| Age | Commit message (Collapse) | Author |
|---|
|
|
|
In trying to track down a stupid linker bug, I noticed a bunch of
memset() calls that should be using memzero() to make it more "obvious"
that the options are correct (i.e. 0 is not the length, but the data to
set). So fix up all current calls to memset(foo, 0, length) to
memzero(foo, length).
|
|
Fixes minor leak in error path in device.c.
|
|
This extends 62678ded 'efi: never call qsort on potentially
NULL arrays' to all other places where qsort is used and it
is not obvious that the count is non-zero.
|
|
|
|
btrfs.h was added to uapi in Linux 3.9. To fix building with older
header versions this adds a configure check for the header and re-adds
btrfs definitions to missing.h which was removed in bed2e820 along with
two other ioctls used by gpt-auto-generator.
[ Apparently, btrfs.h was only added recently:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=55e301fd57a6239ec14b91a1cf2e70b3dd135194
let's re-add it for now -- kay ]
|
|
|
|
Freeing in error path is the common pattern with set_put().
|
|
This reverts commit 4826f0b7b5c0aefa08b8cc7ef64d69027f84da2c.
Because statfs.t_type can be int on some architecures, we have to cast
the const magic to the type, otherwise the compiler warns about
signed/unsigned comparison, because the magic can be 32 bit unsigned.
statfs(2) man page is also wrong on some systems, because
f_type is not __SWORD_TYPE on some architecures.
The following program:
int main(int argc, char**argv)
{
struct statfs s;
statfs(argv[1], &s);
printf("sizeof(f_type) = %d\n", sizeof(s.f_type));
printf("sizeof(__SWORD_TYPE) = %d\n", sizeof(__SWORD_TYPE));
printf("sizeof(long) = %d\n", sizeof(long));
printf("sizeof(int) = %d\n", sizeof(int));
if (sizeof(s.f_type) == sizeof(int)) {
printf("f_type = 0x%x\n", s.f_type);
} else {
printf("f_type = 0x%lx\n", s.f_type);
}
return 0;
}
executed on s390x gives for a btrfs:
sizeof(f_type) = 4
sizeof(__SWORD_TYPE) = 8
sizeof(long) = 8
sizeof(int) = 4
f_type = 0x9123683e
|
|
This reverts commit a858b64dddf79177e12ed30f5e8c47a1471c8bfe.
This reverts commit aea275c43194b6ac519ef907b62c5c995050fde0.
This reverts commit fc6e6d245ee3989c222a2a8cc82a33475f9922f3.
This reverts commit c4073a27c555aeceac87a3b02a83141cde641a1e.
This reverts commit cddf148028f525be8176e7f1cbbf4f862bd287f6.
This reverts commit 8c68a70170b31f93c287f29fd06c6c17edaf19ad.
The constants are now casted to __SWORD_TYPE, which should resolve the
compiler warnings about signed vs unsigned.
After talking to Kay, we concluded:
This should be fixed in the kernel, not worked around in userspace tools.
Architectures cannot use int and expect magic constants lager than INT_MAX
to work correctly. The kernel header needs to be fixed.
Even coreutils cannot handle it:
#define RAMFS_MAGIC 0x858458f6
# stat -f -c%t /
ffffffff858458f6
#define BTRFS_SUPER_MAGIC 0x9123683E
# stat -f -c%t /mnt
ffffffff9123683e
Although I found the perfect working macro to fix the thing :)
__extension__ ({ \
bool _ret = false; \
switch(f) { case c: _ret=true; }; \
( _ret ); \
})
|
|
|
|
On some architectures (like s390x) the kernel has the type int for
f_type, but long in userspace.
Assigning the 32 bit magic constants from linux/magic.h to the 31 bit
signed f_type in the kernel, causes f_type to be negative for some
constants.
glibc extends the int to long for those architecures in 64 bit mode, so
the negative int becomes a negative long, which cannot be simply
compared to the original magic constant, because the compiler would
automatically cast the constant to long.
To workaround this issue, we also compare to the (int)MAGIC value in a
macro. Of course, we could do #ifdef with the architecure, but it has to
be maintained, and the magic constants are 32 bit anyway.
Someday, when the int is unsigned or long for all architectures, we can
remove this macro again. Until then, keep it as simple as it can be.
|
|
Instead of making a type up, just use __SWORD_TYPE, after reading
statfs(2).
Too bad, this does not fix s390x because __SWORD_TYPE is (long int) and
the kernel uses (int) to fill in the field!!!!!!
|
|
|
|
statfs.f_type is signed but the filesystem magics are unsigned.
Casting the magics to signed will not make the signed.
Problem seen on big-endian 64bit s390x with __fsword_t 8 bytes.
Casting statfs.f_type to unsigned on the other hand will get us what we
need.
https://bugzilla.redhat.com/show_bug.cgi?id=953217
|
|
Before, we would initialize many fields twice: first
by filling the structure with zeros, and then a second
time with the real values. We can let the compiler do
the job for us, avoiding one copy.
A downside of this patch is that text gets slightly
bigger. This is because all zero() calls are effectively
inlined:
$ size build/.libs/systemd
text data bss dec hex filename
before 897737 107300 2560 1007597 f5fed build/.libs/systemd
after 897873 107300 2560 1007733 f6075 build/.libs/systemd
… actually less than 1‰.
A few asserts that the parameter is not null had to be removed. I
don't think this changes much, because first, it is quite unlikely
for the assert to fail, and second, an immediate SEGV is almost as
good as an assert.
|
|
The ~80 chars per line part wasn't well received.
|
|
Use _cleanup_ and wrap lines to ~80 chars and such.
|
|
- check for OOM
- no need to use floats and round()
|
|
Readahead has all sorts of bad side effects depending on your
storage media. On rotating disks, it may be degrading startup
performance if enough requests are queued spanning linearly
over all blocks early at boot, and mount, blkid and friends
want to insert reads to the start of these block devices after.
The end result is that on spinning disks with ext3/4 that udev
and mounts take a very long time, and nothing really happens until
readahead is completely finished.
This has the net effect that the CPU is almost entirely idle
for the entire period that readahead is working. We could have
finished starting up quite a lot of services in this time if
we were smarter at how we do readahead.
This patch sorts all requests into 2 second "chunks" and sub-sorts
each chunk by block. This adds a single cross-drive seek per "chunk"
but has the benefit that we will have a lot of the blocks we need
early on in the boot sequence loaded into memory faster.
For a comparison of how before/after bootcharts look (ext4 on a
mobile 5400rpm 250GB drive) please look at:
http://foo-projects.org/~sofar/blocked-tests/
There are bootcharts in the "before" and "after" folders where you
should be able to see that many low-level services finish 5-7
seconds earlier with the patch applied (after).
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=868603
|
|
|
|
also a number of minor fixups and bug fixes: spelling, oom errors
that didn't print errors, not properly forwarding error codes,
few more consistency issues, et cetera
|
|
glibc/glib both use "out of memory" consistantly so maybe we should
consider that instead of this.
Eliminates one string out of a number of binaries. Also fixes extra newline
in udev/scsi_id
|
|
since the binaries share much of the same code and we better load only
one binary instead of two from disk at early boot let's merge the three
readahead binaries into one. This also allows us to drop a lot of
duplicated code.
|
|
This patch adds code to compile 'systemd-readahead-analyze' and install
it into $bindir.
Use this program to parse the contents of the readahead pack file, or
an arbitrary pack file and display which files are listed in it, and
how much of the files are requested to be readahead.
This code is not new - it's partially taken from sreadahead (formerly
maintained by Arjan van der Ven and me, and was originally written
by me), and adapted with the right bits to parse the systemd
readahead pack files, which are slightly different in format.
v2 adds a common READAHEAD_PACK_FILE_VERSION used in all the code
to provide a quick way to assure all these programs are always
synchronized. v3 fixes the integer math.
|
|
|
|
If the inode nr for each file is available in the pack file we can
easily detect replaced files (like they result from package upgrades)
which we can then skip to readahead.
|
|
|
|
While collecting readahead data we want to know exactly what userspace
accesses unblurred by the kernel's read_ahead_kb. Hence lower this
during collection, and raise it afterwards.
This is mostly based on ideas and code by Auke Kok.
|
|
ConditionVirtualization= in the unit
|
|
We finally got the OK from all contributors with non-trivial commits to
relicense systemd from GPL2+ to LGPL2.1+.
Some udev bits continue to be GPL2+ for now, but we are looking into
relicensing them too, to allow free copy/paste of all code within
systemd.
The bits that used to be MIT continue to be MIT.
The big benefit of the relicensing is that closed source code may now
link against libsystemd-login.so and friends.
|
|
|
|
|
|
|
