| Age | Commit message (Collapse) | Author |
|---|
|
When ICMPv6 Other information is received, enable Information request
in DHCPv6. If the DHCPv6 client already exists, only update the client
if there is a transition from Other to Managed state.
|
|
Handle all aspects of ICMPv6 and DHCPv6 in a file of its own as is done
with DHCPv4 and IPv4LL.
|
|
It is no longer used after 45af44d47da6933b260c734ad9ff721f63f80a4d
|
|
The kernel always returns all addresses, rather than only for the given link, so let's only enumerate once.
|
|
|
|
|
|
|
|
This file won't exist on kernels earlier than 3.17.
|
|
|
|
This allows the default link settings (set in .link files) to be overridden per Network. Only MTU and MACAddress is supported for now.
|
|
This has been requested repeatedly, so let's give it a go. We explicitly do not allow matching
on names that have already been changed (from a previous udev run, or otherwise), and matching
on unpredictable names (ethX) is discouraged (but not currently disallowed).
We also currently allow:
[Match]
Name=veth0
[Link]
Name=my-name0
SomeOtherSetting=true
Which means that the link file will be applied the first time it is invoked, but
not on subsequent invocations, which may be surprising.
|
|
|
|
|
|
Rebase failure on my side.
|
|
|
|
This patch add support to specify path cost of the
bridge port to be configured via conf file.
Exampe: conf
file: br.netdev
[NetDev]
Name=br-test
Kind=bridge
file: br.network
[Match]
Name=em1
[Network]
Bridge=br-test
[BridgePort]
Cost=332
bridge link
2: em1 state UP : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master
br-test state disabled priority 32 cost 332
|
|
V3: fix copy paste error
V4: Make manual and config more readable
Add vxlan paramertes to config.
|
|
account
|
|
|
|
V2: found another one
|
|
Use these in networctl.
|
|
This is the IP address of the default route on the link, if present. A
description is printed when available (the manufacturer of the gateway NIC based
on its MAC address).
In the future we should prefer LLDP information over MAC info.
|
|
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
|
|
|
Basically:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \
$f; done
Plus manual indentation fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
rest of the code
|
|
|
|
- Rename log_meta() → log_internal(), to follow naming scheme of most
other log functions that are usually invoked through macros, but never
directly.
- Rename log_info_object() to log_object_info(), simply because the
object should be before any other parameters, to follow OO-style
programming style.
|
|
log_error_errno() as log calls that take error numbers
This change has two benefits:
- The format string %m will now resolve to the specified error (or to
errno if the specified error is 0. This allows getting rid of a ton of
strerror() invocations, a function that is not thread-safe.
- The specified error can be passed to the journal in the ERRNO= field.
Now of course, we just need somebody to convert all cases of this:
log_error("Something happened: %s", strerror(-r));
into thus:
log_error_errno(-r, "Something happened: %m");
|
|
We got the following error when running systemd on a device with many ports:
"rtnl: kernel receive buffer overrun
Event source 'rtnl-receive-message' returned error, disabling: No buffer space
available"
I think the kernel socket receive buffer queue should be increased. The default
value is taken from:
"/proc/sys/net/core/rmem_default", but we can overwrite it using SO_RCVBUF
socket option.
This is already done in networkd for other sockets.
For example, the bus socket (sd-bus/bus-socket.c) has a receive queue of 8MB.
In our case, the default is 208KB.
Increasing the buffer receive queue for manager socket to 512KB should be enough
to get rid of the above error.
[tomegun: bump the limit even higher to 8M]
|
|
For IPv6, the kernel returns EINVAL if a route is added with the
RTA_GATEWAY attribute set to in6addr_any (::). A route without a
gateway is useful in some situations, such as layer 3 tunneling
(sit, gre, etc.).
This patch prevents the RTA_GATEWAY attribute from being added
when route.in_addr is ip6addr_any (::).
|
|
Based on patch by Dan Williams.
|
|
IFLA_IPTUN_LINK -> VETH_INFO_PEER
|
|
|
|
Now that we only have one file with condition implementations around, we
can drop the -util suffix and simplify things a bit.
|
|
To mirror the recent name change of the concept for sd_bus objects,
follow the same logic for sd_event_source objects, too.
|
|
Add path of MTU disovery for IPIP and GRE Kind of tunnels
|
|
|
|
address class
In case of a class E or F address, ignore the address.
|
|
|
|
Like Infiniband. See RFC 4390 section 2.1 for details on DHCP
and Infiniband; chaddr is zeroed, hlen is set to 0, and htype
is set to ARPHRD_INFINIBAND because IB hardware addresses
are 20 bytes in length.
|
|
systemctl would print 'CPUQuotaPerSecUSec=(null)' for no limit. This
does not look right.
Since USEC_INFINITY is one of the valid values, format_timespan()
could return NULL, and we should wrap every use of it in strna() or
similar. But most callers didn't do that, and it seems more robust to
return a string ("infinity") that makes sense most of the time, even
if in some places the result will not be grammatically correct.
|
|
Found by coverity. CID #1237529 and #1237528.
|
|
sd_bus_message_get_errno can currently return either a number of
different poitive errno values (from bus-error-mapping), or a negative
EINVAL if passed null as parameter.
The check for null parameter was introduced in 40ca29a1370379d43e44c0ed425eecc7218dcbca
at the same as the function was renamed from bus_message_to_errno and
made public API. Before becoming public the function used to return
only negative values.
It is weird to have a function return both positive and negative errno
and it generally looks like a mistake. The function is guarded by the
--enable-kdbus flags so I wonder if we still have time to fix it up?
It does not have any documentation yet. However, except for a few details
it is just a convenient way to call sd_bus_error_get_errno which is documented
to return only positive errno.
This patch makes it return only positive errno and fixes up the two
calls to the function that tried to cope with both positive and negative
values.
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
