summaryrefslogtreecommitdiff
path: root/src/network
AgeCommit message (Collapse)Author
2015-01-19networkd: netdev - add ipvlan supportTom Gundersen
2015-01-13networkd: propagate IPFoward= per-interface setting also to ↵Lennart Poettering
/proc/sys/net/ipv4/ip_forward We need to turn on /proc/sys/net/ipv4/ip_forward before the per-interface forwarding setting is useful, hence let's propagate the per-interface setting once to the system-wide setting. Due to the unclear ownership rules of that flag, and the fact that turning it on also has effects on other sysctl flags we try to minimize changes to the flag, and only turn it on once. There's no logic to turning it off again, but this should be fairly unproblematic as the per-interface setting defaults to off anyway.
2015-01-13networkd: make IP forwarding for IPv4 and IPv6 individually configurableLennart Poettering
2015-01-13networkd: rename misnamed booleanLennart Poettering
2015-01-13networkd: introduce an AddressFamilyBoolean enum typeLennart Poettering
This introduces am AddressFamilyBoolean type that works more or less like a booleaan, but can optionally turn on/off things for ipv4 and ipv6 independently. THis also ports the DHCP field over to it.
2015-01-13networkd: add minimal IP forwarding and masquerading support to .network filesLennart Poettering
This adds two new settings to networkd's .network files: IPForwarding=yes and IPMasquerade=yes. The former controls the "forwarding" sysctl setting of the interface, thus controlling whether IP forwarding shall be enabled on the specific interface. The latter controls whether a firewall rule shall be installed that exposes traffic coming from the interface as coming from the local host to all other interfaces. This also enables both options by default for container network interfaces, thus making "systemd-nspawn --network-veth" have network connectivity out of the box.
2015-01-11network: apply static addresses in specified orderZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=83270
2015-01-01networkctl: avoid potential use of unitialized variablesZbigniew Jędrzejewski-Szmek
Those values are based on a file we read from disk, so we should verify everything we receive, and make sure everything we print is sensible. Also, print fractional seconds for TTL.
2015-01-01networkctl: remove unused variableZbigniew Jędrzejewski-Szmek
2015-01-01network: fix scanf/printf formatZbigniew Jędrzejewski-Szmek
usec_t is defined as 64 bit wide, but long is 32 bit on many archs.
2014-12-31networkctl: fix strappend() error checkingDavid Herrmann
Make sure to test the right variable for NULL.
2014-12-19networkd: link - plug leakTom Gundersen
2014-12-19networkctl: lldp - respect arg_legendTom Gundersen
2014-12-19LLDP: Add support for networkctlSusant Sahani
2014-12-19networkd: integrate LLDPSusant Sahani
This patch integrates LLDP with networkd. Example conf: file : lldp.network [Match] Name=em1 [Network] LLDP=yes
2014-12-19networkctl: port to verbs helperTom Gundersen
2014-12-18networkd: add FDB supportAlin Rauta
2014-12-15networkctl: port from libudev to sd-hwdbTom Gundersen
2014-12-15networkd: failing to track links is a serious problem so log at warning ↵Tom Gundersen
level rather than debug
2014-12-12networkctl: remove unused variableThomas Hindoe Paaboel Andersen
2014-12-12networkctl: also draw a nice unicode cirlce when "networkctl status" is run ↵Lennart Poettering
without parameters
2014-12-12networkctl: show interface names next to IP addresses if we dump adresses ↵Lennart Poettering
from all interfaces
2014-12-12networkctl: also show gateway address when "networkctl status" without ↵Lennart Poettering
further arguments is passed
2014-12-12networkctl: show MAC address OUI vendor next to MAC addressesLennart Poettering
2014-12-11networkd/resolved: correct spacing near eol in code commentsTorstein Husebø
2014-12-10networkd: rename section [BridgePort] → [Bridge]Lennart Poettering
Let's stick to generic sections that describe the general technology, instead of specific per-object sections, unless we really have a reason to do that otherwise.
2014-12-10networkd-dhcp6: Support ICMPv6 Other informationPatrik Flykt
When ICMPv6 Other information is received, enable Information request in DHCPv6. If the DHCPv6 client already exists, only update the client if there is a transition from Other to Managed state.
2014-12-10networkd-dhcp6: Move ICMPv6 and DHCPv6 configuration to new filePatrik Flykt
Handle all aspects of ICMPv6 and DHCPv6 in a file of its own as is done with DHCPv4 and IPv4LL.
2014-12-09networkd: remove unused variableThomas Hindoe Paaboel Andersen
It is no longer used after 45af44d47da6933b260c734ad9ff721f63f80a4d
2014-12-08networkd: manager - enumerate addresses globally, rather than per-linkTom Gundersen
The kernel always returns all addresses, rather than only for the given link, so let's only enumerate once.
2014-12-08networkd: link - typoTom Gundersen
2014-12-08networkd: route - ignore unknown address familyTom Gundersen
2014-12-08udev: link-config - simplify net-matchTom Gundersen
2014-12-08Check return value from reading name_assign_type attrDave Reisner
This file won't exist on kernels earlier than 3.17.
2014-12-05net_setup/networkd: warn if matching is done on possibly unstable ifnameTom Gundersen
2014-12-05networkd: add basic [Link] settings to .network filesTom Gundersen
This allows the default link settings (set in .link files) to be overridden per Network. Only MTU and MACAddress is supported for now.
2014-12-04udev: net_setup - allow matching on OriginalName=Tom Gundersen
This has been requested repeatedly, so let's give it a go. We explicitly do not allow matching on names that have already been changed (from a previous udev run, or otherwise), and matching on unpredictable names (ethX) is discouraged (but not currently disallowed). We also currently allow: [Match] Name=veth0 [Link] Name=my-name0 SomeOtherSetting=true Which means that the link file will be applied the first time it is invoked, but not on subsequent invocations, which may be surprising.
2014-12-04networkd: tunnel - allow INADDR_ANY as the local addressTom Gundersen
2014-12-04networkd: add support for source routingTom Gundersen
2014-12-04networkd: fix compileTom Gundersen
Rebase failure on my side.
2014-12-04networkctl: use the shared functions for enumerating the local gatewaysTom Gundersen
2014-12-04networkd: Add bridge port path costSusant Sahani
This patch add support to specify path cost of the bridge port to be configured via conf file. Exampe: conf file: br.netdev [NetDev] Name=br-test Kind=bridge file: br.network [Match] Name=em1 [Network] Bridge=br-test [BridgePort] Cost=332 bridge link 2: em1 state UP : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br-test state disabled priority 32 cost 332
2014-12-04networkd: support vxlan parametersSusant Sahani
V3: fix copy paste error V4: Make manual and config more readable Add vxlan paramertes to config.
2014-12-04rtnl: when querying local addresses and gateways, take address family into ↵Lennart Poettering
account
2014-12-03networkctl: remove unused variableThomas Hindoe Paaboel Andersen
2014-12-03networkd: fix typoTorstein Husebø
V2: found another one
2014-12-02shared: add format helpers for printing MAC addressesTom Gundersen
Use these in networctl.
2014-12-02networkctl: print the Gateway in the status outputTom Gundersen
This is the IP address of the default route on the link, if present. A description is printed when available (the manufacturer of the gateway NIC based on its MAC address). In the future we should prefer LLDP information over MAC info.
2014-11-30network: remove unused variableRonny Chevalier
2014-11-28treewide: another round of simplificationsMichal Schmidt
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno + return simplifications".