| Age | Commit message (Collapse) | Author |
|---|
|
http://lists.freedesktop.org/archives/systemd-devel/2015-May/031598.html
|
|
This reverts commit 43c6d5abacaebf813845934ec8d5e5ee3c431854
(and a small part of 4046d8361c55c80ab8577aea52523b9e6eab0d0c)
It turns out we don't actually need to set the global ip_forward setting.
The only relevant setting is the one on each interface.
What the global toggle actually does is switch forwarding on/off for all
currently present interfaces and change the default for new ones.
That means that by setting the global ip_forward we
- Introduce a race condition, because if the interface with IPForward=yes
is brought up after one with IPForward=no, both will have forwarding
enabled, because the global switch turns it on for all interfaces.
If the other interface comes up first networkd correctly sets forward=0
and it doesn't get overridden.
- Change the forwarding setting for interfaces that networkd is not
configured to touch, even if the user disabled forwarding via sysctl,
either globally or per-interface
As forwarding works fine without this, as long as all relevant interfacest
individually set IPForward=yes: just drop it
This means that non-networkd interfaces use the global default while
networkd interfaces default to off if IPForward isn't given.
|
|
|
|
In containers we never have udev devices, so drop the assert.
This fixes an assertion introduced in af3aa302741b6edb0729925febb5f8bc26721fe3.
|
|
This changes log_unit_info() (and friends) to take a real Unit* object
insted of just a unit name as parameter. The call will now prefix all
logged messages with the unit name, thus allowing the unit name to be
dropped from the various passed romat strings, simplifying invocations
drastically, and unifying log output across messages. Also, UNIT= vs.
USER_UNIT= is now derived from the Manager object attached to the Unit
object, instead of getpid(). This has the benefit of correcting the
field for --test runs.
Also contains a couple of other logging improvements:
- Drops a couple of strerror() invocations in favour of using %m.
- Not only .mount units now warn if a symlinks exist for the mount
point already, .automount units do that too, now.
- A few invocations of log_struct() that didn't actually pass any
additional structured data have been replaced by simpler invocations
of log_unit_info() and friends.
- For structured data a new LOG_UNIT_MESSAGE() macro has been added,
that works like LOG_MESSAGE() but prefixes the message with the unit
name. Similar, there's now LOG_LINK_MESSAGE() and
LOG_NETDEV_MESSAGE().
- For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(),
LOG_NETDEV_INTERFACE() macros have been added that generate the
necessary per object fields. The old log_unit_struct() call has been
removed in favour of these new macros used in raw log_struct()
invocations. In addition to removing one more function call this
allows generated structured log messages that contain two object
fields, as necessary for example for network interfaces that are
joined into another network interface, and whose messages shall be
indexed by both.
- The LOG_ERRNO() macro has been removed, in favour of
log_struct_errno(). The latter has the benefit of ensuring that %m in
format strings is properly resolved to the specified error number.
- A number of logging messages have been converted to use
log_unit_info() instead of log_info()
- The client code in sysv-generator no longer #includes core code from
src/core/.
- log_unit_full_errno() has been removed, log_unit_full() instead takes
an errno now, too.
- log_unit_info(), log_link_info(), log_netdev_info() and friends, now
avoid double evaluation of their parameters
|
|
When setting IPv6 addresses acquired by DHCPv6, systemd-networkd sets
the IFA_F_NOPREFIXROUTE flag in the IFA_FLAGS netlink attribute. As
the flag and the attribute are present starting with Linux 3.14, older
kernels will need systemd-network to manage prefix route expiry.
By default, DHCPv6 addresses are first assigned setting the
IFA_F_NOPREFIXROUTE flag in the IFA_FLAGS netlink attribute. Should
the address assignment fail, the same assignment is tried without
the IFA_FLAGS attribute. Should also the second attempt fail, an error
is printed and address assignment ends with failure. As successful use
of the IFA_FLAGS netlink attribute is recorded in the Link structure,
the DHCPv6 code will know if the kernel or systemd-network fallback
code handles expiring prefixes.
The prefix expiration and IPv6 address updating fallback code is
resurrected from the parts deleted with commit
47d45d3cde45d6545367570264e4e3636bc9e345.
This patch can be removed once the minimum kernel requirements are
greater than or equal to 3.14.
|
|
This patch add support to create vti6 tunnel
test:
vt6.network
[Match]
Name=wlan0
[Network]
Tunnel=ip6vti
vti6.netdev
[NetDev]
Name=ip6vti
Kind=vti6
[Tunnel]
Local=2a00:ffde:4567:edde::4987
Remote=2001:473:fece:cafe::5179
ip link
11: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT
group default
link/tunnel6 :: brd ::
12: ip6vti@wlan0: <POINTOPOINT,NOARP> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default
link/tunnel6 2a00:ffde:4567:edde::4987 peer 2001:473:fece:cafe::5179
|
|
Replaces a lof ot strerror() usage with log_netdev_error_errno()
|
|
This should simplify the prototype a bit. The bus parameter is redundant
in most cases, and in the few where it matters it can be derived from
the message via sd_bus_message_get_bus().
|
|
|
|
This makes adds a couple of fixes:
- Introduces log_netdev_error_errno() and friends, which takes an error
number, and matches what log_link_error_errno() and friends do.
- Replaces a lof ot strerror() usage with log_netdev_error_errno(),
log_link_error_errno() and log_erro_errno()
- Uppercases the first character of many log messages, after all this is
supposed to be english language
- Drops manual negating of error codes before passing them to log
functions, the log functions all do that internally anyway.
Some other minor fixes.
Behaviour should not change really.
|
|
Rename bond confs and man as well.
[tomegun: dropped a stray comma]
|
|
We should always name the object first, the level second, like
everywhere else in the sources.
|
|
This patch adds configurational support for bond option.
Test conf:
bond.netdev
---
[NetDev]
Name=bond1
Kind=bond
[Bond]
ArpAllTargets=all
PrimaryReselect=better
ArpIntervalSec=10s
ArpIpTargets= 192.168.8.102 192.168.8.101 192.168.8.102
---
$cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (round-robin)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
ARP Polling Interval (ms): 10000
ARP IP target/s (n.n.n.n form): 192.168.8.100, 192.168.8.101, 192.168.8.102
|
|
Add UDPCheckSum option to enable transmitting UDP checksums when doing
VXLAN/IPv4. Add UDP6ZeroChecksumRx, and UDP6ZeroChecksumTx
options to enable sending zero checksums and receiving zero
checksums in VXLAN/IPv6
[tomegun: rebase manpage due to whitespace changes]
|
|
|
|
|
|
|
|
|
|
|
|
like:
src/shared/install.c: In function ‘unit_file_lookup_state’:
src/shared/install.c:1861:16: warning: ‘r’ may be used uninitialized in
this function [-Wmaybe-uninitialized]
return r < 0 ? r : state;
^
src/shared/install.c:1796:13: note: ‘r’ was declared here
int r;
^
|
|
Expiring prefixes need not be handled anymore as the kernel has been
instructed not to create routes for DHCPv6 assigned addresses via the
IFA_F_NOPREFIXROUTE flag.
|
|
The IFA_F_NOPREFIXROUTE flag prevents the kernel from creating new onlink
prefixes when a DHCPv6 IPv6 address with a prefix length is set from user
space. IPv6 routing will follow the onlink status from Router Advertisment
Prefix Information options or any manually set route, which is the correct
thing to do.
As this flag has a larger value than what fits into an unsigned char, update
the flag attribute to an uint32_t and set it with an IFA_FLAGS attribute
when writing netlink messages to the kernel.
|
|
|
|
Despite having the internal logic in place to enable/disable using NTP
servers provided by DHCP the network config didn't expose the option.
|
|
We were using a space more often than not, and this way is
codified in CODING_STYLE.
|
|
The input data would have to be borked, so this is unlikely to happen,
but since we have a nice helper function to do it properly... why not?
CID #1261390.
|
|
|
|
The crucial point here is that we will not change the settings of a netdev created by someone else
we simply use it as is and trust it was set up as intended.
This is confusing in the case of the pre-created netdev's (bond0 etc.), the solution should probably
be to simply make the kernel stop creating these devices as they are pretty useless.
|
|
Introduce BindCarrier= to indicate the set of links that determine if
the current link should be brought UP or DOWN.
[tomegun: add a bit to commit message]
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
Too generic name.
|
|
Makes it a bit less ambiguous.
|
|
The kernel does not like getting an empty container, so just always pass the parameter, even if
it is the default.
|
|
|
|
connection
Just fall back to plain old event loop in this (highly unlikely) case.
In the glorious future when kdbus is upstream we can of course drop all this.
|
|
On Tue, Feb 10, 2015 at 08:10:43PM +0100, Lennart Poettering wrote:
> Hmm, I think it would be nicer to use be32toh() here instead, since it
> ensures the macro is (to a limited degree) typesafe.
>
> Any chance you could rework that?
From: Paul Martin <paul.martin@codethink.co.uk>
Date: Wed, 11 Feb 2015 11:47:16 +0000
Subject: [PATCH] networkd dhcpv4 logging endian fix
On a big-endian host, systemd-networkd prints out IPv4 network
addresses byte reversed:
Feb 10 16:43:32 hostname systemd-networkd[151]: eth0 : DHCPv4 address 158.1.24.10/16 via 1.1.24.10
The address obtained is 10.24.1.158/16 and the route is
10.24.0.0/16 dev eth0 src 10.24.1.187
The macro ADDRESS_FMT_VAL() unpacks a "struct in_addr" in a
little-endian specific manner.
This patch forces the passed address into host order, then unpacks it.
On an x86 later than i486, compiled with -O2, the only extra overhead
is a single bswap instruction.
|
|
Match{Name,OrginalName,Type,Driver,Path} can now take a space-separated glob of matches.
|
|
Pass around Link objcets rather than FdbEntry objects. The link objects have an up-to-date
ifname we can use for logging. match_name sholud _never_ be used for anything except
matching. Firstly, it may be unset (usually is), and secondly it may not be up-to-date.
|
|
|
|
|
|
Reported by Zbigniew.
|
|
For now we only support the hardcoded values RT_SCOPE_{UNIVERSE,LOCAL,HOST},
and not numerical values or values from /etc/iproute2/rt_scopes.
This addresses https://bugs.freedesktop.org/show_bug.cgi?id=88508.
|
|
|
|
|
|
This allows the admin to set the host-specific part of IPv6 addresses, but still
receive the prefix via SLAAC.
.network file snippet:
[Network]
IPv6Token=::12
gives:
$ ip token
token ::12 dev eth0
This closes https://bugs.freedesktop.org/show_bug.cgi?id=81177.
|
|
This allows both IPv4 and IPv6 link-local addresses to be enabled or disabled. By default
we still enable IPv6LL and disable IPv4LL. The old config option is kept for backwards
compatibility, but removed from the documentation.
|
|
|
|
|
|
Object path components must start with [A-Za-z_] (AFAIK).
Also the value of 'p' is undefined if asprintf fails.
Compare to user_bus_path() in src/login/logind-user-dbus.c:281.
|
