summaryrefslogtreecommitdiff
path: root/src/network
AgeCommit message (Collapse)Author
2015-11-13networkd: check explicit state rather than link->networkTom Gundersen
When deserializing we can now have an attached network without the various clients yet having been configured. Hence, don't misused the link->network as a check to determine if a link is ready to be used, but check the state explicitly.
2015-11-13networkd: dhcp6 - don't log about losing a lease we never hadTom Gundersen
2015-11-13networkd: stop managing per-interface IP forwarding settingsLennart Poettering
As it turns out the kernel does not support per-interface IPv6 packet forwarding controls (unlike as it does for IPv4), but only supports a global option (#1597). Also, the current per-interface management of the setting isn't really useful, as you want it to propagate to at least one more interface than the one you configure it on. This created much grief (#1411, #1808). Hence, let's roll this logic back and simplify this again, so that we can expose the same behaviour on IPv4 and IPv6 and things start to work automatically again for most folks: if a network with this setting set is set up we propagate the setting into the global setting, but this is strictly one-way: we never reset it again, and we do nothing for network interfaces where this setting is not enabled. Fixes: #1808, #1597.
2015-11-13networkd: rearrange checks when to write something into sysctl a bitLennart Poettering
Move check whether ipv6 is available into link_ipv6_privacy_extensions() to keep it as internal and early as possible. Always check if there's a network attached to a link before we apply sysctls. We do this for most of the sysctl functions already, with this change we do it for all.
2015-11-13networkd: fix a couple of format string typesLennart Poettering
We really should use %i for ints, and %u for unsigneds, and be careful what we pick depending on the type we want to print.
2015-11-13util-lib: optionally, when writing a string to a file, verify string on failureLennart Poettering
With this change, the idiom: r = write_string_file(p, buf, 0); if (r < 0) { if (verify_one_line_file(p, buf) > 0) r = 0; } gets reduced to: r = write_string_file(p, buf, WRITE_STRING_FILE_VERIFY_ON_FAILURE); i.e. when writing the string fails and the new flag WRITE_STRING_FILE_VERIFY_ON_FAILURE is specified we'll not return a failure immediately, but check the contents of the file. If it matches what we wanted to write we suppress the error and exit cleanly.
2015-11-11networkd: link - drop foreign config when configuring linkTom Gundersen
This is a change in behavior: Before we would never remove any state, only add to it, we now drop unwanted state from any link the moment we start managing it. Note however, that we still will not remove any foreign state added at runtime, to avoid any feedback loops. However, we make no guarantees about coexisting with third-party tools that change the state of the links we manage.
2015-11-11networkd: improve loggingTom Gundersen
2015-11-11networkd: link - track state of IPv6LL addressTom Gundersen
This is managed by the kernel, but we should track whether or not we have a configured IPv6LL address. This fixes two issues: - we now wait for IPv6LL before considering the link ready - we now wait for IPv6LL before attempting to do NDisc or DHCPv6 these protocols relies on an LL address being available.
2015-11-11networkd: ndisc - handle router advertisement in userspaceTom Gundersen
Router Discovery is a core part of IPv6, which by default is handled by the kernel. However, the kernel implementation is meant as a fall-back, and to fully support the protocol a userspace implementation is desired. The protocol essentially listens for Router Advertisement packets from routers on the local link and use these to configure the client automatically. The four main pieces of information are: what kind (if any) of DHCPv6 configuration should be performed; a default gateway; the prefixes that should be considered to be on the local link; and the prefixes with which we can preform SLAAC in order to pick a global IPv6 address. A lot of additional information is also available, which we do not yet fully support, but which will eventually allow us to avoid the need for DHCPv6 in the common case. Short-term, the reason for wanting this is in userspace was the desire to fully track all the addresses on links we manage, and that is not possible for addresses managed by the kernel (as the kernel does not expose to us the fact that it manages these addresses). Moreover, we would like to support stable privacy addresses, which will soon be mandated and the legacy MAC-based global addresses deprecated, to do this well we need to handle the generation in userspace. Lastly, more long-term we wish to support more RA options than what the kernel exposes.
2015-11-11networkd: IPv6 router discovery - follow IPv6AcceptRouterAdvertisemnt=Tom Gundersen
The previous behavior: When DHCPv6 was enabled, router discover was performed first, and then DHCPv6 was enabled only if the relevant flags were passed in the Router Advertisement message. Moreover, router discovery was performed even if AcceptRouterAdvertisements=false, moreover, even if router advertisements were accepted (by the kernel) the flags indicating that DHCPv6 should be performed were ignored. New behavior: If RouterAdvertisements are accepted, and either no routers are found, or an advertisement is received indicating DHCPv6 should be performed, the DHCPv6 client is started. Moreover, the DHCP option now truly enables the DHCPv6 client regardless of router discovery (though it will probably not be very useful to get a lease withotu any routes, this seems the more consistent approach). The recommended default setting should be to set DHCP=ipv4 and to leave IPv6AcceptRouterAdvertisements unset.
2015-11-11networkd: dhcp6 - split up configure() methodTom Gundersen
Enabling address acquisition, configuring the client and starting the client are now split out. This to better handle the client being repeatedly enabled due to router advertisements.
2015-11-11sd-ndisc: introduce separate callbacksTom Gundersen
As the data passed is very different, we introduce four different callbacks: - Generic - router discovery timed out or state machine stopped - Router - router and link configuration received - Prefix onlink - configuration for an onlink prefix received - Prefix autonomous - configuration for to configure a SLAAC address for a prefix received
2015-11-11sd-ndisc: notify user on STOPTom Gundersen
Also, stop the state machine when we get into a broken state, rather than just notify the user.
2015-11-11networkd: address - drop the 'added' flagTom Gundersen
Instead instantiate the kernel flags to TENTATIVE until the kernel updates us with the real value.
2015-11-11networkd: dhcp4 - style fixesTom Gundersen
2015-11-10networkctl: lldp port to extract_first_wordSusant Sahani
2015-11-10bond: port to extract_first_wordSusant Sahani
2015-11-10networkd: Add support to configure IPV6 hop limitSusant Sahani
This patch adds support to configure IPV6 hop limit. For example: /proc/sys/net/ipv6/conf/wlp3s0/hop_limit
2015-11-09Merge pull request #1629 from ssahani/vxlanTom Gundersen
networkd: vxlan add option to set FDB entries
2015-11-06networkd: fix option name in log messageMichal Sekletar
2015-11-03networkd: bridge prop convert to jiffiesSusant Sahani
2015-11-03Merge pull request #1726 from teg/networkd-2Daniel Mack
networkd: (de)serialize more state and support expiring routes
2015-11-03networkd: vxlan add option to set FDB entriesSusant Sahani
Add support to configures maximum number of FDB entries.
2015-11-03parse-util: introduce parse_ifindex() and make use of it everywhereLennart Poettering
We have enough places where we parse an ifindex, hence introduce a proper parsing function for it, that verifies all parameters.
2015-10-30networkd: link - port to extract_first_word()Tom Gundersen
2015-10-30networkd: route - add expiration supportTom Gundersen
This should really live in the kernel, but the netlink API currently does not support it. Until support has been added, expire the route from userspace.
2015-10-30networkd: link - deserialize routesTom Gundersen
2015-10-30networkd: link - (de)serialize IPv4LL and DHCPv4 addressesTom Gundersen
This initializes the clients to try rebinding the preexisting addresses before doing anything else.
2015-10-30networkd: link - deserializeTom Gundersen
For now only deserialize some basic state and the applied addresses. When a link is added, try to deserialize it's state from /run. This is relevant only when networkd is restarted at runtime.
2015-10-30networkd: link - serialize routesTom Gundersen
2015-10-30networkd: route - track routesTom Gundersen
2015-10-30networkd: address - properly take over a foreign addressTom Gundersen
2015-10-30networkd: address - update link operstate when address is updatedTom Gundersen
The operstate may change based on address properties, so make a change of address trigger an operstate update.
2015-10-30networkd: route - clean up confusion between 'metric' and 'priority'Tom Gundersen
Different tools use different terms for the same concept, let's try to stick with 'priority', as that is what the netlink API uses.
2015-10-30networkd: route - rename fields in structTom Gundersen
2015-10-29network: fix use-after-free in link_freeHristo Venev
Freeing a link removes it both from addresses and addresses_foreign, causing SIGSEGV if one of the sets is freed.
2015-10-27util-lib: split out allocation calls into alloc-util.[ch]Lennart Poettering
2015-10-27util-lib: split out printf() helpers to stdio-util.hLennart Poettering
2015-10-27src/basic: rename audit.[ch] → audit-util.[ch] and capability.[ch] → ↵Lennart Poettering
capability-util.[ch] The files are named too generically, so that they might conflict with the upstream project headers. Hence, let's add a "-util" suffix, to clarify that this are just our utility headers and not any official upstream headers.
2015-10-27util-lib: move more locale-related calls to locale-util.[ch]Lennart Poettering
2015-10-27util-lib: move string table stuff into its own string-table.[ch]Lennart Poettering
2015-10-27util-lib: split stat()/statfs()/stavfs() related calls into stat-util.[ch]Lennart Poettering
2015-10-27util-lib: move more file I/O related calls into fileio.[ch]Lennart Poettering
2015-10-27util-lib: split string parsing related calls from util.[ch] into parse-util.[ch]Lennart Poettering
2015-10-26util-lib: split out user/group/uid/gid calls into user-util.[ch]Lennart Poettering
2015-10-25Merge pull request #1668 from ssahani/net1Tom Gundersen
networkd: fix asserts
2015-10-25util-lib: split out fd-related operations into fd-util.[ch]Lennart Poettering
There are more than enough to deserve their own .c file, hence move them over.
2015-10-25vxlan: fix assertSusant Sahani
2015-10-25veth: fix assertSusant Sahani