| Age | Commit message (Collapse) | Author |
|---|
|
CID #1349699-1349700.
|
|
- Move gcrypt.h include inside grcrypt-util.h.
- Allow gcrypt-util.[ch] to be compiled even without gcrypt.
This allows the logic in files using gcrypt to be simplified.
- Fix compilation of systemd-resolve without gcrypt.
systemd-resolved already supported that.
Fixes #2711.
|
|
|
|
https://github.com/systemd/systemd/pull/2508#issuecomment-190901170
Maybe fixes https://bugzilla.redhat.com/show_bug.cgi?id=1308771.
|
|
resolved iteration fix
|
|
|
|
|
|
tree-wide: minor formatting inconsistency cleanups
|
|
|
|
|
|
Throughout the tree there's spurious use of spaces separating ++ and --
operators from their respective operands. Make ++ and -- operator
consistent with the majority of existing uses; discard the spaces.
|
|
When a transaction is complete, and we notify its owners, make sure we deal
correctly with the requesters removing themselves from the list of owners while
we continue iterating.
This was previously already dealt with with transactions that require other
transactions for DNSSEC purposes, fix this for other possibly transaction
owners too now.
Since iterating through "Set" objects is not safe regarding removal of entries
from it, rework the logic to use two Sets, and move each entry we notified from
one set to the other set before we dispatch the notification. This move operation
requires no additional memory, and enables us to ensure that we don't notify
any object twice.
Fixes: #2676
|
|
Usually, we place the #pragma once before the copyright blurb in header files,
but in a few cases we didn't. Move those around, so that we do the same thing
everywhere.
|
|
|
|
Coverity fixes
|
|
CID #1351544, #1351545.
|
|
Better support for DANE, shell completion
|
|
|
|
https://tools.ietf.org/html/rfc6698#section-2.2 says:
> The certificate association data field MUST be represented as a string
> of hexadecimal characters. Whitespace is allowed within the string of
> hexadecimal characters
|
|
$ systemd-resolve --tlsa fedoraproject.org
_443._tcp.fedoraproject.org IN TLSA 0 0 1 GUAL5bejH7czkXcAeJ0vCiRxwMnVBsDlBMBsFtfLF8A=
-- Cert. usage: CA constraint
-- Selector: Full Certificate
-- Matching type: SHA-256
$ systemd-resolve --tlsa=tcp fedoraproject.org:443
_443._tcp.fedoraproject.org IN TLSA 0 0 1 GUAL5bejH7czkXcAeJ0vCiRxwMnVBsDlBMBsFtfLF8A=
...
$ systemd-resolve --tlsa=udp fedoraproject.org
_443._udp.fedoraproject.org: resolve call failed: '_443._udp.fedoraproject.org' not found
v2:
- use uint16_t
- refuse port 0
|
|
resolve: dumping of binary packets
|
|
DNS_TYPE_STRING_MAX causes a problem with the table autogeneration code,
change to _DNS_TYPE_STRING_MAX.
|
|
When the buffer is allocated on the stack we do not have to check for
failure everywhere. This is especially useful in debug statements, because
we can put dns_resource_key_to_string() call in the debug statement, and
we do not need a seperate if (log_level >= LOG_DEBUG) for the conversion.
dns_resource_key_to_string() is changed not to provide any whitespace
padding. Most callers were stripping the whitespace with strstrip(),
and it did not look to well anyway. systemd-resolve output is not column
aligned anymore.
The result of the conversion is not stored in DnsTransaction object
anymore. It is used only for debugging, so it seems fine to generate it
when needed.
Various debug statements are extended to provide more information.
|
|
This fixes formatting of root domain in debug messages:
Old:
systemd-resolved[10049]: Requesting DS to validate transaction 19313 (., DNSKEY with key tag: 19036).
New:
systemd-resolved[10049]: Requesting DS to validate transaction 19313 (, DNSKEY with key tag: 19036).
|
|
With two nested loops and a switch statements, it's quite hard to
understand what break and continue mean.
|
|
|
|
$ systemd-resolve --raw --openpgp zbyszek@fedoraproject.org | pgpdump /dev/stdin
|
|
The output didn't specify if the default for --cname/--search/--legend and
other options was yes or no. Change the description to be explicit about that.
Also make the --help output and man page closer.
|
|
Networkd, resolved, build-sys fixes
|
|
Most domain names we deal with are normalized anyway (since we read them that
way from DNS packets), but some might not (because they are synthesized from
unnormalized configuration or so), hence make sure to normalize all names
before passing them out to clients, to be fully deterministic.
Note that internally we are process normalized and non-normalized names the
same way, and while comparing them ignore the differences due to unnormalized
names. However, that internal implementation detail really shouldn't spill out
the clients, hence make sure to clean it all up.
|
|
authenticated
Doing DNS retrieval on non-authenticated crypt keys is useless, hence warn
loudly about it.
|
|
Let's make sure DNSSEC gets more testing, by defaulting DNSSEC to
"allow-downgrade" mode. Since distros should probably not ship DNSSEC enabled
by default add a configure switch to disable this again.
DNSSEC in "allow-downgrade" mode should mostly work without affecting user
experience. There's one exception: some captive portal systems rewrite DNS in
order to redirect HTTP traffic to the captive portal. If these systems
implement DNS servers that are otherwise DNSSEC-capable (which in fact is
pretty unlikely, but still...), then this will result in the captive portal
being inaccessible. To fix this support in NetworkManager (or any other network
management solution that does captive portal detection) is required, which
simply turns off DNSSEC during the captive portal detection, and resets it back
to the default (i.e. on) after captive portal authentication is complete.
|
|
Fixes: #2457
|
|
If the hostname passed to ResolveHostname() is actually an IP address that is
correctly formatted as string parse it as such, avoid any DNS traffic and
return the data in parsed form.
This is useful for clients which can simply call the bus function now without
caring about the precise formatting of specified hostnames. This mimics
getaddrinfo()'s behaviour with the AI_NUMERICHOST flag set.
Note that this logic is only implemented for ResolveHostname(), but not for
calls such as ResolveRecord(), for which only DNS domain names may be used as
input.
The "authenticated" flag is set for look-ups of this type, after all no
untrusted network traffic is involved.
|
|
Another property name fuck-up. The property contains both search and routing
domains and hence should be exposed as "Domains" rather than "SearchDomains".
The counterpart in the Link object was correctly named, and the
SetLinkDomains() and SetDomains() setter calls too, hence let's get this right,
too.
(Yepp, a minor API break actually, but given that this was so far not
documented, and only 3 days public let's fix this now)
|
|
|
|
By mistake the "DNSSECSupported" bus property of the Link object got named
"DNSSECSupport". Internally, it's named correctly, and the counterpart on the
"Manager" object got named correctly too.
Technically this rename is an API break, but given that the interface is not
documented or widely announced yet, and just 3 days in a published release,
let's just fix this, and hope nobody notices.
|
|
Better support of OPENPGPKEY, CAA, TLSA packets and tests
|
|
Left-over unknown flags are printed numerically. Otherwise,
it wouldn't be known what bits are remaining without knowning
what the known bits are.
A test case is added to verify the flag printing code:
============== src/resolve/test-data/fake-caa.pkts ==============
google.com. IN CAA 0 issue "symantec.com"
google.com. IN CAA 128 issue "symantec.com"
-- Flags: critical
google.com. IN CAA 129 issue "symantec.com"
-- Flags: critical 1
google.com. IN CAA 22 issue "symantec.com"
-- Flags: 22
|
|
|
|
Also add example files with TLSA and SSHFP records.
|
|
|
|
Packets are stored in a simple format:
<size> <packet-wire-format> <size> <packet-wire-format> ...
Packets for some example domains are dumped, to test rr code for various
record types. Currently:
A
AAAA
CAA
DNSKEY
LOC
MX
NS
NSEC
OPENPGPKEY
SOA
SPF
TXT
The hashing code is executed, but results are not checked.
Also build other tests in src/resolve only with --enable-resolve.
|
|
|
|
This makes the behaviour more consistent. Before we would not rewind
after some errors, but this seems to have been an unintentional
omission.
|
|
$ systemd-resolve --openpgp zbyszek@fedoraproject.org
d08ee310438ca124a6149ea5cc21b6313b390dce485576eff96f8722._openpgpkey.fedoraproject.org. IN OPENPGPKEY
mQINBFBHPMsBEACeInGYJCb+7TurKfb6wGyTottCDtiSJB310i37/6ZYoeIay/5soJjlM
yfMFQ9T2XNT/0LM6gTa0MpC1st9LnzYTMsT6tzRly1D1UbVI6xw0g0vE5y2Cjk3xUwAyn
...
|
|
It's annoying to have the exact same function in three places.
It's stored in src/shared, but it's not added to the library to
avoid the dependency on libgcrypt.
|
|
ISO/IEC 9899:1999 §7.21.1/2 says:
Where an argument declared as size_t n specifies the length of the array
for a function, n can have the value zero on a call to that
function. Unless explicitly stated otherwise in the description of a
particular function in this subclause, pointer arguments on such a call
shall still have valid values, as described in 7.1.4.
In base64_append_width memcpy was called as memcpy(x, NULL, 0). GCC 4.9
started making use of this and assumes This worked fine under -O0, but
does something strange under -O3.
This patch fixes a bug in base64_append_width(), fixes a possible bug in
journal_file_append_entry_internal(), and makes use of the new function
to simplify the code in other places.
|
|
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
