| Age | Commit message (Collapse) | Author |
|---|
|
Make sure we can parse DNS server addresses that use the "zone id" syntax for
local link addresses, i.e. "fe80::c256:27ff:febb:12f%wlp3s0", when reading
/etc/resolv.conf.
Also make sure we spit this out correctly again when writing /etc/resolv.conf
and via the bus.
Fixes: #3359
|
|
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
Previously, if a hostanem is resolved with AF_UNSPEC specified, this would be used as indication to resolve both an
AF_INET and an AF_INET6 address. With this change this logic is altered: an AF_INET address is only resolved if there's
actually a routable IPv4 address on the specific interface, and similar an AF_INET6 address is only resolved if there's
a routable IPv6 address. With this in place, it's ensured that the returned data is actually connectable by
applications. This logic mimics glibc's resolver behaviour.
Note that if the client asks explicitly for AF_INET or AF_INET6 it will get what it asked for.
This also simplifies the logic how it is determined whether a specific lookup shall take place on a scope.
Specifically, the checks with dns_scope_good_key() are now moved out of the transaction code and into the query code,
so that we don't even create a transaction object on a specific scope if we cannot execute the resolution on it anyway.
|
|
Following the changes to expose the "routing" and "search" domain concepts in networkd, actually make resolved use
them. It will now use routing domains exclusively for making DNS routing decisions, and use search domains additionally
for extending single-label names.
|
|
Previously, .network files only knew a vaguely defined "Domains=" concept, for which the documentation declared it was
the "DNS domain" for the network connection, without specifying what that means.
With this the Domains setting is reworked, so that there are now "routing" domains and "search" domains. The former are
to be used by resolved to route DNS request to specific network interfaces, the latter is to be used for searching
single-label hostnames with (in addition to being used for routing). Both settings are configured in the "Domains="
setting. Normal domain names listed in it are now considered search domains (for compatibility with existing setups),
while those prefixed with "~" are considered routing domains only. To route all lookups to a specific interface the
routing domain "." may be used, referring to the root domain. An alternative syntax for this is the "*", as was already
implemented before using the "wildcard" domain concept.
This commit adds proper parsers for this new logic, and exposes this via the sd-network API. This information is not
used by resolved yet, this will be added in a later commit.
|
|
This mimics what networkd is doing to detect a carrier.
|
|
Not only report whether the server actually supports DNSSEC, but also first check whether DNSSEC is actually enabled
for it in our local configuration.
Also, export a per-link DNSSECSupported property in addition to the existing manager-wide property.
|
|
This is useful for alternative network management solutions (such as NetworkManager) to push DNS configuration data
into resolved.
The calls will fail should networkd already have taken possesion of a link, so that the bus API is only available if
we don't get the data from networkd.
|
|
For mDNS and LLMNR we already created the scopes only if the specific interfaces where actually up and suitable for
Multicasting. Add a similar (but weaker) logic for unicast DNS as well.
|
|
If the networkd configuration changes during runtime, make sure to flush all caches when we switch from a less trusted
to a more trusted mode.
|
|
This makes it easier to log information about a specific DnsServer object.
|
|
|
|
This adds a DNSSEC= setting to .network files, and makes resolved honour
them.
|
|
|
|
|
|
|
|
networkd previously knew an enum "ResolveSupport" for configuring
per-interface LLMNR support, resolved had a similar enum just called
"Support", with the same value and similar pasers.
Unify this, call the enum ResolveSupport, and port both daemons to it.
|
|
|
|
Follow what LLMNR does, and create per-link DnsScope objects.
|
|
This copies concepts we introduced for the DnsSearchDomain stuff, and
reworks the operations on lists of dns servers to be reusable and
generic for use both with the Link and the Manager object.
|
|
With this change, we add a new object to resolved, "DnsSearchDomain="
which wraps a search domain. This is then used to introduce a global
search domain list, in addition to the existing per-link search domain
list which is reword to make use of this new object too.
This is preparation for implement proper unicast DNS search domain
support.
|
|
Previously, we'd keep adding new dns servers we discover to the end of
our linked list of servers. When we encountered a pre-existing server,
we'd just leave it where it was. In essence that meant that old servers
ended up at the front, and new servers at the end, but not in an order
that would reflect the configuration.
With this change we ensure that every pre-existing server we want to add
again we move to the back of the linked list, so that the order is
stable and in sync with the requested configuration.
|
|
Previously, there was a chance of memory corruption, because when
switching to the next DNS server we didn't care whether they linked list
of DNS servers was still valid.
Clean up lifecycle of the dns server logic:
- When a DnsServer object is still in the linked list of DnsServers for
a link or the manager, indicate so with a "linked" boolean field, and
never follow the linked list if that boolean is not set.
- When picking a DnsServer to use for a link ot manager, always
explicitly take a reference.
This also rearranges some logic, to make the tracking of dns servers by
link and globally more alike.
|
|
|
|
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
Another Coccinelle patch.
|
|
With this change we'll now also generate synthesized RRs for the local
LLMNR hostname (first label of system hostname), the local mDNS hostname
(first label of system hostname suffixed with .local), the "gateway"
hostname and all the reverse PTRs. This hence takes over part of what
nss-myhostname already implemented.
Local hostnames resolve to the set of local IP addresses. Since the
addresses are possibly on different interfaces it is necessary to change
the internal DnsAnswer object to track per-RR interface indexes, and to
change the bus API to always return the interface per-address rather than
per-reply. This change also patches the existing clients for resolved
accordingly (nss-resolve + systemd-resolve-host).
This also changes the routing logic for queries slightly: we now ensure
that the local hostname is never resolved via LLMNR, thus making it
trustable on the local system.
|
|
We want to reference the servers from their active transactions, so make sure
they stay around as long as the transaction does.
|
|
|
|
Reported by Cristian Rodríguez
http://lists.freedesktop.org/archives/systemd-devel/2015-May/031626.html
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
|
|
THis was accidentally broken, as we truned off LLMNR far to frequently,
where we only wanted to turn off LLMNr on IPV6 on kernels lacking
support for it.
|
|
The link is the 'object', so make this in line with our usual naming convention.
Suggested by Kay and Lennart.
|
|
|
|
This way we can introduce system-wide versions of these calls that are
called the same way, but without the "link" in the name.
|
|
|
|
|
|
|
|
|
|
This way we integrate nicely with foreign network management stacks,
such as NM.
|
|
We now maintain two lists of DNS servers: system servers and fallback
servers.
system servers are used in combination with any per-link servers.
fallback servers are only used if there are no system servers or
per-link servers configured.
The system server list is supposed to be populated from a foreign tool's
/etc/resolv.conf (not implemented yet).
Also adds a configuration switch for LLMNR, that allows configuring
whether LLMNR shall be used simply for resolving or also for responding.
|
|
|
|
|
|
|
|
spec
|
