| Age | Commit message (Collapse) | Author |
|---|
|
Enable DHCPv6 support by creating a DHCPv6 boolean in the Network
section. Add necessary DHCPv6 structures and initial function calls.
|
|
address on the interface
This way we can make use of the addresses of the IP pool.
|
|
When an address is configured to be all zeroes, networkd will now
automatically find a locally unused network of the right size from a
list of pre-configured pools. Currently those pools are 10.0.0.0/8,
172.16.0.0/12, 192.168.0.0/16 and fc00::/7, i.e. the network ranges for
private networks. They are compiled in, but should be configurable
eventually.
This allows applying the same configuration to a large number of
interfaces with each time a different IP range block, and management of
these IP ranges is fully automatic.
When allocating an address range from the pool it is made sure the range
is not used otherwise.
|
|
of it everywhere
|
|
|
|
|
|
|
|
We were comparing against our own internal enum rather than the kernel exposed one.
Found by Thomas Ritter.
|
|
Unref tunnel while shutting down
|
|
This patch enables netwokd to create vxlan
Changes:
Added:
1. File networkd networkd-vxlan.c
2. to netdev
bool learning
struct in_addr group
uint64_t vxlanid;
3. VXLAN subsection and config
parameters
|
|
Rename the netdev variables. Remove tunnel_
so that it can be reused .
|
|
We could still have an old interface name and/or mac address when libudev
tells us that the device is initialized, as the up-to-date info could still
be on its way from the kernel.
|
|
netdev""
This reverts (and rewrites) commit 7d95c772cba1836545459760273b13f2e01dd2a8.
The issue blocking this feature has now been fixed in the kernel, and backported
to the various stable kernels.
Our netdevs will now have stable MAC addresses, even if one is not specified.
|
|
It may sometimes be necessary to specify the MAC address of a netdev.
Let us set the correct one from the get-go, rather than having the
kernel generate a random one, and then change it after.
|
|
It should not be possible to have a DHCP lease on a link without also having
an associated network. Add assert() to avoid compiler warnings.
Reported by Thomas H. P. Andersen
|
|
|
|
Still add some whitespace betwen ifname and the message to get the
messages aligned (as I find it easier to spot specific messages this way).
|
|
When enabled in [Network] it will set up a dhcp server on the interface, listening
on one of its statically configured IPv4 addresses and with a fixed size pool of
leases determined from it.
Example:
[Match]
Name=ve-arch-tree
[Network]
Address=192.168.12.5/24
DHCPServer=yes
[Route]
Gateway=192.168.12.5
Destination=192.168.12.0/24
In this case we will configure ve-arch-tree with the address 192.168.12.5 and
hand out addresses in the range 192.168.12.6 - 192.168.12.38.
In the future, we should (as suggested by Lennart) introduce a syntax to pick the
server address automatically.
|
|
Otherwise .netwrok matching on MAC address will not work.
Based on patch by Dave Reisner, and bug originally reported by Max Pray.
|
|
Configuration will be in
root:root /run/systemd/network
and state will be in
systemd-network:systemd-network /run/systemd/netif
This matches what we do for logind's seat/session state.
|
|
Rely on modules being built-in or autoloaded on-demand.
As networkd is a network facing service, we want to limits its capabilities,
as much as possible. Also, we may not have CAP_SYS_MODULE in a container,
and we want networkd to work the same there.
Module autoloading does not always work, but should be fixed by the kernel
patch f98f89a0104454f35a: 'net: tunnels - enable module autoloading', which
is currently in net-next and which people may consider backporting if they
want tunneling support without compiling in the modules.
Early adopters may also use a module-load.d snippet and order
systemd-modules-load.service before networkd to force the module
loading of tunneling modules.
This sholud fix the various build issues people have reported.
|
|
This patch enables vti tunnel support.
example conf:
file : vti.netdev
[NetDev]
Name=vti-tun
Kind=vti
MTUBytes=1480
[Tunnel]
Local=X.X.X.X
Remote=X.X.X.X
file: vti.network
[Match]
Name=em1
[Network]
Tunnel=vti-tun
TODO:
Add more attributes for vti tunnel
IFLA_VTI_IKEY
IFLA_VTI_OKEY
|
|
This patch adds path of mtu discovery for sit tunnel.
To enable/disable DiscoverPathMTU is introduced.
Example configuration
file: sit.netdev
[NetDev]
Name=sit-tun
Kind=sit
MTUBytes=1480
[Tunnel]
DiscoverPathMTU=1
Local=X.X.X.X
Remote=X.X.X.X
By default pmtudisc is turned on , if DiscoverPathMTU
is missing from the config. To turn it off
DiscoverPathMTU=0 needs to be set.
|
|
This patch enables gre tunnel support.
example conf:
file : gre.netdev
[NetDev]
Name=gre-tun
Kind=gre
MTUBytes=1480
[Tunnel]
Local=X.X.X.X
Remote=X.X.X.X
file: gre.network
[Match]
Name=em1
[Network]
Tunnel=gre-tun
TODO:
Add more attributes for gre tunnel
IFLA_GRE_IFLAGS
IFLA_GRE_IFLAGS
IFLA_GRE_IKEY
IFLA_GRE_OKEY
|
|
|
|
This patch adds veth device support to networkd.
Example conf:
File: veth.netdev
[NetDev]
Name=veth-test
Kind=veth
[Peer]
Name=veth-peer
|
|
This allows us to run networkd mostly unpriviliged with the exception of
CAP_NET_* and CAP_SYS_MODULE. I'd really like to get rid of the latter
though...
|
|
|
|
Djalal Harouni <tixxdz@opendz.org>:
There is also this one genrated by LTO, IMO it's a false positive since
we do *check* for "lease" but the code is not consistent since in that
code path, "lease" is initialized to NULL in other places, except for
this one:
src/resolve/resolved-manager.c: In function 'manager_update_resolv_conf':
src/libsystemd-network/sd-dhcp-lease.c:67:18: warning: 'lease' may be used uninitialized in this function [-Wmaybe-uninitialized]
if (lease->dns_size) {
^
src/network/sd-network.c:146:24: note: 'lease' was declared here
sd_dhcp_lease *lease;
^
|
|
This reverts commit 351efdc7a4d900a1aebca517dd0b46b89cdd7306.
|
|
Thanks to Kay for tracking this down.
|
|
|
|
This patch introduces sit tunnel support to networkd
Example conf:
file: sit.netdev
[NetDev]
Name=sit-tun
Kind=sit
MTUBytes=1480
[Tunnel]
Local=10.65.223.238
Remote=10.65.223.239
file: sit.network
[Match]
Name=em1
[Network]
Tunnel=sit-tun
[tomegun: rebased]
|
|
|
|
Expose states 'degraded' or 'routable' if a link has a site/link-local or a routable address, respectively.
|
|
|
|
|
|
|
|
Also remove the equivalent functionality from networkd.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We will still use the compiled-in defaults if no DNS entry exists in the config file.
|
|
This way we preserve the order of preference.
|
|
Similarly to NTP servers, this can be set at compile-time.
|
|
|
