| Age | Commit message (Collapse) | Author |
|---|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
Rather than passing a pointer to return the result, return it directly
from the function calls.
Also, return the result in native endianess, and let the callers care
about the conversion. For hash tables and bloom filters, we don't care,
but in order to keep MAC addresses and DHCP client IDs stable, we
explicitly convert to LE.
|
|
Change the "out" parameter from uint8_t[8] to uint64_t. On architectures which
enforce pointer alignment this fixes crashes when we previously cast an
unaligned array to uint64_t*, and on others this should at least improve
performance as the compiler now aligns these properly.
This also simplifies the code in most cases by getting rid of typecasts. The
only place which we can't change is struct duid's en.id, as that is _packed_
and public API, so we can't enforce alignment of the "id" field and have to
use memcpy instead.
|
|
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
ForwardDelaySec: forward delay
HelloTimeSec: hello time
MaxAgeSec: maximum message age
for more information see
http://www.tldp.org/HOWTO/BRIDGE-STP-HOWTO/set-up-the-bridge.html
In kernel
br_dev_newlink: does not have the this functionality to set while
creation.
br_changelink: after creation we can change the parameters.
we need to first create then set it the parameters.
Introduce new callback post_create .This should
set the properties after the creation.
|
|
No functional changes, just moving definitions into separate header
files.
|
|
This patch add support for macvtap.
see http://virt.kernelnewbies.org/MacVTap
|
|
If a link is attempted t obe enslaved by a netdev that has already failed, we
must fail immediately and not save the callback for later, as it will then
never get triggered.
|
|
This only happens when something has gone wrong, so is not easy to hit. However,
if a bridge (say) is configured on a system without bridge support we will hit
this.
Fixes issue #299.
|
|
|
|
This patch add support to create vti6 tunnel
test:
vt6.network
[Match]
Name=wlan0
[Network]
Tunnel=ip6vti
vti6.netdev
[NetDev]
Name=ip6vti
Kind=vti6
[Tunnel]
Local=2a00:ffde:4567:edde::4987
Remote=2001:473:fece:cafe::5179
ip link
11: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT
group default
link/tunnel6 :: brd ::
12: ip6vti@wlan0: <POINTOPOINT,NOARP> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default
link/tunnel6 2a00:ffde:4567:edde::4987 peer 2001:473:fece:cafe::5179
|
|
This makes adds a couple of fixes:
- Introduces log_netdev_error_errno() and friends, which takes an error
number, and matches what log_link_error_errno() and friends do.
- Replaces a lof ot strerror() usage with log_netdev_error_errno(),
log_link_error_errno() and log_erro_errno()
- Uppercases the first character of many log messages, after all this is
supposed to be english language
- Drops manual negating of error codes before passing them to log
functions, the log functions all do that internally anyway.
Some other minor fixes.
Behaviour should not change really.
|
|
We should always name the object first, the level second, like
everywhere else in the sources.
|
|
The crucial point here is that we will not change the settings of a netdev created by someone else
we simply use it as is and trust it was set up as intended.
This is confusing in the case of the pre-created netdev's (bond0 etc.), the solution should probably
be to simply make the kernel stop creating these devices as they are pretty useless.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
This patch introduces ipv6 gre and gretap.
test:
ip6gre.netdev:
[NetDev]
Name=ip6gretap
Kind=ip6gretap
[Tunnel]
Local=2a00:ffde:4567:edde::4987
Remote=2001:473:fece:cafe::5179
ip6gre.network:
[Match]
Name=eno16777736
[Network]
Tunnel=ip6gretap
ip link
6: ip6gre@eno16777736: <POINTOPOINT,NOARP> mtu 1448 qdisc noop state
DOWN mode DEFAULT group default
link/gre6 2a:00:ff:de:45:67:ed:de:00:00:00:00:00:00:49:87 peer
20:01:04:73:fe:ce:ca:fe:00:00:00:00:00:00:51:79
|
|
This patch enables networkd to create IP6 tunnels
example conf:
ipip6.netdev:
[NetDev]
Name=ipip6-tunnel
Kind=ip6tnl
[Tunnel]
Mode=ip4ipv6
Local=2a00:ffde:4567:edde::4987
Remote=2001:473:fece:cafe::5179
ipip6.network
[Match]
Name=wlan0
[Network]
Tunnel=ipip6-tunnel
23: ipip6-tunnel@wlan0: <POINTOPOINT,NOARP> mtu 1452 qdisc noop state
DOWN mode DEFAULT group default
link/tunnel6 2a00:ffde:4567:edde::4987 peer 2001:473:fece:cafe::5179
|
|
This patch introdeces gretap to networkd
|
|
|
|
|
|
|
|
This has been requested repeatedly, so let's give it a go. We explicitly do not allow matching
on names that have already been changed (from a previous udev run, or otherwise), and matching
on unpredictable names (ethX) is discouraged (but not currently disallowed).
We also currently allow:
[Match]
Name=veth0
[Link]
Name=my-name0
SomeOtherSetting=true
Which means that the link file will be applied the first time it is invoked, but
not on subsequent invocations, which may be surprising.
|
|
V2: found another one
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
- Rename log_meta() → log_internal(), to follow naming scheme of most
other log functions that are usually invoked through macros, but never
directly.
- Rename log_info_object() to log_object_info(), simply because the
object should be before any other parameters, to follow OO-style
programming style.
|
|
log_error_errno() as log calls that take error numbers
This change has two benefits:
- The format string %m will now resolve to the specified error (or to
errno if the specified error is 0. This allows getting rid of a ton of
strerror() invocations, a function that is not thread-safe.
- The specified error can be passed to the journal in the ERRNO= field.
Now of course, we just need somebody to convert all cases of this:
log_error("Something happened: %s", strerror(-r));
into thus:
log_error_errno(-r, "Something happened: %m");
|
|
netdev
|
|
As the comment says, the passed in callback must always be invoked, or the underlying link
will hang. This was missed when reworking the code, so add it back in.
|
|
|
|
Similarly to how unit types work.
|
|
|
|
|
|
If we want to avoid reading a totally empty file, it seems better
to check after we have opened the file, not before.
|
|
Special care is needed so that we get an error message if the
file failed to parse, but not when it is missing. To avoid duplicating
the same error check in every caller, add an additional 'warn' boolean
to tell config_parse whether a message should be issued.
This makes things both shorter and more robust wrt. to error reporting.
|
|
|
|
Split each netdev kind into its own .h/.c.
|
|
We now:
- parse config
- match on environment
- verify and complement config
- create netdev
|
|
|
|
Enslave only really makes sense when referring to bridges and bonds, so try to be
a bit more neutral.
|
|
This patch adds supports networkd to configure bond mode
during creation via persistent conf. Mode can be configured
with conf param 'Mode'. A new section Bond is added to the
conf to support bond mode.
These modes can be configured now.
balance-rr
active-backup
balance-xor
broadcast
802.3ad
balance-tlb
balance-alb
Example conf file: test-bond.conf
[NetDev]
Name=bond1
Kind=bond
[Bond]
Mode=balance-xor
Test case:
1. start networkd service:
12: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UNKNOWN mode DEFAULT group default
link/ether 22:89:6c:47:23:d2 brd ff:ff:ff:ff:ff:ff
2. find bond mode:
cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (xor)
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
Changes:
1. Added file networkd-bond.c
2. Bond mode enum BondMode
3. conf section [Bond]
[tomegun: whitespace]
|
|
Susant says:
> ip tuntap turns this off by default.
Let's follow ip(8) here as that should be the least surprising.
|
|
|
|
|
