| Age | Commit message (Collapse) | Author |
|---|
|
resolved iteration fix
|
|
Throughout the tree there's spurious use of spaces separating ++ and --
operators from their respective operands. Make ++ and -- operator
consistent with the majority of existing uses; discard the spaces.
|
|
When a transaction is complete, and we notify its owners, make sure we deal
correctly with the requesters removing themselves from the list of owners while
we continue iterating.
This was previously already dealt with with transactions that require other
transactions for DNSSEC purposes, fix this for other possibly transaction
owners too now.
Since iterating through "Set" objects is not safe regarding removal of entries
from it, rework the logic to use two Sets, and move each entry we notified from
one set to the other set before we dispatch the notification. This move operation
requires no additional memory, and enables us to ensure that we don't notify
any object twice.
Fixes: #2676
|
|
When the buffer is allocated on the stack we do not have to check for
failure everywhere. This is especially useful in debug statements, because
we can put dns_resource_key_to_string() call in the debug statement, and
we do not need a seperate if (log_level >= LOG_DEBUG) for the conversion.
dns_resource_key_to_string() is changed not to provide any whitespace
padding. Most callers were stripping the whitespace with strstrip(),
and it did not look to well anyway. systemd-resolve output is not column
aligned anymore.
The result of the conversion is not stored in DnsTransaction object
anymore. It is used only for debugging, so it seems fine to generate it
when needed.
Various debug statements are extended to provide more information.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
Fixes: #2514
|
|
Previously, if a hostanem is resolved with AF_UNSPEC specified, this would be used as indication to resolve both an
AF_INET and an AF_INET6 address. With this change this logic is altered: an AF_INET address is only resolved if there's
actually a routable IPv4 address on the specific interface, and similar an AF_INET6 address is only resolved if there's
a routable IPv6 address. With this in place, it's ensured that the returned data is actually connectable by
applications. This logic mimics glibc's resolver behaviour.
Note that if the client asks explicitly for AF_INET or AF_INET6 it will get what it asked for.
This also simplifies the logic how it is determined whether a specific lookup shall take place on a scope.
Specifically, the checks with dns_scope_good_key() are now moved out of the transaction code and into the query code,
so that we don't even create a transaction object on a specific scope if we cannot execute the resolution on it anyway.
|
|
Following the changes to expose the "routing" and "search" domain concepts in networkd, actually make resolved use
them. It will now use routing domains exclusively for making DNS routing decisions, and use search domains additionally
for extending single-label names.
|
|
|
|
We already properly propagate errors from transactions to queries. Make sure that errors that happened during handling
of query candidates are propagated to the query, too.
|
|
Whenever we encounter an OS error we did not expect, we so far put the transaction into DNS_TRANSACTION_RESOURCES
state. Rename this state to DNS_TRANSACTION_ERRNO, and save + propagate the actual system error to the caller. This
should make error messages triggered by system errors much more readable by the user.
|
|
This way the difference between lookups via NSS and our native bus API should become minimal.
|
|
The LLMNR spec suggests to do do reverse address lookups by doing direct LLMNR/TCP connections to the indicated
address, instead of doing any LLMNR multicast queries. When we do this and the peer doesn't actually implement LLMNR
this will result in a TCP connection error, which we need to handle. In contrast to most LLMNR lookups this will give
us a quick response on whether we can find a suitable name. Report this as new transaction state, since this should
mostly be treated like an NXDOMAIN rcode, except that it's not one.
|
|
Also, while we are at it, set the "authenticated" bit for everything we synthesize
|
|
|
|
the network is down
|
|
|
|
Let's avoid thinking that a CNAME/DNAME chain traversal could be a good idea if QTYPE is already CNAME/DNAME.
(Also, let's bail out early when trying to see if some RR is a suitable CNAME/DNAME for some other RR).
|
|
If the first step was done via a search domain, make sure the subsequent steps are not.
|
|
|
|
Move IDNA logic out of the normal domain name processing, and into the bus frontend calls. Previously whenever
comparing two domain names we'd implicitly do IDNA conversion so that "pöttering.de" and "xn--pttering-n4a.de" would be
considered equal. This is problematic not only for DNSSEC, but actually also against he IDNA specs.
Moreover it creates problems when encoding DNS-SD services in classic DNS. There, the specification suggests using
UTF8 encoding for the actual service name, but apply IDNA encoding to the domain suffix.
With this change IDNA conversion is done only:
- When the user passes a non-ASCII hostname when resolving a host name using ResolveHostname()
- When the user passes a non-ASCII domain suffix when resolving a service using ResolveService()
No IDNA encoding is done anymore:
- When the user does raw ResolveRecord() RR resolving
- On the service part of a DNS-SD service name
Previously, IDNA encoding was done when serializing names into packets, at a point where information whether something
is a label that needs IDNA encoding or not was not available, but at a point whether it was known whether to generate a
classic DNS packet (where IDNA applies), or an mDNS/LLMNR packet (where IDNA does not apply, and UTF8 is used instead
for all host names). With this change each DnsQuery object will now maintain two copies of the DnsQuestion to ask: one
encoded in IDNA for use with classic DNS, and one encoded in UTF8 for use with LLMNR and MulticastDNS.
|
|
|
|
|
|
This ensures we properly resolve the CNAME chain as far as we can, rather
than only CNAME chains of length one.
|
|
Otherwise if we have an A lookup that failed DNSSEC validation, but an
AAAA lookup that succeeded, we might end up using the A data, but we
really should not.
|
|
the the bus client
It's useful to generate useful errors, so let's do that.
|
|
We have many types of failure for a transaction, and
DNS_TRANSACTION_FAILURE was just one specific one of them, if the server
responded with a non-zero RCODE. Hence let's rename this, to indicate
which kind of failure this actually refers to.
|
|
OK to be unsigned
This large patch adds a couple of mechanisms to ensure we get NSEC3 and
proof-of-unsigned support into place. Specifically:
- Each item in an DnsAnswer gets two bit flags now:
DNS_ANSWER_AUTHENTICATED and DNS_ANSWER_CACHEABLE. The former is
necessary since DNS responses might contain signed as well as unsigned
RRsets in one, and we need to remember which ones are signed and which
ones aren't. The latter is necessary, since not we need to keep track
which RRsets may be cached and which ones may not be, even while
manipulating DnsAnswer objects.
- The .n_answer_cachable of DnsTransaction is dropped now (it used to
store how many of the first DnsAnswer entries are cachable), and
replaced by the DNS_ANSWER_CACHABLE flag instead.
- NSEC3 proofs are implemented now (lacking support for the wildcard
part, to be added in a later commit).
- Support for the "AD" bit has been dropped. It's unsafe, and now that
we have end-to-end authentication we don't need it anymore.
- An auxiliary DnsTransaction of a DnsTransactions is now kept around as
least as long as the latter stays around. We no longer remove the
auxiliary DnsTransaction as soon as it completed. THis is necessary,
as we now are interested not only in the RRsets it acquired but also
in its authentication status.
|
|
candidate state
|
|
This adds initial support for validating RRSIG/DNSKEY/DS chains when
doing lookups. Proof-of-non-existance, or proof-of-unsigned-zones is not
implemented yet.
With this change DnsTransaction objects will generate additional
DnsTransaction objects when looking for DNSKEY or DS RRs to validate an
RRSIG on a response. DnsTransaction objects are thus created for three
reasons now:
1) Because a user asked for something to be resolved, i.e. requested by
a DnsQuery/DnsQueryCandidate object.
2) As result of LLMNR RR probing, requested by a DnsZoneItem.
3) Because another DnsTransaction requires the requested RRs for
validation of its own response.
DnsTransactions are shared between all these users, and are GC
automatically as soon as all of these users don't need a specific
transaction anymore.
To unify the handling of these three reasons for existance for a
DnsTransaction, a new common naming is introduced: each DnsTransaction
now tracks its "owners" via a Set* object named "notify_xyz", containing
all owners to notify on completion.
A new DnsTransaction state is introduced called "VALIDATING" that is
entered after a response has been receieved which needs to be validated,
as long as we are still waiting for the DNSKEY/DS RRs from other
DnsTransactions.
This patch will request the DNSKEY/DS RRs bottom-up, and then validate
them top-down.
Caching of RRs is now only done after verification, so that the cache is
not poisoned with known invalid data.
The "DnsAnswer" object gained a substantial number of new calls, since
we need to add/remove RRs to it dynamically now.
|
|
|
|
This adds a new SD_RESOLVED_AUTHENTICATED flag for responses we return
on the bus. When set, then the data has been authenticated. For now this
mostly reflects the DNSSEC AD bit, if DNSSEC=trust is set. As soon as
the client-side validation is complete it will be hooked up to this flag
too.
We also set this bit whenver we generated the data ourselves, for
example, because it originates in our local LLMNR zone, or from the
built-in trust anchor database.
The "systemd-resolve-host" tool has been updated to show the flag state
for the data it shows.
|
|
|
|
|
|
It probably doesn't make sense to mix local and global configuration.
Applying global search lists to local DNS servers appears unnecessary
and creates problems because we'll traverse the search domains
non-simultaneously on multiple scopes.
Also see:
https://github.com/systemd/systemd/pull/2031
|
|
DnsTransaction objects
Previously we'd only store the DnsPacket in the DnsTransaction, and the
DnsQuery would then take the DnsPacket's DnsAnswer and return it. With
this change we already pull the DnsAnswer out inside the transaction.
We still store the DnsPacket in the transaction, if we have it, since we
still need to determine from which peer a response originates, to
implement caching properly. However, the DnsQuery logic doesn't care
anymore for the packet, it now only looks at answers and rcodes from the
successfuly candidate.
This also has the benefit of unifying how we propagate incoming packets,
data from the local zone or the local cache.
|
|
This adds support for searching single-label hostnames in a set of
configured search domains.
A new object DnsQueryCandidate is added that links queries to scopes.
It keeps track of the search domain last used for a query on a specific
link. Whenever a host name was unsuccessfuly resolved on a scope all its
transactions are flushed out and replaced by a new set, with the next
search domain appended.
This also adds a new flag SD_RESOLVED_NO_SEARCH to disable search domain
behaviour. The "systemd-resolve-host" tool is updated to make this
configurable via --search=.
Fixes #1697
|
|
Wen DnsQuestion objects are used for DnsQuery objects all contained keys
have to share the same name, but otherwise they generally don't have to,
and this can actually happen in real-life because DnsPacket objects for
mDNS use DnsQuestion for the question section.
Hence, rename:
dns_question_is_valid() to dns_question_is_valid_for_query(), since the
name uniqueness check it does is only relevant when used for a query.
Similar, rename dns_question_name() to dns_question_first_name(),
to be more accurate, as this difference matters if we keys don#t have to
share the same name.
|
|
This also adds client-side support for this to systemd-resolve-host.
Note that the ResolveService() API can deal both with DNS-SD service
(consisting of service name, type and domain), as well as classic SRV
services (consisting just of a type and a domain), all exposed in the
same call.
This patch also reworks CNAME handling in order to reuse it between
hostname, RR and service lookups.
In contrast to Avahi and Bonjour, this new API will actually reolve the
A/AAAA RRs the SRV RRs point to in one go (unless this is explicitly
disabled). This normally comes for free, as these RRs are sent along
the SRV responses anyway, hence let's make use of that. This makes the
API considerably easier to use, as a single ResolveService() invocation
will return all necessary data to pick a server and connect() to it.
Note that this only implements the DNS-SD resolving step, it does not
implement DNS-SD browsing, as that makes sense primarily on mDNS, due to
its continuous nature.
|
|
|
|
Takes a key and CNAME RR and returns the canonical RR of the right
type. Make use of this in dns_question_redirect().
|
|
So far we handled immediate "no server" query results differently from
"no server" results we ran into during operation: the former would cause
the dns_query_go() call to fail with ESRCH, the later would result in
the query completion callback to be called.
Remove the duplicate codepaths, by always going through the completion
callback. This allows us to remove quite a number of lines for handling
the ESRCH.
This commit should not alter behaviour at all.
|
|
We do so for Unicast DNS and LLMNR anyway, let's also do this for mDNS,
and simplify things.
|
|
Let's simplify things and only maintain a single RR key per transaction
object, instead of a full DnsQuestion. Unicast DNS and LLMNR don't
support multiple questions per packet anway, and Multicast DNS suggests
coalescing questions beyond a single dns query, across the whole system.
|
|
With this change we'll now also generate synthesized RRs for the local
LLMNR hostname (first label of system hostname), the local mDNS hostname
(first label of system hostname suffixed with .local), the "gateway"
hostname and all the reverse PTRs. This hence takes over part of what
nss-myhostname already implemented.
Local hostnames resolve to the set of local IP addresses. Since the
addresses are possibly on different interfaces it is necessary to change
the internal DnsAnswer object to track per-RR interface indexes, and to
change the bus API to always return the interface per-address rather than
per-reply. This change also patches the existing clients for resolved
accordingly (nss-resolve + systemd-resolve-host).
This also changes the routing logic for queries slightly: we now ensure
that the local hostname is never resolved via LLMNR, thus making it
trustable on the local system.
|
|
Let's make sure that clients querying resolved via the bus for A, AAAA
or PTR records for "localhost" get a synthesized, local reply, so that
we do not hit the network.
This makes part of nss-myhostname redundant, if used in conjunction.
However, given that nss-resolve shall be optional we need to keep this
code in both places for now.
|
|
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
something up
Also, return on which protocol/family/interface we found something.
|
