| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
This patch makes networkd stay around as long as there is more than just a
loopback interface around, or the loopback device isn't fully probed yet, or
the loopback device has a .network file attached.
In essence, this means networkd stays around now continously as it should,
unless it is running in some (container?) environment that really has no
interface except a loopback device.
Fixes #2577.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
networkd: Add support to configure VXLAN Port
|
|
The call combines outputing a string with prefixing it with a space, optionally. This is useful to shorten the logic
for outputing lists of strings, that are space separated.
|
|
This changes the UseDomains= setting of .network files to take an optional third value "route", in addition to the
boolean values. If set, the passed domain information is used for routing rules only, but not for the search path
logic.
|
|
configuration settings
All booleans called dhcp_xyz are now called ".dhcp_use_xyz", to match their respective configuration file settings. This
should clarify things a bit, in particular as there is a DHCP hostname that was previously called just ".hostname"
because ".dhcp_hostname" was already existing as a bool. Since this confusion is removed now because the bool is called
".dhcp_use_hostname", the string field is now renamed to ".dhcp_hostname".
|
|
When we collect the domain names of the various links and other sources in one ordered set, make sure to use proper DNS
name comparison to filter out duplicates.
|
|
For the search domain logic the order is highly relevant, hence make sure when collecting the various search domains to
add them to an ordered set, so that the order between search domains of a specific link is retained.
|
|
Previously, each invocation of dump_list() was prefixed with a call to strv_isempty() to suppress invocation of the
function when the list is empty anyway. Move the check into the function itself, so that we can reduce the code a bit
in size.
(Also, prefix a couple of invocations we knowingly ignore return errors with a (void) cast).
|
|
Previously, .network files only knew a vaguely defined "Domains=" concept, for which the documentation declared it was
the "DNS domain" for the network connection, without specifying what that means.
With this the Domains setting is reworked, so that there are now "routing" domains and "search" domains. The former are
to be used by resolved to route DNS request to specific network interfaces, the latter is to be used for searching
single-label hostnames with (in addition to being used for routing). Both settings are configured in the "Domains="
setting. Normal domain names listed in it are now considered search domains (for compatibility with existing setups),
while those prefixed with "~" are considered routing domains only. To route all lookups to a specific interface the
routing domain "." may be used, referring to the root domain. An alternative syntax for this is the "*", as was already
implemented before using the "wildcard" domain concept.
This commit adds proper parsers for this new logic, and exposes this via the sd-network API. This information is not
used by resolved yet, this will be added in a later commit.
|
|
Coverity inspired fixes
|
|
Null link or netdev are handled fine.
CID #1338084.
|
|
Improve libsystemd-networkd DHCP API (v3)
|
|
networkd: tunnel add support to configure address "any"
|
|
Fix IPv6PrivacyExtension (networkd-ndisc.c)
|
|
networkd: link - do not drop config for critical interfaces
|
|
libsystemd-network provides the public function
sd_dhcp_client_set_request_option() to enable the request of a given
DHCP option. However the enum defining such options is defined in the
internal header dhcp-protocol.h. Move the enum definition to the
public header sd-dhcp-client.h and properly namespace values.
|
|
At the moment sd_dhcp_lease_get_routes() returns an array of structs
which are not defined in public headers. Instead, change the function
to return an array of pointers to opaque sd_dhcp_route objects.
|
|
|
|
strv_consume() is pretty expensive when invoked piecemeal, hence optimize it a bit by pre-allocating a properly sized
array.
|
|
This patch add support to configure port
PortRange:
VXLAN bases source UDP port based on flow to help the
receiver to be able to load balance based on outer header flow.
DestinatinPort:
Allow configuring the default destination port on a per-device basis.
|
|
This small addition fixes the issues #1982 and #2242.
IPv6PrivacyExtension now works as expected even when a RA is received.
|
|
It enhances tunnel(IPIP,GRE, SIT) to aconfigure address as
any.
Fixes #2279
|
|
Also add a coccinelle receipt to help with such transitions.
|
|
The new implementation will not allow passing the same values more than
once, so clean up first.
|
|
|
|
This adds a DNSSEC= setting to .network files, and makes resolved honour
them.
|
|
|
|
networkd previously knew an enum "ResolveSupport" for configuring
per-interface LLMNR support, resolved had a similar enum just called
"Support", with the same value and similar pasers.
Unify this, call the enum ResolveSupport, and port both daemons to it.
|
|
In a couple of cases we maintain configuration settings that know an on
and off state, like a boolean, plus some additional states. We generally
parse them as booleans first, and if that fails check for specific
additional values.
This adds a generalized set of macros for parsing such settings, and
ports one use in resolved and another in networkd over to it.
|
|
the idea is that interfaces marked as critical are typically used
for NFS root. networkd shouldn't drop that config.
discussion at #780
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
Commit 5e5b137a (networkd: link - drop foreign config when configuring
link) introduced a regression where addresses (including 127.0.0.1) are
removed from loopback device.
Do not handle loopback device when removing foreign configs.
Signed-off-by: Christian Hesse <mail@eworm.de>
|
|
This regressed during the port to extract_first_word in c598ac76
(v228).
CID #1338083
|
|
tree-wide: sort includes in *.h
|
|
This reverts commit 23f186494cf041107896fc4bd7fc5b8f921fd79f.
The bug has now been fixed, so we can go back to managing this ourselves.
|
|
This is a continuation of the previous include sort patch, which
only sorted for .c files.
|
|
|
|
Without this commit, we risk not picking up DNS addresses
as soon as they are available.
|
|
There is still a bug in the userspace version, so temporarily revert this.
This is a work-around for issue #1866.
|
|
networkd fixes
|
|
Don't block indefinitely, when control has been passed on from NDisc to DHCPv6.
In this case there is likely no IPv6 support on the local link, so otherwise
this would block indefinitely.
|
|
This ensures that several DHCPv6 clients can run on separate interfaces
simultaneously.
|
|
Fixes CID#1338680. Thanks to Thomas Andersen.
|
|
The ndisc client may trigger the dhcpv6 client to be started (this is the common case),
so we should allocate the dhcpv6 client whenever we allocate the ndisc one.
|
|
siphash24: let siphash24_finalize() and siphash24() return the result…
|
|
Rather than passing a pointer to return the result, return it directly
from the function calls.
Also, return the result in native endianess, and let the callers care
about the conversion. For hash tables and bloom filters, we don't care,
but in order to keep MAC addresses and DHCP client IDs stable, we
explicitly convert to LE.
|
|
Sort the includes accoding to the new coding style.
|
