| Age | Commit message (Collapse) | Author |
|---|
|
The work supports route preference configurable.
i.e. able to set low, medium and high.
|
|
This work based on Tom's original patch
teg@1312172
By setting GatewayOnlink=yes, the kernel will assume that the gateway is onlink
even if there is no route to it.
Resolves issue #1283.
|
|
fd45e52 sets
n to NULL which leads to crash.
fixes: #5418
|
|
section_line and filename should be set together or not at all. Change the
if to test filename, since it's the first of the pair and it seems more natural
to test that.
|
|
The code was not incorrect previously, but I think it's easier to follow the
ownership (and the code is more likely to remain correct when updated later on),
if freeing of NetworkConfigSection* is immediately made the responsibility of
route_free(), so instead of relying on route_free() not freeing ->section
if adding to the network hashmap failed, make this freeing unconditional.
|
|
Now we track the sections for example [Address] via line number.
Which was fine till we din't had dropins dir. If we have multiple
sections which have the ideantical line number in diffrent files
we are overwriting these since line number is the key.
This patch fixes this by taking filename and line number as key.
This fixes [Address] and [Route] section overwriting.
fixes: #5141
|
|
This patch handles the custom MTU field in IPv6 RA.
fixes RFE #4464
|
|
Rename networkd.h to networkd-manager.h, to more accurately describe what it
contains.
|
|
Fixes #3922.
|
|
The default route table used by sd-netlink (and iproute2) is
RT_TABLE_MAIN, not RT_TABLE_DEFAULT. Ensure networkd has the same idea.
|
|
link_messages is used during link configuration to advance the link
state machine through SETTING_ADDRESSES -> SETTING_ROUTES -> CONFIGURED.
If a route expires in the middle of this, it is possible for
link_messages to hit zero inside route_expire_callback, rather than in
route_handler or address_handler where it would trigger the next step in
configuration. Should this happen, the link will not complete
configuration, and it may not have its static routes configured.
Since route_expire_callback does not need to do anything once the
expired route has been removed from the kernel, it is safe to simply not
account for the netlink request.
|
|
If no result parameter is provided, do not attempt to write the
found/newly-created route to it. This is presently not an issue as all
callers currently provide a non-NULL result parameter, however we should
do this for symmetry with address_add and future code robustness.
|
|
safe_atou32 (#3522)
|
|
yet (#3499)
Corrects: 1b566071
Also see: https://github.com/systemd/systemd/pull/3478#issuecomment-225008542
|
|
|
|
This covers the address/routers acquire dynamically.
|
|
addresses/routes/fdb entries
We should put a limit on everything, hence also on these resources.
|
|
Fix for #3232.
|
|
|
|
It is just an alias for route_free which requires that route is not null,
but it was only used in one place where it was checked that route is not
null anyway. Let's just call route_free instead.
|
|
|
|
networkd: add support to set route table
1. add support to configure the table id.
if id is less than 256 we can fit this in the header of route as
netlink property is a char. But in kernel this proepty is a
unsigned 32. Hence if greater that 256 add this as RTA_TABLE
attribute.
2. we are not setting the address family now. Now set this property.
|
|
We are not able to add multiple properties.
wlp3s0.network:
[Match]
Name=wlp3s0
[Route]
Gateway=10.68.5.26
Metric=10
sudo ./systemd-networkd
Failed to parse file '/usr/lib/systemd/network/wlp3s0.network': File
exists
Could not load configuration files: File exists
This patch fixes it.
|
|
Let's properly handle hashmap_put() failing.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
Router Discovery is a core part of IPv6, which by default is handled by the kernel.
However, the kernel implementation is meant as a fall-back, and to fully support
the protocol a userspace implementation is desired.
The protocol essentially listens for Router Advertisement packets from routers
on the local link and use these to configure the client automatically. The four
main pieces of information are: what kind (if any) of DHCPv6 configuration should
be performed; a default gateway; the prefixes that should be considered to be on
the local link; and the prefixes with which we can preform SLAAC in order to pick
a global IPv6 address.
A lot of additional information is also available, which we do not yet fully
support, but which will eventually allow us to avoid the need for DHCPv6 in the
common case.
Short-term, the reason for wanting this is in userspace was the desire to fully
track all the addresses on links we manage, and that is not possible for addresses
managed by the kernel (as the kernel does not expose to us the fact that it
manages these addresses). Moreover, we would like to support stable privacy
addresses, which will soon be mandated and the legacy MAC-based global addresses
deprecated, to do this well we need to handle the generation in userspace. Lastly,
more long-term we wish to support more RA options than what the kernel exposes.
|
|
This should really live in the kernel, but the netlink API currently
does not support it. Until support has been added, expire the route
from userspace.
|
|
|
|
Different tools use different terms for the same concept, let's try
to stick with 'priority', as that is what the netlink API uses.
|
|
|
|
|
|
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
|
|
|
|
No need to expose these functions, but rather call them from address_{add,drop}.
|
|
Rename new_dynamic() to simply _new() and reuse that from new_static().
|
|
networkd: add support to configure preferred source of static routes
|
|
- Rely everywhere that we use abs() on the error code passed in anyway,
thus don't need to explicitly negate what we pass in
- Never attach synthetic error number information to log messages. Only
log about errors we *receive* with the error number we got there,
don't log any synthetic error, that don#t even propagate, but just eat
up.
- Be more careful with attaching exactly the error we get, instead of
errno or unrelated errors randomly.
- Fix one occasion where the error number and line number got swapped.
- Make sure we never tape over OOM issues, or inability to resolve
specifiers
|
|
|
|
No functional changes, just moving definitions into separate header
files.
|
|
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
For now we only support the hardcoded values RT_SCOPE_{UNIVERSE,LOCAL,HOST},
and not numerical values or values from /etc/iproute2/rt_scopes.
This addresses https://bugs.freedesktop.org/show_bug.cgi?id=88508.
|
|
|
|
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
