| Age | Commit message (Collapse) | Author |
|---|
|
Fixup for #3304.
Only warn, and not return, because that's what sd_dhcp6_client_start()
does right below the call to sd_dhcp6_client_set_local_address().
|
|
[networkd] ndisc DHCPv6 triggering fixes
|
|
networkd: Drop IPv6LL address when link is down.
|
|
minor improvements for dealing with MAC Addresses
|
|
dhcp6_request_address()
Starting the DHCP client doesn't seem like dhcp6_request_address()'s responsibility anyway. Whenever it's called, sd_dhcp6_client_start() is unconditionally called outside of it as well. See ndisc_router_handler() and ndisc_handler() in networkd-ndisc.c.
|
|
Fix issue #3256 and probably #1982. Referenced link_acquire_ipv6_conf() in networkd-link.c.
|
|
Now we are not dropping the IPv6LL address when link is down.
So next time when link is up and before kernel acquired this address
we are using the old address.
When the link is down kernel tells us that this address is no longer
valid . Let's remove this address and again when kernel tells us
that the address is added let's use it.
fixes #3264
|
|
This is partial fix for #2228 and #2977, #3204.
bridge-test: netdev ready
docker0: Gained IPv6LL
wlan0: Gained IPv6LL
eth0: Gained IPv6LL
Enumeration completed
bridge-test: netdev exists, using existing without changing its
parameters
vboxnet0: IPv6 enabled for interface: Success
lo: Configured
docker0: Could not drop address: No such process
vboxnet0: Gained carrier
wlan0: Could not drop address: No such process
eth0: Could not drop address: No such process
eth0: Could not drop address: No such process
eth0: Could not drop address: No such process
vboxnet0: Gained IPv6LL
vboxnet0: Could not set NDisc route or address: Invalid argument
vboxnet0: Failed
[New Thread 0x7ffff6505700 (LWP 1111)]
[Thread 0x7ffff6505700 (LWP 1111) exited]
Assertion 'link->state == LINK_STATE_SETTING_ROUTES' failed at
src/network/networkd-link.c:672, function link_enter_configured().
Aborting.
Program received signal SIGABRT, Aborted.
0x00007ffff6dc6a98 in raise () from /lib64/libc.so.6
Missing separate debuginfos, use: dnf debuginfo-install
iptables-1.4.21-15.fc23.x86_64 libattr-2.4.47-14.fc23.x86_64
libidn-1.32-1.fc23.x86_64 pcre-8.38-7.fc23.x86_64
Debugging
(gdb) bt
"link->state == LINK_STATE_SETTING_ROUTES", file=0x5555556a34c8
"src/network/networkd-link.c", line=672,
func=0x5555556a56d0 <__PRETTY_FUNCTION__.14850>
"link_enter_configured") at src/basic/log.c:788
src/network/networkd-link.c:672
src/network/networkd-link.c:720
flags=0 '\000', scope=0 '\000', cinfo=0x7fffffffe020) at
src/network/networkd-address.c:344
(rtnl=0x5555556eded0, message=0x55555570ff20, userdata=0x5555556ec590)
at src/network/networkd-manager.c:604
m=0x55555570ff20) at src/libsystemd/sd-netlink/sd-netlink.c:365
at src/libsystemd/sd-netlink/sd-netlink.c:395
ret=0x0) at src/libsystemd/sd-netlink/sd-netlink.c:429
revents=1, userdata=0x5555556eded0) at
src/libsystemd/sd-netlink/sd-netlink.c:723
src/libsystemd/sd-event/sd-event.c:2268
src/libsystemd/sd-event/sd-event.c:2629
timeout=18446744073709551615) at src/libsystemd/sd-event/sd-event.c:2688
bus=0x5555556eeba0, name=0x55555568a2f5 "org.freedesktop.network1",
timeout=30000000,
check_idle=0x55555556adb6 <manager_check_idle>,
userdata=0x5555556ec590) at src/shared/bus-util.c:134
src/network/networkd-manager.c:1130
src/network/networkd.c:127
(gdb) f 3
src/network/networkd-link.c:672
672 assert(link->state == LINK_STATE_SETTING_ROUTES);
(gdb) p link->state
$1 = LINK_STATE_FAILED
We should not be in this state .
even if vboxnet0 failed we went into this state.
vboxnet0: Could not set NDisc route or address: Invalid argument
vboxnet0: Failed
|
|
Fix for #3232.
|
|
Add an option to disable appending DHCP option 3 (Router) to the DHCP
OFFER and ACK packets.
This commit adds the boolean option EmitRouter= for the [DHCPServer]
section in .network files.
Rationale: On embedded devices, it is very useful to have a DHCP server
running on an USB OTG ethernet gadget interface to avoid manual setup on
the client PCs, but it should only serve IP addresses, no route(r)s.
Otherwise, Windows clients experience network connectivity issues, due
to them using the address set in DHCP option 3 as default gateway.
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
|
|
networkd currently silently accepts some strings as MAC addresses that it
probably shouldn't (like "ab:cd:ef:12:34:56:78" and "ab:cd:ef:12:3 4:56").
Add tests to MAC address parsing to ensure that we only accept valid MAC
addresses, and that we accept the three most common forms of MAC address
(colon-delimited hex, IEEE, and Cisco)
Several of these tests currently fail, but another commit in this series will
resolve them.
|
|
Small networkd cleanup
|
|
Also adjust indentation in various places.
|
|
While creating a VLAN the mac address should be copied from the parent interface, so that
the VLANs inherit the MAC address of the physical interface.
Before:
```
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
...
6: vlan1@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 22:07:73:9d:43:59 brd ff:ff:ff:ff:ff:ff
7: vlan2@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 46:30:76:33:35:d4 brd ff:ff:ff:ff:ff:ff
```
After:
```
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
...
11: vlan1@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
12: vlan2@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
```
v2 of #1573, with fixed commit message.
|
|
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute
it can change the multicast snooping value.
IGMP snooping monitors the Internet Group Management Protocol (IGMP)
traffic between hosts and multicast routers.
|
|
|
|
It is just an alias for route_free which requires that route is not null,
but it was only used in one place where it was checked that route is not
null anyway. Let's just call route_free instead.
|
|
Fix "preset-all" with dangling symlinks and install-section hint emitted too eagerly
|
|
That function doesn't draw anything on it's own, just returns a string, which
sometimes is more than one character. Also remove "DRAW_" prefix from character
names, TREE_* and ARROW and BLACK_CIRCLE are unambigous on their own, don't
draw anything, and are always used as an argument to special_glyph().
Rename "DASH" to "MDASH", as there's more than one type of dash.
|
|
This allows selecting the propagation level of emitted LLDP packets
(specifically: the destination MAC address of the packets). This is useful
because it allows generating LLDP packets that optionally cross certain types
of bridges.
See 802.11ab-2009, Table 7-1 for details.
|
|
|
|
It's only relevant to DHCP, and it should be where the DUID is configured too.
|
|
networkd lib: cleanup FOREACH_WORD
|
|
|
|
|
|
|
|
* gitignore: typo fix for test-networkd-conf
* networkd: fix double include
|
|
Rework DUID setting
|
|
Closes #2166.
We only allow 0, infinity and forever.
infinity and forever is same.
|
|
networkd: add support to set route table
1. add support to configure the table id.
if id is less than 256 we can fit this in the header of route as
netlink property is a char. But in kernel this proepty is a
unsigned 32. Hence if greater that 256 add this as RTA_TABLE
attribute.
2. we are not setting the address family now. Now set this property.
|
|
It wasn't used for anything after the recent changes.
|
|
|
|
Separate fields are replaced with a struct.
Second second duid type field is removed. The first field was used to carry
the result of DUIDType= configuration, and the second was either a copy of
this, or contained the type extracted from DuidRawData. The semantics are changed
so that the type specified in DUIDType is always used. DUIDRawData= no longer
overrides the type setting.
The networkd code is now more constrained than the sd-dhcp code:
DUIDRawData cannot have 0 length, length 0 is treated the same as unsetting.
Likewise, it is not possible to set a DUIDType=0. If it ever becomes necessary
to set type=0 or a zero-length duid, the code can be changed to support that.
Nevertheless, I think that's unlikely.
This addresses #3127 § 1 and 3.
v2:
- rename DUID.duid, DUID.duid_len to DUID.raw_data, DUID.raw_data_len
|
|
Both versions of the code are changed to allow the caller to override
DUID using simple rules: duid type and value may be specified, in
which case the caller is responsible to providing the contents,
or just duid type may be specified as DUID_TYPE_EN, in which case we
we fill in the values. In the future more support for other types may
be added, e.g. DUID_TYPE_LLT.
There still remains and ugly discrepancy between dhcp4 and dhcp6 code:
dhcp6 has sd_dhcp6_client_set_duid and sd_dhcp6_client_set_iaid and
requires client->state to be DHCP6_STATE_STOPPED, while dhcp4 has
sd_dhcp_client_set_iaid_duid and will reconfigure the client if it
is not stopped. This commit doesn't touch that part.
This addresses #3127 § 2.
|
|
Header files were organized in a way where the includer would add various
typedefs used by the includee before including it, resulting in a tangled
web of dependencies between files.
Replace this with the following logic:
networkd.h
/ \
networkd-link.h \
networkd-ipv4ll.h--\__\
networkd-fdb.h \
networkd-network.h netword-netdev-*.h
networkd-route.h \
networkd-netdev.h
If a pointer to a structure defined in a different header file is needed,
use a typedef line instead of including the whole header.
|
|
Let's move DUID configuration into the [DHCP] section, since it only makes
sense in a DHCP context, and should be close to the configuration of
ClientIdentifier= and suchlike.
This really shouldn't be a section of its own, we don't have any for any of our
other per-protocol specific identifiers...
Follow-up for #2890 #2943
|
|
Various small cleanups in shared code
|
|
Now we are not setting static address, start dhcp6 client and
discovering IPv6 routers after link gained carrier.
This fixes #2912.
|
|
|
|
It make more sense to initalize the node first then
we add to the list.
|
|
We are not able to add multiple properties.
wlp3s0.network:
[Match]
Name=wlp3s0
[Route]
Gateway=10.68.5.26
Metric=10
sudo ./systemd-networkd
Failed to parse file '/usr/lib/systemd/network/wlp3s0.network': File
exists
Could not load configuration files: File exists
This patch fixes it.
|
|
available in the kernel
|
|
|
|
If we not marking manager dirty when link is dirty then
the state file is not updated. This is a side effect of
issue 2850
setting CriticalConnection=yes
timesyncd NTP servers given by DHCP server are ignored.
|
|
This fixes #2282.
|
|
IPv6 protocol requires a minimum MTU of 1280 bytes on the interface.
This fixes #3046.
Introduce helper link_ipv6_enabled() to figure out whether IPV6 is enabled.
Introduce network_has_static_ipv6_addresses() to find out if any static
ipv6 address configured.
If IPv6 is not configured on any interface that is SLAAC, DHCPv6 and static
IPv6 addresses not configured, then IPv6 will be automatically disabled for that
interface, that is we write "1" to /proc/sys/net/ipv6/conf//disable_ipv6.
|
|
|
|
Fixes: #2889
|
|
We only use it for the Tx code anyway, hence sd-lldp.h shouldn't expose it, as
it only implements Rx.
|
|
Let's properly handle hashmap_put() failing.
|
