| Age | Commit message (Collapse) | Author |
|---|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
It's not used anywhere else.
|
|
Also, don't consider RRs that aren't primary to the lookups we do as relevant to the lookups.
|
|
This should clarify that this is not regular signature-based validation, but validation through DS RR fingerprints.
|
|
|
|
response
This implements RFC 5155, Section 8.8 and RFC 4035, Section 5.3.4:
When we receive a response with an RRset generated from a wildcard we
need to look for one NSEC/NSEC3 RR that proves that there's no explicit RR
around before we accept the wildcard RRset as response.
This patch does a couple of things: the validation calls will now
identify wildcard signatures for us, and let us know the RRSIG used (so
that the RRSIG's signer field let's us know what the wildcard was that
generate the entry). Moreover, when iterating trough the RRsets of a
response we now employ three phases instead of just two.
a) in the first phase we only look for DNSKEYs RRs
b) in the second phase we only look for NSEC RRs
c) in the third phase we look for all kinds of RRs
Phase a) is necessary, since DNSKEYs "unlock" more signatures for us,
hence we shouldn't assume a key is missing until all DNSKEY RRs have
been processed.
Phase b) is necessary since NSECs need to be validated before we can
validate wildcard RRs due to the logic explained above.
Phase c) validates everything else. This phase also handles RRsets that
cannot be fully validated and removes them or lets the transaction fail.
|
|
This adds a DNSSEC= setting to .network files, and makes resolved honour
them.
|
|
After discussing this with Tom, we figured out "allow-downgrade" sounds
nicer.
|
|
When storing negative responses, clamp the SOA minimum TTL (as suggested
by RFC2308) to the TTL of the NSEC/NSEC3 RRs we used to prove
non-existance, if it there is any.
This is necessary since otherwise an attacker might put together a faked
negative response for one of our question including a high-ttl SOA RR
for any parent zone, and we'd use trust the TTL.
|
|
With this patch resolved will properly handle revoked keys, but not
augment the locally configured trust anchor database with newly learned
keys.
Specifically, resolved now refuses validating RRsets with
revoked keys, and it will remove revoked keys from the configured trust
anchors (only until reboot).
This patch does not add logic for adding new keys to the set of trust
anchors. This is a deliberate decision as this only can work with
persistent disk storage, and would result in a different update logic
for stateful and stateless systems. Since we have to support stateless
systems anyway, and don't want to encourage two independent upgrade
paths we focus on upgrading the trust anchor database via the usual OS
upgrade logic.
Whenever a trust anchor entry is found revoked and removed from the
trust anchor a recognizable log message is written, encouraging the user
to update the trust anchor or update his operating system.
|
|
amount of iterations
|
|
|
|
Instead introduce the new return-code DNSSEC_NSEC_CNAME to indicate
this condition. See RFC 6840, Section 4.3.
|
|
This adds a mode that makes resolved automatically downgrade from DNSSEC
support to classic non-DNSSEC resolving if the configured DNS server is
not capable of DNSSEC. Enabling this mode increases compatibility with
crappy network equipment, but of course opens up the system to
downgrading attacks.
The new mode can be enabled by setting DNSSEC=downgrade-ok in
resolved.conf. DNSSEC=yes otoh remains a "strict" mode, where DNS
resolving rather fails then allow downgrading.
Downgrading is done:
- when the server does not support EDNS0+DO
- or when the server supports it but does not augment returned RRs with
RRSIGs. The latter is detected when requesting DS or SOA RRs for the
root domain (which is necessary to do proofs for unsigned data)
|
|
But keep track that the proof is not authenticated.
|
|
OK to be unsigned
This large patch adds a couple of mechanisms to ensure we get NSEC3 and
proof-of-unsigned support into place. Specifically:
- Each item in an DnsAnswer gets two bit flags now:
DNS_ANSWER_AUTHENTICATED and DNS_ANSWER_CACHEABLE. The former is
necessary since DNS responses might contain signed as well as unsigned
RRsets in one, and we need to remember which ones are signed and which
ones aren't. The latter is necessary, since not we need to keep track
which RRsets may be cached and which ones may not be, even while
manipulating DnsAnswer objects.
- The .n_answer_cachable of DnsTransaction is dropped now (it used to
store how many of the first DnsAnswer entries are cachable), and
replaced by the DNS_ANSWER_CACHABLE flag instead.
- NSEC3 proofs are implemented now (lacking support for the wildcard
part, to be added in a later commit).
- Support for the "AD" bit has been dropped. It's unsafe, and now that
we have end-to-end authentication we don't need it anymore.
- An auxiliary DnsTransaction of a DnsTransactions is now kept around as
least as long as the latter stays around. We no longer remove the
auxiliary DnsTransaction as soon as it completed. THis is necessary,
as we now are interested not only in the RRsets it acquired but also
in its authentication status.
|
|
Note that this is not complete yet, as we don't handle wildcard domains
correctly, nor handle domains correctly that use empty non-terminals.
|
|
This adds a new validation result DNSSEC_UNSUPPORTED_ALGORITHM which is
returned when we encounter an unsupported crypto algorithm when trying
to validate RRSIG/DNSKEY combinations. Previously we'd return ENOTSUPP
in this case, but it's better to consider this a non-error DNSSEC
validation result, since our reaction to this case needs to be more like
in cases such as expired or missing keys: we need to keep continue
validation looking for another RRSIG/DNSKEY combination that works
better for us.
This also reworks how dnssec_validate_rrsig_search() propagates errors
from dnssec_validate_rrsig(). Previously, errors such as unsupported
algorithms or expired signatures would not be propagated, but simply be
returned as "missing-key".
|
|
This adds initial support for validating RRSIG/DNSKEY/DS chains when
doing lookups. Proof-of-non-existance, or proof-of-unsigned-zones is not
implemented yet.
With this change DnsTransaction objects will generate additional
DnsTransaction objects when looking for DNSKEY or DS RRs to validate an
RRSIG on a response. DnsTransaction objects are thus created for three
reasons now:
1) Because a user asked for something to be resolved, i.e. requested by
a DnsQuery/DnsQueryCandidate object.
2) As result of LLMNR RR probing, requested by a DnsZoneItem.
3) Because another DnsTransaction requires the requested RRs for
validation of its own response.
DnsTransactions are shared between all these users, and are GC
automatically as soon as all of these users don't need a specific
transaction anymore.
To unify the handling of these three reasons for existance for a
DnsTransaction, a new common naming is introduced: each DnsTransaction
now tracks its "owners" via a Set* object named "notify_xyz", containing
all owners to notify on completion.
A new DnsTransaction state is introduced called "VALIDATING" that is
entered after a response has been receieved which needs to be validated,
as long as we are still waiting for the DNSKEY/DS RRs from other
DnsTransactions.
This patch will request the DNSKEY/DS RRs bottom-up, and then validate
them top-down.
Caching of RRs is now only done after verification, so that the cache is
not poisoned with known invalid data.
The "DnsAnswer" object gained a substantial number of new calls, since
we need to add/remove RRs to it dynamically now.
|
|
The setting controls which kind of DNSSEC validation is done: none at
all, trusting the AD bit, or client-side validation.
For now, no validation is implemented, hence the setting doesn't do much
yet, except of toggling the CD bit in the generated messages if full
client-side validation is requested.
|
|
|
|
This adds most basic operation for doing DNSSEC validation on the
client side. However, it does not actually add the verification logic to
the resolver. Specifically, this patch only includes:
- Verifying DNSKEY RRs against a DS RRs
- Verifying RRSets against a combination of RRSIG and DNSKEY RRs
- Matching up RRSIG RRs and DNSKEY RRs
- Matching up RR keys and RRSIG RRs
- Calculating the DNSSEC key tag from a DNSKEY RR
All currently used DNSSEC combinations of SHA and RSA are implemented. Support
for MD5 hashing and DSA or EC cyphers are not. MD5 and DSA are probably
obsolete, and shouldn't be added. EC should probably be added
eventually, if it actually is deployed on the Internet.
|
