| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This the patch implements a notificaiton mechanism from the init process
in the container to systemd-nspawn.
The switch --notify-ready=yes configures systemd-nspawn to wait the "READY=1"
message from the init process in the container to send its own to systemd.
--notify-ready=no is equivalent to the previous behavior before this patch,
systemd-nspawn notifies systemd with a "READY=1" message when the container is
created. This notificaiton mechanism uses socket file with path relative to the contanier
"/run/systemd/nspawn/notify". The default values it --notify-ready=no.
It is also possible to configure this mechanism from the .nspawn files using
NotifyReady. This parameter takes the same options of the command line switch.
Before this patch, systemd-nspawn notifies "ready" after the inner child was created,
regardless the status of the service running inside it. Now, with --notify-ready=yes,
systemd-nspawn notifies when the service is ready. This is really useful when
there are dependencies between different contaniers.
Fixes https://github.com/systemd/systemd/issues/1369
Based on the work from https://github.com/systemd/systemd/pull/3022
Testing:
Boot a OS inside a container with systemd-nspawn.
Note: modify the commands accordingly with your filesystem.
1. Create a filesystem where you can boot an OS.
2. sudo systemd-nspawn -D ${HOME}/distros/fedora-23/ sh
2.1. Create the unit file /etc/systemd/system/sleep.service inside the container
(You can use the example below)
2.2. systemdctl enable sleep
2.3 exit
3. sudo systemd-run --service-type=notify --unit=notify-test
${HOME}/systemd/systemd-nspawn --notify-ready=yes
-D ${HOME}/distros/fedora-23/ -b
4. In a different shell run "systemctl status notify-test"
When using --notify-ready=yes the service status is "activating" for 20 seconds
before being set to "active (running)". Instead, using --notify-ready=no
the service status is marked "active (running)" quickly, without waiting for
the 20 seconds.
This patch was also test with --private-users=yes, you can test it just adding it
at the end of the command at point 3.
------ sleep.service ------
[Unit]
Description=sleep
After=network.target
[Service]
Type=oneshot
ExecStart=/bin/sleep 20
[Install]
WantedBy=multi-user.target
------------ end ------------
|
|
The current raw_clone function takes two arguments, the cloning flags and
a pointer to the stack for the cloned child. The raw cloning without
passing a "thread main" function does not make sense if a new stack is
specified, as it returns in both the parent and the child, which will fail
in the child as the stack is virgin. All uses of raw_clone indeed pass NULL
for the stack pointer which indicates that both processes should share the
stack address (so you better don't pass CLONE_VM).
This commit refactors the code to not require the caller to pass the stack
address, as NULL is the only sensible option. It also adds the magic code
needed to make raw_clone work on sparc64, which does not return 0 in %o0
for the child, but indicates the child process by setting %o1 to non-zero.
This refactoring is not plain aesthetic, because non-NULL stack addresses
need to get mangled before being passed to the clone syscall (you have to
apply STACK_BIAS), whereas NULL must not be mangled. Implementing the
conditional mangling of the stack address would needlessly complicate the
code.
raw_clone is moved to a separete header, because the burden of including
the assert machinery and sched.h shouldn't be applied to every user of
missing_syscalls.h
|
|
The argument is about capabilities.
|
|
Split seccomp into nspawn-seccomp.[ch]. Currently there are no changes,
but this will make it easy in the future to share or use the seccomp logic
from systemd core.
|
|
|
|
|
|
Let's make sure we don't remove veth links that existed before nspawn was
invoked.
https://github.com/systemd/systemd/pull/3209#discussion_r62439999
|
|
This adds a new concept of network "zones", which are little more than bridge
devices that are automatically managed by nspawn: when the first container
referencing a bridge is started, the bridge device is created, when the last
container referencing it is removed the bridge device is removed again. Besides
this logic --network-zone= is pretty much identical to --network-bridge=.
The usecase for this is to make it easy to run multiple related containers
(think MySQL in one and Apache in another) in a common, named virtual Ethernet
broadcast zone, that only exists as long as one of them is running, and fully
automatically managed otherwise.
|
|
Make use of this in nspawn at a couple of places. A later commit should port
more code over to this, including networkd.
|
|
|
|
This reverts commit d2773e59de3dd970d861e9f996bc48de20ef4314.
Merge got squashed by mistake.
|
|
Fixes:
cp /etc/machine-id /var/tmp/systemd-test.HccKPa/nspawn-root/etc
systemd-nspawn -D /var/tmp/systemd-test.HccKPa/nspawn-root --link-journal host -b
...
Host and machine ids are equal (P�S!V): refusing to link journals
|
|
Fixes:
$ systemd-nspawn -h
...
Failed to remove veth interface ����: Operation not permitted
This is a follow-up for d2773e59de3dd970d861
|
|
nspawn automatic user namespaces
|
|
* sd-netlink: permit RTM_DELLINK messages with no ifindex
This is useful for removing network interfaces by name.
* nspawn: explicitly remove veth links we created after use
Sometimes the kernel keeps veth links pinned after the namespace they have been
joined to died. Let's hence explicitly remove veth links after use.
Fixes: #2173
|
|
Sometimes the kernel keeps veth links pinned after the namespace they have been
joined to died. Let's hence explicitly remove veth links after use.
Fixes: #2173
|
|
With this change -U will turn on user namespacing only if the kernel actually
supports it and otherwise gracefully degrade to non-userns mode.
|
|
In order to implement this we change the bool arg_userns into an enum
UserNamespaceMode, which can take one of NO, PICK or FIXED, and replace the
arg_uid_range_pick bool with it.
|
|
Given that user namespacing is pretty useful now, let's add a shortcut command
line switch for the logic.
|
|
This adds the new value "pick" to --private-users=. When specified a new
UID/GID range of 65536 users is automatically and randomly allocated from the
host range 0x00080000-0xDFFF0000 and used for the container. The setting
implies --private-users-chown, so that container directory is recursively
chown()ed to the newly allocated UID/GID range, if that's necessary. As an
optimization before picking a randomized UID/GID the UID of the container's
root directory is used as starting point and used if currently not used
otherwise.
To protect against using the same UID/GID range multiple times a few mechanisms
are in place:
- The first and the last UID and GID of the range are checked with getpwuid()
and getgrgid(). If an entry already exists a different range is picked. Note
that by "last" UID the user 65534 is used, as 65535 is the 16bit (uid_t) -1.
- A lock file for the range is taken in /run/systemd/nspawn-uid/. Since the
ranges are taken in a non-overlapping fashion, and always start on 64K
boundaries this allows us to maintain a single lock file for each range that
can be randomly picked. This protects nspawn from picking the same range in
two parallel instances.
- If possible the /etc/passwd lock file is taken while a new range is selected
until the container is up. This means adduser/addgroup should safely avoid
the range as long as nss-mymachines is used, since the allocated range will
then show up in the user database.
The UID/GID range nspawn picks from is compiled in and not configurable at the
moment. That should probably stay that way, since we already provide ways how
users can pick their own ranges manually if they don't like the automatic
logic.
The new --private-users=pick logic makes user namespacing pretty useful now, as
it relieves the user from managing UID/GID ranges.
|
|
This adds a new --private-userns-chown switch that may be used in combination
with --private-userns. If it is passed a recursive chmod() operation is run on
the OS tree, fixing all file owner UID/GIDs to the right ranges. This should
make user namespacing pretty workable, as the OS trees don't need to be
prepared manually anymore.
|
|
|
|
|
|
v2:
- "=" is required, so remove the <optional> tags that v1 added
|
|
nspawn: always setup machine id (v3)
|
|
We check /etc/machine-id of the container and if it is already populated
we use value from there, possibly ignoring value of --uuid option from
the command line. When dealing with R/O image we setup transient machine
id.
Once we determined machine id of the container, we use this value for
registration with systemd-machined and we also export it via
container_uuid environment variable.
As registration with systemd-machined is done by the main nspawn process
we communicate container machine id established by setup_machine_id from
outer child to the main process by unix domain socket. Similarly to PID
of inner child.
|
|
CID #1322380.
|
|
We get
$ systemd-nspawn --image /dev/loop1 --port 8080:80 -n -b 3
--port= is not supported, compiled without libiptc support.
instead of a ping-nc-iptables debugging session
|
|
If the user specifies an selinux_apifs_context all content created in
the container including /dev/console should use this label.
Currently when this uses the default label it gets labeled user_devpts_t,
which would require us to write a policy allowing container processes to
manage user_devpts_t. This means that an escaped process would be allowed
to attack all users terminals as well as other container terminals. Changing
the label to match the apifs_context, means the processes would only be allowed
to manage their specific tty.
This change fixes a problem preventing RKT containers from working with systemd-nspawn.
|
|
|
|
Throughout the tree there's spurious use of spaces separating ++ and --
operators from their respective operands. Make ++ and -- operator
consistent with the majority of existing uses; discard the spaces.
|
|
Better support of OPENPGPKEY, CAA, TLSA packets and tests
|
|
ISO/IEC 9899:1999 §7.21.1/2 says:
Where an argument declared as size_t n specifies the length of the array
for a function, n can have the value zero on a call to that
function. Unless explicitly stated otherwise in the description of a
particular function in this subclause, pointer arguments on such a call
shall still have valid values, as described in 7.1.4.
In base64_append_width memcpy was called as memcpy(x, NULL, 0). GCC 4.9
started making use of this and assumes This worked fine under -O0, but
does something strange under -O3.
This patch fixes a bug in base64_append_width(), fixes a possible bug in
journal_file_append_entry_internal(), and makes use of the new function
to simplify the code in other places.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
|
|
This adds a new switch --as-pid2, which allows running commands as PID 2, while a stub init process is run as PID 1.
This is useful in order to run arbitrary commands in a container, as PID1's semantics are different from all other
processes regarding reaping of unknown children or signal handling.
|
|
Fixes: #2192
|
|
Fixes #2186
This fixes fall-out from 574edc90066c3faeadcf4666928ed9b0ac409c75.
|
|
Fixes #2091
|
|
|
|
Change the capability bounding set parser and logic so that the bounding
set is kept as a positive set internally. This means that the set
reflects those capabilities that we want to keep instead of drop.
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
|
|
The new switch operates like --network-veth, but may be specified
multiple times (to define multiple link pairs) and allows flexible
definition of the interface names.
This is an independent reimplementation of #1678, but defines different
semantics, keeping the behaviour completely independent of
--network-veth. It also comes will full hook-up for .nspawn files, and
the matching documentation.
|
|
[v2] treewide: treatment of errno and other cleanups
|
|
with small manual cleanups for style.
|
|
doc: typo and ortho fixes
|
|
We were hardcoding "systemd-nspawn" as the value of the $container env
variable and "nspawn" as the service string in machined registration.
This commit allows the user to configure it by setting the
$SYSTEMD_NSPAWN_CONTAINER_SERVICE env variable when calling
systemd-nspawn.
If $SYSTEMD_NSPAWN_CONTAINER_SERVICE is not set, we use the string
"systemd-nspawn" for both, fixing the previous inconsistency.
|
|
|
