| Age | Commit message (Collapse) | Author |
|---|
|
lldp fixes, second iteration
|
|
networkd: tunnel fix tunnel address
|
|
See: #2683
|
|
Instead of just notifying about the fact that something changed in the
database, actually inform the callback what precisely changed. This is useful,
so that the LLDP tx logic can be put into "fast" mode as soon as a previously
unknown peer appears, as suggested by the LLDP spec.
|
|
|
|
|
|
Let's add some minimalistic LLDP sender support. The idea is that this is
either on or off, and all fields determined automatically rather than
configured explicitly.
|
|
Let's not get confused should we be connected to some bridge that mirrors back
our packets.
|
|
These functions are nowadays used only within networkd-link.c, hence ther's no
point in littering our public namespace with them.
|
|
Being on the link-layer LLDP is nothing we should turn on only when there's a
link beat. Instead, turn it on, whenever the iface is UP regardless if there's
a link beat or not. This closes the race between a link beat being available
and us subscribing to LLDP as a result.
|
|
|
|
After all, if we know that an interface exists but networkd did not store any
info about it, then it's definitely unmanaged by it.
(Note that we add this fix-up to networkctl, and not to sd-network, simply
because a missing file might also be result of the interface not existing.)
|
|
Where we knowingly ignore possible error results, let's cast to void.
|
|
Instead of serializing the interface name, expose the interface index, since
that's the only stable identifier.
|
|
This way "networkctl status" becomes a bit more useful by default, as router
information is just visible, without any further configuration.
LLDP reception is fully passive and relatively low simple and low traffic,
hence this should be safe to enable by default.
|
|
This adds a small and useful field to the "systemctl status" output: the
router(s) the interface is connected to as reported via LLDP. Example output:
● 2: enp0s25
Link File: /usr/lib/systemd/network/99-default.link
Type: ether
State: degraded (configured)
Path: pci-0000:00:19.0
Driver: e1000e
Connected To: GS1900 on port 2 (foobar)
i.e. the last line is the relevant one.
|
|
|
|
Move decode_and_sort_links() into acquire_info_all() which is the only place
this is used. The result is then nicely symmetric to acquire_info_strv().
|
|
Let's always use the same calls to acquire interface data. Specifically port
"networkctl status" to use acquire_link_info_strv() and acquire_link_info_all()
like the other calls.
|
|
interface names
This way, the output may be reduced to only show data about the specified
interfaces.
|
|
and "lldp" verbs
|
|
VERB_DEFAULT may only appear once.
|
|
|
|
This reworks the sd-lldp substantially, simplifying things on one hand, and
extending the logic a bit on the other.
Specifically:
- Besides the sd_lldp object only one other object is maintained now,
sd_lldp_neighbor. It's used both as storage for literal LLDP packets, and for
maintainging info about peers in the database. Separation between packet, TLV
and chassis data is not maintained anymore. This should be a major
simplification.
- The sd-lldp API has been extended so that a couple of per-neighbor fields may
be queried directly, without iterating through the object. Other fields that
may appear multiple times, OTOH have to be iterated through.
- The maximum number of entries in the neighbor database is now configurable
during runtime.
- The generation of callbacks from sd_lldp objects is more restricted:
callbacks are only invoked when actual data changed.
- The TTL information is now hooked with a timer event, so that removals from
the neighbor database due to TTLs now result in a callback event.
- Querying LLDP neighbor database will now return a strictly ordered array, to
guarantee stability.
- A "capabilities" mask may now be configured, that selects what type of LLDP
neighbor data is collected. This may be used to restrict collection of LLDP
info about routers instead of all neighbors. This is now exposed via
networkd's LLDP= setting.
- sd-lldp's API to serialize the collected data to text files has been removed.
Instead, there's now an API to extract the raw binary data from LLDP neighbor
objects, as well as one to convert this raw binary data back to an LLDP
neighbor object. networkd will save this raw binary data to /run now, and the
client side can simply parse the information.
- support for parsing the more exotic TLVs has been removed, since we are not
using that. Instead there are now APIs to extract the raw data from TLVs.
Given how easy it is to parse the TLVs clients should do so now directly
instead of relying on our APIs for that.
- A lot of the APIs that parse out LLDP strings have been simplified so that
they actually return strings, instead of char arrays with a length. To deal
with possibly dangerous characters the strings are escaped if needed.
- APIs to extract and format the chassis and port IDs as strings has been
added.
- lldp.h has been simplified a lot. The enums are anonymous now, since they
were never used as enums, but simply as constants. Most definitions we don't
actually use ourselves have eben removed.
|
|
|
|
|
|
The iftype is an unsigned short, and not just an unsigned.
|
|
Usually, we place the #pragma once before the copyright blurb in header files,
but in a few cases we didn't. Move those around, so that we do the same thing
everywhere.
|
|
Let's just keep the few parts we actually need of it in the main sd_lldp
object, so that we can simplify things quite a bit.
While we are at it, remove ifname and mac fields which we make no use of
whatsoever.
|
|
this fixes 2655
|
|
|
|
|
|
This patch makes networkd stay around as long as there is more than just a
loopback interface around, or the loopback device isn't fully probed yet, or
the loopback device has a .network file attached.
In essence, this means networkd stays around now continously as it should,
unless it is running in some (container?) environment that really has no
interface except a loopback device.
Fixes #2577.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
networkd: Add support to configure VXLAN Port
|
|
The call combines outputing a string with prefixing it with a space, optionally. This is useful to shorten the logic
for outputing lists of strings, that are space separated.
|
|
This changes the UseDomains= setting of .network files to take an optional third value "route", in addition to the
boolean values. If set, the passed domain information is used for routing rules only, but not for the search path
logic.
|
|
configuration settings
All booleans called dhcp_xyz are now called ".dhcp_use_xyz", to match their respective configuration file settings. This
should clarify things a bit, in particular as there is a DHCP hostname that was previously called just ".hostname"
because ".dhcp_hostname" was already existing as a bool. Since this confusion is removed now because the bool is called
".dhcp_use_hostname", the string field is now renamed to ".dhcp_hostname".
|
|
When we collect the domain names of the various links and other sources in one ordered set, make sure to use proper DNS
name comparison to filter out duplicates.
|
|
For the search domain logic the order is highly relevant, hence make sure when collecting the various search domains to
add them to an ordered set, so that the order between search domains of a specific link is retained.
|
|
Previously, each invocation of dump_list() was prefixed with a call to strv_isempty() to suppress invocation of the
function when the list is empty anyway. Move the check into the function itself, so that we can reduce the code a bit
in size.
(Also, prefix a couple of invocations we knowingly ignore return errors with a (void) cast).
|
|
Previously, .network files only knew a vaguely defined "Domains=" concept, for which the documentation declared it was
the "DNS domain" for the network connection, without specifying what that means.
With this the Domains setting is reworked, so that there are now "routing" domains and "search" domains. The former are
to be used by resolved to route DNS request to specific network interfaces, the latter is to be used for searching
single-label hostnames with (in addition to being used for routing). Both settings are configured in the "Domains="
setting. Normal domain names listed in it are now considered search domains (for compatibility with existing setups),
while those prefixed with "~" are considered routing domains only. To route all lookups to a specific interface the
routing domain "." may be used, referring to the root domain. An alternative syntax for this is the "*", as was already
implemented before using the "wildcard" domain concept.
This commit adds proper parsers for this new logic, and exposes this via the sd-network API. This information is not
used by resolved yet, this will be added in a later commit.
|
|
Coverity inspired fixes
|
|
Null link or netdev are handled fine.
CID #1338084.
|
|
Improve libsystemd-networkd DHCP API (v3)
|
|
networkd: tunnel add support to configure address "any"
|
|
Fix IPv6PrivacyExtension (networkd-ndisc.c)
|
|
networkd: link - do not drop config for critical interfaces
|
|
libsystemd-network provides the public function
sd_dhcp_client_set_request_option() to enable the request of a given
DHCP option. However the enum defining such options is defined in the
internal header dhcp-protocol.h. Move the enum definition to the
public header sd-dhcp-client.h and properly namespace values.
|
|
At the moment sd_dhcp_lease_get_routes() returns an array of structs
which are not defined in public headers. Instead, change the function
to return an array of pointers to opaque sd_dhcp_route objects.
|
