| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Firstly, remove stray assert(). Also be a bit stricter when verifying the
received info. If we get an applicable newlink message that we can't make
sense of, we will now enter NETDEV_FAILED, as we cannot reasonably continue
without knowing the ifindex of our device.
|
|
We match 'newlink' messages with expected netdev's based on their names. Now also
make sure that the receieved link has the expected kind.
|
|
This does not belong in shared as it is mostly a detail of our networking subsystem.
Moreover, now we can use libudev here, which will simplify things.
|
|
Increase the chance of using the same link local address between reboots. The
pseudo random sequence of addresses we attempt is now seeded with data that is
very likely to stay the same between reboots, but at the same time be unique
to the specific machine/nic.
First we try to use the ID_NET_NAME_* data from the udev db combined with the
machin-id, which is guaranteed to be unique and persistent, if available. If
that is not possible (e.g., in containers where we don't have access to the
udev db) we fallback to using the MAC address of the interface, which is
guaranteed to be unique, and likely to be persistent.
[tomegun: three minor changes:
- don't expose HASH_KEY in the siphash24 header
- get rid of some compile-warnings (and some casts at the same time),
by using uint8_t[8] rather than uint64_t in the api
- added commit message]
|
|
Some DHCP servers gives you a netmask of 255.255.255.255 so the gateway is not
routable. Other DHCP client implementations look through the existing routes to
figure out if they should add an explicit host route. See below for a link.
However, it makes sense to just create the route explicitly whether it is
needed or not since it is explicit, makes the dhcp route entries independent of
other entries and saves us from knowing the state of the kernel tables.
After patch route table on a machine with a network (common case):
default via 10.0.2.2 dev ens3
10.0.2.0/24 dev ens3 proto kernel scope link src 10.0.2.15
10.0.2.2 dev ens3 scope link
After patch route table on a machine without a network (this case):
default via 10.240.0.1 dev ens4v1
10.240.0.1 dev ens4v1 scope link
The code from dhcpcd that works around this issue is on line 637.
https://android.googlesource.com/platform/external/dhcpcd/+/master/configure.c
|
|
Make sure the client objects exist for the lifetime of the Link.
|
|
Pass the mac address on to ipv4ll and dhcp clients so they always have
up-to-date information, and may react appropriately to the change.
Also drop setting the mac address from uevent, and only log when the
address actually changes.
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
|
|
It's HAVE_SPLIT_USR not HAVE_SPLIT_USER
|
|
|
|
|
|
This allows us to drop the repeated attempted creations of the runtime dirs during runtime.
|
|
This removes an accidentally left-over test fragment.
|
|
Open all listenerns before loading configuration.
|
|
|
|
Fixup for 76800848f281c3 'networkd: link - degrade failed UP to warning'.
|
|
Something else may still bring the link up, so don't enter failed state prematurely.
|
|
Bring some arrays that are used for DEFINE_STRING_TABLE_LOOKUP() in the
same order than the enums they reference.
Also, pass the corresponding _MAX value to the array initalizer where
appropriate.
|
|
|
|
With the new sd_rtnl_message_read_string(), there is no longer a need for
rtnl_message_get_ifname().
|
|
Bridges will change their MAC address when other devices are enslaved. We need
the correct MAC address to acquire a DHCP lease, so take note of it whenever
it changes.
|
|
This partially reverts commit 54abf46, which unintentionally removed the
enslaving support for bonding interfaces
|
|
Implements IPv4LL with respect to RFC 3927
(http://tools.ietf.org/rfc/rfc3927.txt) and integrates it
with networkd. Majority of the IPv4LL state machine is
taken from avahi (http://avahi.org/) project's autoip.
IPv4LL can be enabled by IPv4LL=yes under [Network]
section of .network file.
IPv4LL works independent of DHCP but if DHCP lease is
aquired, then LL address will be dropped.
[tomegun: removed a trailing newline and a compiler warning]
|
|
|
|
|
|
|
|
This is mostly a proof of concept to try sd-network, so we don't
hook it up with a .service file quite yet. We probably want it to
be more clever about deciding when we are 'online'.
The binary will wait for at least one network managed by networkd,
and until all networks managed by networkd are configured.
|
|
This is similar to sd-login, but exposes the state of networkd rather than logind.
Include it in libsystemd-dhcp and rename it to libsystemd-network.
|
|
|
|
|
|
|
|
Also fix a copy-paste error that broke matching on interface name.
|
|
|
|
|
|
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
If -flto is used then gcc will generate a lot more warnings than before,
among them a number of use-without-initialization warnings. Most of them
without are false positives, but let's make them go away, because it
doesn't really matter.
|
|
|
|
|
|
It should match on the driver of the parent device.
|
|
:(
Don't set set **ret when returning r < 0, as matching on the errno may easily
give false positives in the future leading to null pointer dereference.
Reported-by: David Herrmann <dh.herrmann@gmail.com>
|
|
Also enforce that we don't allow setting the Broadcast for IPv6 addresses.
|
|
This mimics the sd-bus api, as we may need it in the future.
|
|
Interface could go down before acquiring a dhcp lease
|
|
|
|
We can always know the size based on the type, so let's do this inside the library.
|
|
|
|
sd_rtnl_xxx_new_yyy()
So far we followed the rule to always indicate the "flavour" of
constructors after the "_new_" or "_open_" in the function name, so
let's keep things in sync here for rtnl and do the same.
|
