribute and makes it easier to use. While I think it's our duty in the library to make our stuff easy to use, I figure it's not our duty to make gcc's own features easy to use on its own. Most likely, client code which wants to make use of this should define its own: #define _cleanup_(function) __attribute__((cleanup(function))) Or similar, to make the gcc feature easier to use. Making this logic public has the benefit that we can remove three header files whose only purpose was to define these functions internally. See #2008.
2015-11-16siphash24: let siphash24_finalize() and siphash24() return the result directlyDaniel Mack
Rather than passing a pointer to return the result, return it directly from the function calls. Also, return the result in native endianess, and let the callers care about the conversion. For hash tables and bloom filters, we don't care, but in order to keep MAC addresses and DHCP client IDs stable, we explicitly convert to LE.
2015-11-16siphash24: change result argument to uint64_tMartin Pitt
Change the "out" parameter from uint8_t[8] to uint64_t. On architectures which enforce pointer alignment this fixes crashes when we previously cast an unaligned array to uint64_t*, and on others this should at least improve performance as the compiler now aligns these properly. This also simplifies the code in most cases by getting rid of typecasts. The only place which we can't change is struct duid's en.id, as that is _packed_ and public API, so we can't enforce alignment of the "id" field and have to use memcpy instead.
2015-10-27util-lib: split out allocation calls into alloc-util.[ch]Lennart Poettering
2015-10-27util-lib: move string table stuff into its own string-table.[ch]Lennart Poettering
2015-10-27util-lib: split stat()/statfs()/stavfs() related calls into stat-util.[ch]Lennart Poettering
2015-10-25util-lib: split out fd-related operations into fd-util.[ch]Lennart Poettering
There are more than enough to deserve their own .c file, hence move them over.
2015-10-24util-lib: split our string related calls from util.[ch] into its own file ↵Lennart Poettering
string-util.[ch] There are more than enough calls doing string manipulations to deserve its own files, hence do something about it. This patch also sorts the #include blocks of all files that needed to be updated, according to the sorting suggestions from CODING_STYLE. Since pretty much every file needs our string manipulation functions this effectively means that most files have sorted #include blocks now. Also touches a few unrelated include files.
2015-10-05networkd: add bridge propertiesSusant Sahani
ForwardDelaySec: forward delay HelloTimeSec: hello time MaxAgeSec: maximum message age for more information see http://www.tldp.org/HOWTO/BRIDGE-STP-HOWTO/set-up-the-bridge.html In kernel br_dev_newlink: does not have the this functionality to set while creation. br_changelink: after creation we can change the parameters. we need to first create then set it the parameters. Introduce new callback post_create .This should set the properties after the creation.
2015-08-27networkd: split up networkd.h into per-object header filesLennart Poettering
No functional changes, just moving definitions into separate header files.
2015-07-27networkd: add support for macvtapSusant Sahani
This patch add support for macvtap. see http://virt.kernelnewbies.org/MacVTap
2015-06-29networkd: netdev - avoid hanging transactions in failure casesTom Gundersen
If a link is attempted t obe enslaved by a netdev that has already failed, we must fail immediately and not save the callback for later, as it will then never get triggered.
2015-06-29networkd: fix segfault when cancelling callbacksTom Gundersen
This only happens when something has gone wrong, so is not easy to hit. However, if a bridge (say) is configured on a system without bridge support we will hit this. Fixes issue #299.
2015-06-13sd-netlink: rename from sd-rtnlTom Gundersen
2015-04-29networkd: introduce vti6 tunnelSusant Sahani
This patch add support to create vti6 tunnel test: vt6.network [Match] Name=wlan0 [Network] Tunnel=ip6vti vti6.netdev [NetDev] Name=ip6vti Kind=vti6 [Tunnel] Local=2a00:ffde:4567:edde::4987 Remote=2001:473:fece:cafe::5179 ip link 11: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/tunnel6 :: brd :: 12: ip6vti@wlan0: <POINTOPOINT,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/tunnel6 2a00:ffde:4567:edde::4987 peer 2001:473:fece:cafe::5179
2015-04-21networkd: improve how networkd logs thingsLennart Poettering
This makes adds a couple of fixes: - Introduces log_netdev_error_errno() and friends, which takes an error number, and matches what log_link_error_errno() and friends do. - Replaces a lof ot strerror() usage with log_netdev_error_errno(), log_link_error_errno() and log_erro_errno() - Uppercases the first character of many log messages, after all this is supposed to be english language - Drops manual negating of error codes before passing them to log functions, the log functions all do that internally anyway. Some other minor fixes. Behaviour should not change really.
2015-04-21networkd: fix confusion between log_netdev_error() but log_warning_netdev()Lennart Poettering
We should always name the object first, the level second, like everywhere else in the sources.
2015-03-04networkd: netdev - inform when we take over an existing netdevTom Gundersen
The crucial point here is that we will not change the settings of a netdev created by someone else we simply use it as is and trust it was set up as intended. This is confusing in the case of the pre-created netdev's (bond0 etc.), the solution should probably be to simply make the kernel stop creating these devices as they are pretty useless.
2015-02-23remove unused includesThomas Hindoe Paaboel Andersen
This patch removes includes that are not used. The removals were found with include-what-you-use which checks if any of the symbols from a header is in use.
2015-01-22networkd: Introduce ip6gre and ip6gretapSusant Sahani
This patch introduces ipv6 gre and gretap. test: ip6gre.netdev: [NetDev] Name=ip6gretap Kind=ip6gretap [Tunnel] Local=2a00:ffde:4567:edde::4987 Remote=2001:473:fece:cafe::5179 ip6gre.network: [Match] Name=eno16777736 [Network] Tunnel=ip6gretap ip link 6: ip6gre@eno16777736: <POINTOPOINT,NOARP> mtu 1448 qdisc noop state DOWN mode DEFAULT group default link/gre6 2a:00:ff:de:45:67:ed:de:00:00:00:00:00:00:49:87 peer 20:01:04:73:fe:ce:ca:fe:00:00:00:00:00:00:51:79
2015-01-22networkd: Introduce IP6 tunnelSusant Sahani
This patch enables networkd to create IP6 tunnels example conf: ipip6.netdev: [NetDev] Name=ipip6-tunnel Kind=ip6tnl [Tunnel] Mode=ip4ipv6 Local=2a00:ffde:4567:edde::4987 Remote=2001:473:fece:cafe::5179 ipip6.network [Match] Name=wlan0 [Network] Tunnel=ipip6-tunnel 23: ipip6-tunnel@wlan0: <POINTOPOINT,NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default link/tunnel6 2a00:ffde:4567:edde::4987 peer 2001:473:fece:cafe::5179
2015-01-22networkd: introduce gretapSusant Sahani
This patch introdeces gretap to networkd
2015-01-19networkd: netdev - add ipvlan supportTom Gundersen
2014-12-11networkd/resolved: correct spacing near eol in code commentsTorstein Husebø
2014-12-05net_setup/networkd: warn if matching is done on possibly unstable ifnameTom Gundersen
2014-12-04udev: net_setup - allow matching on OriginalName=Tom Gundersen
This has been requested repeatedly, so let's give it a go. We explicitly do not allow matching on names that have already been changed (from a previous udev run, or otherwise), and matching on unpredictable names (ethX) is discouraged (but not currently disallowed). We also currently allow: [Match] Name=veth0 [Link] Name=my-name0 SomeOtherSetting=true Which means that the link file will be applied the first time it is invoked, but not on subsequent invocations, which may be surprising.
2014-12-03networkd: fix typoTorstein Husebø
V2: found another one
2014-11-28treewide: yet more log_*_errno + return simplificationsMichal Schmidt
Using: find . -name '*.[ch]' | while read f; do perl -i.mmm -e \ 'local $/; local $_=<>; s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg; print;' $f done And a couple of manual whitespace fixups.
2014-11-28treewide: no need to negate errno for log_*_errno()Michal Schmidt
It corrrectly handles both positive and negative errno values.
2014-11-28treewide: auto-convert the simple cases to log_*_errno()Michal Schmidt
As a followup to 086891e5c1 "log: add an "error" parameter to all low-level logging calls and intrdouce log_error_errno() as log calls that take error numbers", use sed to convert the simple cases to use the new macros: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/' Multi-line log_*() invocations are not covered. And we also should add log_unit_*_errno().
2014-11-27log: rearrange log function namingLennart Poettering
- Rename log_meta() → log_internal(), to follow naming scheme of most other log functions that are usually invoked through macros, but never directly. - Rename log_info_object() to log_object_info(), simply because the object should be before any other parameters, to follow OO-style programming style.
2014-11-27log: add an "error" parameter to all low-level logging calls and intrdouce ↵Lennart Poettering
log_error_errno() as log calls that take error numbers This change has two benefits: - The format string %m will now resolve to the specified error (or to errno if the specified error is 0. This allows getting rid of a ton of strerror() invocations, a function that is not thread-safe. - The specified error can be passed to the journal in the ERRNO= field. Now of course, we just need somebody to convert all cases of this: log_error("Something happened: %s", strerror(-r)); into thus: log_error_errno(-r, "Something happened: %m");
2014-09-08networkd: netdev - failing to create a netdev is not fatal, just fail that ↵Tom Gundersen
netdev
2014-08-19networkd: netdev - add missing callback when adding stacked devicesTom Gundersen
As the comment says, the passed in callback must always be invoked, or the underlying link will hang. This was missed when reworking the code, so add it back in.
2014-08-12networkd: split out networkd-link.hTom Gundersen
2014-07-21networkd: netdev - split NetDev struct into per-kind structsTom Gundersen
Similarly to how unit types work.
2014-07-18sd-rtnl: make string returned by sd_rtnl_message_read_string() constLennart Poettering
2014-07-16tty-ask-password-agent: modernizationZbigniew Jędrzejewski-Szmek
2014-07-16Be more careful when checking for empty filesZbigniew Jędrzejewski-Szmek
If we want to avoid reading a totally empty file, it seems better to check after we have opened the file, not before.
2014-07-16Let config_parse open file where applicableZbigniew Jędrzejewski-Szmek
Special care is needed so that we get an error message if the file failed to parse, but not when it is missing. To avoid duplicating the same error check in every caller, add an additional 'warn' boolean to tell config_parse whether a message should be issued. This makes things both shorter and more robust wrt. to error reporting.
2014-07-15Constify ConfigTableItem tablesZbigniew Jędrzejewski-Szmek
2014-07-14networkd: netdev - introduce vtable for netdev kindsTom Gundersen
Split each netdev kind into its own .h/.c.
2014-07-14networkd: netdev - rework load_oneTom Gundersen
We now: - parse config - match on environment - verify and complement config - create netdev
2014-07-14networkd: netdev - split out bridge creationTom Gundersen
2014-07-14networkd: netdev - rename 'enslave' to 'join'Tom Gundersen
Enslave only really makes sense when referring to bridges and bonds, so try to be a bit more neutral.
2014-07-07networkd: add support for modeSusant Sahani
This patch adds supports networkd to configure bond mode during creation via persistent conf. Mode can be configured with conf param 'Mode'. A new section Bond is added to the conf to support bond mode. These modes can be configured now. balance-rr active-backup balance-xor broadcast 802.3ad balance-tlb balance-alb Example conf file: test-bond.conf [NetDev] Name=bond1 Kind=bond [Bond] Mode=balance-xor Test case: 1. start networkd service: 12: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 22:89:6c:47:23:d2 brd ff:ff:ff:ff:ff:ff 2. find bond mode: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: load balancing (xor) Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 Changes: 1. Added file networkd-bond.c 2. Bond mode enum BondMode 3. conf section [Bond] [tomegun: whitespace]
2014-07-03networkd: tuntap - default to no packet informationTom Gundersen
Susant says: > ip tuntap turns this off by default. Let's follow ip(8) here as that should be the least surprising.
2014-07-03networkd: tuntap - enable PacketInfo by defaultTom Gundersen
2014-07-03networkd: netdev - move tunnel address parsing to networkd-tunnel.cTom Gundersen