| Age | Commit message (Collapse) | Author |
|---|
|
And inform the DHCPv4 clients about it.
|
|
libudev now does set errno correctly, so we can indeed rely on this.
This reverts commit 2b49732c3d511007ae2c413997e56c40f678d79a.
|
|
This reverts 6f4d55a8ae04e344a41fc2adef12ad99c2bb2927, as we cannot rely on errno here.
Reported by David Herrmann.
|
|
Reported by Raimonds Cicans <ray@apollo.lv>
|
|
This changes the behavior when both DHCPv4 and IPv4LL are enabled. Before,
we would disable IPv4LL when we got a DHCPv4 lease and enable it if the
lease was lost.
Now we just always set up both, if both are enabled, but the DHCPv4
addresses and routes will always take precedence due to their metric
and scope.
|
|
addresses are link-local or not
|
|
The return value may be -EINVAL or a positive errno from the dbus
message. Check both ranges, otherwise most errors are silently ignored.
|
|
|
|
|
|
|
|
Keep this internal to the client and simply restart it when NAK is receieved, as
per the RFC.
|
|
This is necessary for non-ipv4ll hosts to communicate with ipv4ll-only hosts on the same link. Defaults
to being enabled, but can be opted out.
See: <http://avahi.org/wiki/AvahiAutoipd#Routes>
|
|
|
|
This avoids having to distinguish between IPv4 and IPv6, allowing us
to keep their internal orderings. The consumers now has to turn the
strings into addresses.
|
|
In the state files, do not distinguish where the various entries came from
(static or DHCP), but include them all in the same list.
|
|
All routes added by networkd are currently set RTPROT_BOOT, which according
to the kernel means "Route installed during boot" (rtnetlink.h). But this
is not always the case as networkd changes routing after boot too. Since
the kernel gives more detailed protocols, use them.
With this patch, user-configured static routes now use RTPROT_STATIC (which
they are) and DHCP routes use RTPROT_DHCP. There is no define for IPv4LL
yet, so those are installed as RTPROT_STATIC (though perhaps RTPROT_RA is
better?).
[tomegun: fixup
src/network/networkd-link.c:972:33: error: too few arguments to function 'route_new_dynamic']
|
|
Lennart said:
> We have these nice USEC_PER_MSEC-style macro definitions which make it a
> little bit clearer what we are converting here from what into
> what... please use that instead of writing "1000"...
>
> (we stole those from gstreamer btw)
|
|
The following bond options are supported by this patch.
MIIMonitorSec:
Specifies the frequency in milli-seconds that MII link
monitoring will occur.
UpDelaySec:
Specifies the delay time in milli-seconds to enable a link
after a link up status has been detected.
DownDelaySec:
Specifies the delay time in milli-seconds to disable a link
after a link failure has been detected.
changes:
1. Added gconf variables.
2. man page
conf:
[NetDev]
Name=bond1
Kind=bond
[Bond]
Mode=802.3ad
TransmitHashPolicy=layer2+3
LacpduTransmitRate=fast
MIIMonitorSec=1s
UpDelaySec=2s
DownDelaySec=8s
cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2+3 (2)
MII Status: up
MII Polling Interval (ms): 1000
Up Delay (ms): 2000
Down Delay (ms): 8000
802.3ad info
LACP rate: fast
Min links: 0
Aggregator selection policy (ad_select): stable
bond bond1 has no active aggregator
[tomegun: rephrased manpage, dropped bond_ prefix from variables]
|
|
LacpduTransmitRate
option specifies the rate in which link partner to transmit
LACPDU packets in 802.3ad mode. Possible values
slow : Request partner to transmit LACPDUs every 30 seconds
fast : Request partner to transmit LACPDUs every 1 second
The default is slow.
chages:
1. Added enum bond_lacp_rate_table
2. gperf LacpduTransmitRate
Test:
conf file:
[NetDev]
Name=bond1
Kind=bond
[Bond]
Mode=802.3ad
LacpduTransmitRate=fast
test:
cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2+3 (2)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
802.3ad info
LACP rate: fast
Min links: 0
Aggregator selection policy (ad_select): stable
bond bond1 has no active aggregator
[tomegun: renamed from LacpduTransmitRate to LACPTransmitRate, manpage fixes and
dropped bond_ prefix from variables]
|
|
This patch adds support the transmit hash policy to use
for slave selection in balance-xor, 802.3ad, and tlb modes
layer2, layer3+4, layer2+3, encap3+4, encap3+4
Added:
1. BondXmitHashPolicy
2. conf param TransmitHashPolicy
Test conf:
[NetDev]
Name=bond1
Kind=bond
[Bond]
Mode=802.3ad
TransmitHashPolicy=layer2+3
test output:
cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2+3 (2)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
802.3ad info
LACP rate: slow
Min links: 0
Aggregator selection policy (ad_select): stable
bond bond1 has no active aggregator
[tomegun: dropped bond_ prefix from new Bond variable, drop repeated man-page section]
|
|
Similarly to how unit types work.
|
|
People should use rtnl for this, and then only query sd-network by the ifindices it finds.
|
|
Let's settle on a single type for all address family values, even if
UNIX is very inconsitent on the precise type otherwise. Given that
socket() is the primary entrypoint for the sockets API, and that uses
"int", and "int" is relatively simple and generic, we settle on "int"
for this.
|
|
sd_rtnl_message_read_string() was changed to take a const argument, update the users.
|
|
|
|
Do not expose link_is_loopback, people should just get this from rtnl directly.
Do not expose NTP servers as IP addresses, these must be strings.
Expose ifindex as int, not unsigned. This is what the kernel (mostly) and glibc uses.
|
|
Rather than refetching the link information on ever event, we liston to
rtnl to track them. Much code stolen from resolved.
This will allow us to simplify the sd-network api and don't expose
information available over rtnl.
|
|
This is useful to save in the consumer of the lib, unlike ENODATA/EBUSY which
means that the user should wait until a useful state is available.
|
|
sztanpet> if your already there, might fixing "Colud" to Could in 53af3b7
|
|
That way, we can deprecate fields later on without problems
|
|
arrays
As long as the number of array entries is relatively small it's nicer to
simply return the number of entries directly, instead of using a size_t*
return parameter for it.
|
|
Constructors should return the object they created as first parameter,
except when they are generated as a child/member object of some other
object in which case that should be first.
|
|
One missing string found.
A few things had to be moved around to make it possible to test them.
|
|
|
|
If we want to avoid reading a totally empty file, it seems better
to check after we have opened the file, not before.
|
|
Special care is needed so that we get an error message if the
file failed to parse, but not when it is missing. To avoid duplicating
the same error check in every caller, add an additional 'warn' boolean
to tell config_parse whether a message should be issued.
This makes things both shorter and more robust wrt. to error reporting.
|
|
|
|
|
|
Suggested by poma.
|
|
It appears there is no good way to decide whether or not broadcasts should be enabled,
there is hardware that must have broadcast, and there are networks that only allow
unicast. So we give up and make this configurable.
By default, unicast is used, but if the kernel were to inform us abotu certain
interfaces requiring broadcast, we could change this to opt-in by default in
those cases.
|
|
Make link_initialized() idempotent to avoid taking refs on several udev_device
objects.
|
|
|
|
Split each netdev kind into its own .h/.c.
|
|
We now:
- parse config
- match on environment
- verify and complement config
- create netdev
|
|
|
|
Enslave only really makes sense when referring to bridges and bonds, so try to be
a bit more neutral.
|
|
This was accidentally dropped when adding metric support.
|
|
|
|
Vendor Class Identifier be used by DHCP clients to identify
their vendor type and configuration. When using this option,
vendors can define their own specific identifier values, such
as to convey a particular hardware or operating system
configuration or other identifying information.
Vendor-specified DHCP options—features that let administrators assign
separate options to clients with similar configuration requirements.
For example, if DHCP-aware clients for example we want to separate
different gateway and option for different set of people
(dev/test/hr/finance) in a org or devices for example web/database
servers or let's say in a embedded device etc and require a different
default gateway or DNS server than the rest of clients.
|
|
Now route metric can be configuted via conf file:
example conf:
[Match]
Name=em1
[Route]
Gateway=192.168.1.12
Metric=10
Test:
ip route output
default via 192.168.1.12 dev em1 metric 10
[tomegun: squash TODO update and reword man page a bit]
|
