| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Previously, we'd allocate the TTY, spawn a service on it, but
immediately start processing the TTY and forwarding it to whatever the
commnd was started on. This is however problematic, as the TTY might get
actually opened only much later by the service. We'll hence first get
EIOs on the master as the other side is still closed, and hence
considered it hung up and terminated the session.
With this change we add a flag to the pty forwarding logic:
PTY_FORWARD_IGNORE_INITIAL_VHANGUP. If set, we'll ignore all hangups
(i.e. EIOs) on the master PTY until the first byte is successfully read.
From that point on we consider a hangup/EIO a regular connection termination. This
way, we handle the race: when we get EIO initially we'll ignore it,
until the connection is properly set up, at which time we start
honouring it.
|
|
- Rely everywhere that we use abs() on the error code passed in anyway,
thus don't need to explicitly negate what we pass in
- Never attach synthetic error number information to log messages. Only
log about errors we *receive* with the error number we got there,
don't log any synthetic error, that don#t even propagate, but just eat
up.
- Be more careful with attaching exactly the error we get, instead of
errno or unrelated errors randomly.
- Fix one occasion where the error number and line number got swapped.
- Make sure we never tape over OOM issues, or inability to resolve
specifiers
|
|
sysfs below it
This way we can hide things like /sys/firmware or /sys/hypervisor from
the container, while keeping the device tree around.
While this is a security benefit in itself it also allows us to fix
issue #1277.
Previously we'd mount /sys before creating the user namespace, in order
to be able to mount /sys/fs/cgroup/* beneath it (which resides in it),
which we can only mount outside of the user namespace. To ensure that
the user namespace owns the network namespace we'd set up the network
namespace at the same time as the user namespace. Thus, we'd still see
the /sys/class/net/ from the originating network namespace, even though
we are in our own network namespace now. With this patch, /sys is
mounted before transitioning into the user namespace as tmpfs, so that
we can also mount /sys/fs/cgroup/* into it this early. The directories
such as /sys/class/ are then later added in from the real sysfs from
inside the network and user namespace so that they actually show whatis
available in it.
Fixes #1277
|
|
We didn#t actually pass ownership of /run to the UID in the container
since some releases, let's fix that.
|
|
|
|
directories
|
|
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
|
|
This is highly complex code after all, we really should make sure to
only keep one implementation of this extremely difficult function
around.
|
|
|
|
Also, make it slightly more powerful, by accepting a flags argument, and
make it safe for handling if more than one cmsg attribute happens to be
attached.
|
|
A bunch of "Client -> Child" fixes and one barrier-enumerator fix.
(David: rebased on master)
|
|
(David: Note, this is just a cleanup and doesn't fix any bugs)
|
|
Introduce two new helpers that send/receive a single fd via a unix
transport. Also make nspawn use them instead of hard-coding it.
Based on a patch by Krzesimir Nowak.
|
|
off_t is a really weird type as it is usually 64bit these days (at least
in sane programs), but could theoretically be 32bit. We don't support
off_t as 32bit builds though, but still constantly deal with safely
converting from off_t to other types and back for no point.
Hence, never use the type anymore. Always use uint64_t instead. This has
various benefits, including that we can expose these values directly as
D-Bus properties, and also that the values parse the same in all cases.
|
|
|
|
We should really close all parent sides of our child/parent socket
pairs.
|
|
|
|
SOCK_DGRAM and SOCK_SEQPACKET have very similar semantics when used with
socketpair(). However, SOCK_SEQPACKET has the advantage of knowing a
hangup concept, since it is inherently connection-oriented.
Since we use socket pairs to communicate between the nspawn main process
and the nspawn child process, where the child might die abnormally it's
interesting to us to learn about this via hangups if the child side of
the pair is closed. Hence, let's switch to SOCK_SEQPACKET for these
internal communication sockets.
Fixes #956.
|
|
|
|
Let's remove unnecessary inclusions, and order the list alphabetically
as suggested in CODING_STYLE now.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.nspawn fiels are simple settings files that may accompany container
images and directories and contain settings otherwise passed on the
nspawn command line. This provides an efficient way to attach execution
data directly to containers.
|
|
In the unified hierarchy delegating controller access is safe, hence
make sure to enable all controllers for the "payload" subcgroup if we
create it, so that the container will have all controllers enabled the
nspawn service itself has.
|
|
This patch set adds full support the new unified cgroup hierarchy logic
of modern kernels.
A new kernel command line option "systemd.unified_cgroup_hierarchy=1" is
added. If specified the unified hierarchy is mounted to /sys/fs/cgroup
instead of a tmpfs. No further hierarchies are mounted. The kernel
command line option defaults to off. We can turn it on by default as
soon as the kernel's APIs regarding this are stabilized (but even then
downstream distros might want to turn this off, as this will break any
tools that access cgroupfs directly).
It is possibly to choose for each boot individually whether the unified
or the legacy hierarchy is used. nspawn will by default provide the
legacy hierarchy to containers if the host is using it, and the unified
otherwise. However it is possible to run containers with the unified
hierarchy on a legacy host and vice versa, by setting the
$UNIFIED_CGROUP_HIERARCHY environment variable for nspawn to 1 or 0,
respectively.
The unified hierarchy provides reliable cgroup empty notifications for
the first time, via inotify. To make use of this we maintain one
manager-wide inotify fd, and each cgroup to it.
This patch also removes cg_delete() which is unused now.
On kernel 4.2 only the "memory" controller is compatible with the
unified hierarchy, hence that's the only controller systemd exposes when
booted in unified heirarchy mode.
This introduces a new enum for enumerating supported controllers, plus a
related enum for the mask bits mapping to it. The core is changed to
make use of this everywhere.
This moves PID 1 into a new "init.scope" implicit scope unit in the root
slice. This is necessary since on the unified hierarchy cgroups may
either contain subgroups or processes but not both. PID 1 hence has to
move out of the root cgroup (strictly speaking the root cgroup is the
only one where processes and subgroups are still allowed, but in order
to support containers nicey, we move PID 1 into the new scope in all
cases.) This new unit is also used on legacy hierarchy setups. It's
actually pretty useful on all systems, as it can then be used to filter
journal messages coming from PID 1, and so on.
The root slice ("-.slice") is now implicitly created and started (and
does not require a unit file on disk anymore), since
that's where "init.scope" is located and the slice needs to be started
before the scope can.
To check whether we are in unified or legacy hierarchy mode we use
statfs() on /sys/fs/cgroup. If the .f_type field reports tmpfs we are in
legacy mode, if it reports cgroupfs we are in unified mode.
This patch set carefuly makes sure that cgls and cgtop continue to work
as desired.
When invoking nspawn as a service it will implicitly create two
subcgroups in the cgroup it is using, one to move the nspawn process
into, the other to move the actual container processes into. This is
done because of the requirement that cgroups may either contain
processes or other subgroups.
|
|
that either
Follow-up regarding #649.
|
|
--bind and --bind-ro perform the bind mount
non-recursively. It is sometimes (often?) desirable
to do a recursive mount. This patch adds an optional
set of bind mount options in the form of:
--bind=src-path:dst-path:options
options are comma separated and currently only
"rbind" and "norbind" are allowed.
Default value is "rbind".
|
|
Fixes #1018.
Based on a patch from Seth Jennings.
|
|
|
|
: characters can be entered with the \: escape sequence.
|
|
Overlayfs uses , as an option separator and : as a list separator. These
characters are both valid in file paths, so overlayfs allows file paths
which contain these characters to backslash escape these values.
|
|
: characters in bind paths can be entered as the \: escape sequence.
|
|
This now accepts : characters with the \: escape sequence.
Other escape sequences are also interpreted, but having a \ in your file
path is less likely than :, so this shouldn't break anyone's existing
tools.
|
|
Manual merge of https://github.com/systemd/systemd/pull/751.
|
|
All users are now setting lowercase=false.
|
|
Pretty trivial helper which wraps free() but returns NULL, so we can
simplify this:
free(foobar);
foobar = NULL;
to this:
foobar = mfree(foobar);
|
|
Use free_and_strdup() where appropriate and replace equivalent,
open-coded versions.
|
|
Mounting devpts with a uid breaks pty allocation with recent glibc
versions, which expect that the kernel will set the correct owner for
user-allocated ptys.
The kernel seems to be smart enough to use the correct uid for root when
we switch to a user namespace.
This resolves #337.
|
|
fileio: consolidate write_string_file*()
|
|
|
|
The latest consolidation cleanup of write_string_file() revealed some users
of that helper which should have used write_string_file_no_create() in the
past but didn't. Basically, all existing users that write to files in /sys
and /proc should not expect to write to a file which is not yet existant.
|
|
Merge write_string_file(), write_string_file_no_create() and
write_string_file_atomic() into write_string_file() and provide a flags mask
that allows combinations of atomic writing, newline appending and automatic
file creation. Change all users accordingly.
|
|
richardmaw-codethink/nspawn-automatic-uid-shift-fix-v2
nspawn: Communicate determined UID shift to parent version 2
|
|
There is logic to determine the UID shift from the file-system, rather
than having it be explicitly passed in.
However, this needs to happen in the child process that sets up the
mounts, as what's important is the UID of the mounted root, rather than
the mount-point.
Setting up the UID map needs to happen in the parent becuase the inner
child needs to have been started, and the outer child is no longer able
to access the uid_map file, since it lost access to it when setting up
the mounts for the inner child.
So we need to communicate the uid shift back out, along with the PID of
the inner child process.
Failing to communicate this means that the invalid UID shift, which is
the value used to specify "this needs to be determined from the file
system" is left invalid, so setting up the user namespace's UID shift
fails.
|
