summaryrefslogtreecommitdiff
path: root/src/network
AgeCommit message (Collapse)Author
2014-06-26networkd: Properly stop router solicitation and DHCPv6 clientPatrik Flykt
When a link fails or looses carrier, always stop ongoing router solicitation and any DHCPv6 client that may be running.
2014-06-20missing.h: add various network enumsZbigniew Jędrzejewski-Szmek
We used to check if e.g. IFLA_BOND_MAX is defined and provide fallback values in missing.h is it wasn't. But over time, various kernel versions added IFLA_* defines, so checking for IFLA_BOND_MAX is not enough if the kernel is new enough to have some of them but too old to have all. In case we detect that the latest known enum value is missing, #define most of them. https://bugs.freedesktop.org/show_bug.cgi?id=80095
2014-06-20networkd: link - fix memleak of icmp6 structTom Gundersen
2014-06-20networkd: veth - fix creation of veth netdevTom Gundersen
Avoid freeing the netdev structure in the cleanup macro.
2014-06-19networkd: fix refcounting with UseMTU=yesSteven Noonan
The link was unintentionally being unreferenced instead of referenced for the MTU setup.
2014-06-19networkd: Add initial DHCPv6 supportPatrik Flykt
Enable DHCPv6 support by creating a DHCPv6 boolean in the Network section. Add necessary DHCPv6 structures and initial function calls.
2014-06-18networkd: configure dhcp server range only after successfully setting an IP ↵Lennart Poettering
address on the interface This way we can make use of the addresses of the IP pool.
2014-06-18networkd: add address pool supportLennart Poettering
When an address is configured to be all zeroes, networkd will now automatically find a locally unused network of the right size from a list of pre-configured pools. Currently those pools are 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16 and fc00::/7, i.e. the network ranges for private networks. They are compiled in, but should be configurable eventually. This allows applying the same configuration to a large number of interfaces with each time a different IP range block, and management of these IP ranges is fully automatic. When allocating an address range from the pool it is made sure the range is not used otherwise.
2014-06-18socket-util: introduce in_addr_union similar to sockaddr_union and make use ↵Lennart Poettering
of it everywhere
2014-06-17networkd: veth - fix parsing verificationTom Gundersen
2014-06-17networkd: vxlan - fix parsing verificationTom Gundersen
2014-06-17networkd: veth - fix memleakTom Gundersen
2014-06-17networkd: link - fix carrier check on new linkTom Gundersen
We were comparing against our own internal enum rather than the kernel exposed one. Found by Thomas Ritter.
2014-06-16networkd: unref tunnelSusant Sahani
Unref tunnel while shutting down
2014-06-16networkd: introduce vxlanSusant Sahani
This patch enables netwokd to create vxlan Changes: Added: 1. File networkd networkd-vxlan.c 2. to netdev bool learning struct in_addr group uint64_t vxlanid; 3. VXLAN subsection and config parameters
2014-06-16networkd: rename netdev variablesSusant Sahani
Rename the netdev variables. Remove tunnel_ so that it can be reused .
2014-06-14networkd: link - flush all pending NEWLINK events before trying to matchTom Gundersen
We could still have an old interface name and/or mac address when libudev tells us that the device is initialized, as the up-to-date info could still be on its way from the kernel.
2014-06-14Revert "Revert "networkd: netdev - set predictable mac address when creating ↵Tom Gundersen
netdev"" This reverts (and rewrites) commit 7d95c772cba1836545459760273b13f2e01dd2a8. The issue blocking this feature has now been fixed in the kernel, and backported to the various stable kernels. Our netdevs will now have stable MAC addresses, even if one is not specified.
2014-06-14networkd: netdev - allow setting MACAddress in .netdev filesTom Gundersen
It may sometimes be necessary to specify the MAC address of a netdev. Let us set the correct one from the get-go, rather than having the kernel generate a random one, and then change it after.
2014-06-14networkd: add assertTom Gundersen
It should not be possible to have a DHCP lease on a link without also having an associated network. Add assert() to avoid compiler warnings. Reported by Thomas H. P. Andersen
2014-06-13networkd: link - check returned value from set_lease_poolThomas Hindoe Paaboel Andersen
2014-06-13networkd: link - left-align debug messagesTom Gundersen
Still add some whitespace betwen ifname and the message to get the messages aligned (as I find it easier to spot specific messages this way).
2014-06-13networkd: add dhcp server supportTom Gundersen
When enabled in [Network] it will set up a dhcp server on the interface, listening on one of its statically configured IPv4 addresses and with a fixed size pool of leases determined from it. Example: [Match] Name=ve-arch-tree [Network] Address=192.168.12.5/24 DHCPServer=yes [Route] Gateway=192.168.12.5 Destination=192.168.12.0/24 In this case we will configure ve-arch-tree with the address 192.168.12.5 and hand out addresses in the range 192.168.12.6 - 192.168.12.38. In the future, we should (as suggested by Lennart) introduce a syntax to pick the server address automatically.
2014-06-04networkd: link - intialize mac addressTom Gundersen
Otherwise .netwrok matching on MAC address will not work. Based on patch by Dave Reisner, and bug originally reported by Max Pray.
2014-06-03networkd: split runtime config dir from state dirTom Gundersen
Configuration will be in root:root /run/systemd/network and state will be in systemd-network:systemd-network /run/systemd/netif This matches what we do for logind's seat/session state.
2014-06-03networkd: drop CAP_SYS_MODULETom Gundersen
Rely on modules being built-in or autoloaded on-demand. As networkd is a network facing service, we want to limits its capabilities, as much as possible. Also, we may not have CAP_SYS_MODULE in a container, and we want networkd to work the same there. Module autoloading does not always work, but should be fixed by the kernel patch f98f89a0104454f35a: 'net: tunnels - enable module autoloading', which is currently in net-next and which people may consider backporting if they want tunneling support without compiling in the modules. Early adopters may also use a module-load.d snippet and order systemd-modules-load.service before networkd to force the module loading of tunneling modules. This sholud fix the various build issues people have reported.
2014-06-02networkd: introduce vti tunnelSusant Sahani
This patch enables vti tunnel support. example conf: file : vti.netdev [NetDev] Name=vti-tun Kind=vti MTUBytes=1480 [Tunnel] Local=X.X.X.X Remote=X.X.X.X file: vti.network [Match] Name=em1 [Network] Tunnel=vti-tun TODO: Add more attributes for vti tunnel IFLA_VTI_IKEY IFLA_VTI_OKEY
2014-06-02networkd: sit-tunnel add support for pmtudiscSusant Sahani
This patch adds path of mtu discovery for sit tunnel. To enable/disable DiscoverPathMTU is introduced. Example configuration file: sit.netdev [NetDev] Name=sit-tun Kind=sit MTUBytes=1480 [Tunnel] DiscoverPathMTU=1 Local=X.X.X.X Remote=X.X.X.X By default pmtudisc is turned on , if DiscoverPathMTU is missing from the config. To turn it off DiscoverPathMTU=0 needs to be set.
2014-06-02networkd: introduce gre tunnelSusant Sahani
This patch enables gre tunnel support. example conf: file : gre.netdev [NetDev] Name=gre-tun Kind=gre MTUBytes=1480 [Tunnel] Local=X.X.X.X Remote=X.X.X.X file: gre.network [Match] Name=em1 [Network] Tunnel=gre-tun TODO: Add more attributes for gre tunnel IFLA_GRE_IFLAGS IFLA_GRE_IFLAGS IFLA_GRE_IKEY IFLA_GRE_OKEY
2014-06-02networkd-netdev: fix white spaceSusant Sahani
2014-06-02networkd: introduce veth device supportSusant Sahani
This patch adds veth device support to networkd. Example conf: File: veth.netdev [NetDev] Name=veth-test Kind=veth [Peer] Name=veth-peer
2014-06-01networkd: run as unpriviliged "systemd-network" userLennart Poettering
This allows us to run networkd mostly unpriviliged with the exception of CAP_NET_* and CAP_SYS_MODULE. I'd really like to get rid of the latter though...
2014-05-24Fix several small typosJonathan Boulle
2014-05-24sd-network: avoid false positive compiler warning caused by LTOTom Gundersen
Djalal Harouni <tixxdz@opendz.org>: There is also this one genrated by LTO, IMO it's a false positive since we do *check* for "lease" but the code is not consistent since in that code path, "lease" is initialized to NULL in other places, except for this one: src/resolve/resolved-manager.c: In function 'manager_update_resolv_conf': src/libsystemd-network/sd-dhcp-lease.c:67:18: warning: 'lease' may be used uninitialized in this function [-Wmaybe-uninitialized] if (lease->dns_size) { ^ src/network/sd-network.c:146:24: note: 'lease' was declared here sd_dhcp_lease *lease; ^
2014-05-22Revert "update gitignore"Kay Sievers
This reverts commit 351efdc7a4d900a1aebca517dd0b46b89cdd7306.
2014-05-21networkd: link - serialize link when addresses changeTom Gundersen
Thanks to Kay for tracking this down.
2014-05-21update gitignoreKay Sievers
2014-05-19networkd: introduce sit tunnelSusant Sahani
This patch introduces sit tunnel support to networkd Example conf: file: sit.netdev [NetDev] Name=sit-tun Kind=sit MTUBytes=1480 [Tunnel] Local=10.65.223.238 Remote=10.65.223.239 file: sit.network [Match] Name=em1 [Network] Tunnel=sit-tun [tomegun: rebased]
2014-05-19networkd-wait-online: wait for addresses to be configuredTom Gundersen
2014-05-19networkd/sd-network: extend operational statesTom Gundersen
Expose states 'degraded' or 'routable' if a link has a site/link-local or a routable address, respectively.
2014-05-19networkd/sd-network: expose statically configured NTP serversTom Gundersen
2014-05-19networkd: fixup static DNS serializationTom Gundersen
2014-05-19sd-dhcp-lease/sd-network: modernization and fix leakTom Gundersen
2014-05-19resolved: add daemon to manage resolv.confTom Gundersen
Also remove the equivalent functionality from networkd.
2014-05-19sd-network: expose DNS informationTom Gundersen
2014-05-19networkd: link - serialize DNS informationTom Gundersen
2014-05-19sd-dhcp-lease: move in_addr (de)serialization to shared network codeTom Gundersen
2014-05-17networkd: log - only log about udev initalization on debug levelTom Gundersen
2014-05-17networkd: keep list of active addressesTom Gundersen
2014-05-17networkd: IP address equalityTom Gundersen