| Age | Commit message (Collapse) | Author |
|---|
|
resolved: more mDNS specific bits (3)
|
|
RFC6762, 18.1:
In multicast query messages, the Query Identifier SHOULD be set to
zero on transmission.
|
|
Only .in-addr.arpa and .local are considered local in mDNS, so discard the
packet if anything else is thrown at us.
|
|
Let's simply call it dns_transaction_prepare(), so that we have the nice
cycle for prepare() → go() → emit() → process().
After all it's pretty clear that what we prepare there, and we dont call
the others go_next_attempt(), emit_next_attempt() or
process_next_attempt().
|
|
|
|
This adds initial support for validating RRSIG/DNSKEY/DS chains when
doing lookups. Proof-of-non-existance, or proof-of-unsigned-zones is not
implemented yet.
With this change DnsTransaction objects will generate additional
DnsTransaction objects when looking for DNSKEY or DS RRs to validate an
RRSIG on a response. DnsTransaction objects are thus created for three
reasons now:
1) Because a user asked for something to be resolved, i.e. requested by
a DnsQuery/DnsQueryCandidate object.
2) As result of LLMNR RR probing, requested by a DnsZoneItem.
3) Because another DnsTransaction requires the requested RRs for
validation of its own response.
DnsTransactions are shared between all these users, and are GC
automatically as soon as all of these users don't need a specific
transaction anymore.
To unify the handling of these three reasons for existance for a
DnsTransaction, a new common naming is introduced: each DnsTransaction
now tracks its "owners" via a Set* object named "notify_xyz", containing
all owners to notify on completion.
A new DnsTransaction state is introduced called "VALIDATING" that is
entered after a response has been receieved which needs to be validated,
as long as we are still waiting for the DNSKEY/DS RRs from other
DnsTransactions.
This patch will request the DNSKEY/DS RRs bottom-up, and then validate
them top-down.
Caching of RRs is now only done after verification, so that the cache is
not poisoned with known invalid data.
The "DnsAnswer" object gained a substantial number of new calls, since
we need to add/remove RRs to it dynamically now.
|
|
the DNSKEY's algorithm
As long as we support the digest we are good.
|
|
name, not the owner name
When the DNSKEY is in higher zone, then that's OK, and we need to check
the RRSIG's signer name against the DNSKEY hence.
|
|
We actually maintain an array of pointers to RRs, not of RRs themselves,
fix the qsort() invocation accordingly.
|
|
When increasing the DnsAnswer array, don't operate piecemeal, grow the
array exponentially.
This way, the default logic for DnsAnswer allocations matches the
behaviour for GREEDY_REALLOC and suchlike, and we can reduce the number
of necessary allocations.
|
|
|
|
This got borked in 547493c5ad5c82032e247609970f96be76c2d661.
|
|
It's complicated enough, it deserves its own call.
(Also contains some unrelated whitespace, comment and assertion changes)
|
|
Enforce this while parsing RRs.
|
|
As soon as we encounter the OPT RR while parsing, store it in a special
field in the DnsPacket structure. That way, we won't be confused if we
iterate through RRs, and can check that there's really only one of these
RRs around.
|
|
DnsAnswer objects should be considered immutable after having passed to
more than one user, i.e. with a reference counter > 1. Enforce that in
code, so that we can track down misuses easier.
|
|
libgcrypt encodes the error source in the error code, we need to mask
that away before comparing error codes.
|
|
Let's simplify things, by making this a function call of its own.
|
|
|
|
ifindex variable
|
|
Quoting @teg:
"Contrary to what the comment said, we always verify redirect chains in
full, and cache all the CNAME records. There is therefore no need to
do extra negative caching along a CNAME chain."
This simply steals @teg's commit since we'll touch the SOA matching case
in a later patch, and rather want this bit gone, so that we don't have
to "fix" it, only to remove it later on.
|
|
After all, that's how this is done in DNS, and is particularly important
if we look a DS/DNSKEY RRs for the root zone itself, where the owner
name would otherwise be shown as completely empty (i.e. missing).
|
|
When iterating through RR lists we frequently end up comparing RRs and
RR keys with themselves, hence att a minor optimization to check ptr
values first, before doing a deep comparison.
|
|
DNS RR types are uint16_t after all, treat them as such.
|
|
For mDNS, if we're unable to stuff all known answers into the given packet,
allocate a new one, push the RR into that one and link it to the current
one.
|
|
In dns_scope_emit(), walk the list of additional packets and emit all of
them. Set the TC bit in all but the last of them.
This is specific to mDNS, so an assertion is triggered if used with other
protocols.
|
|
For mDNS, we need to support the TC bit in case the list of known answers
exceed the maximum packet size.
For this, add a 'more' pointer to DnsPacket for an additional packet.
When a packet is unref'ed, the ->more packet is also unrefed, so it
sufficient to only keep track of the 1st packet in a chain.
|
|
We need to support the TC bit in queries in case known answers exceed the
maximum packet size. Factor out the flags compilation to
dns_packet_set_flags() and make it externally available.
|
|
sd_event_add_io() returns the error directly and does not mess with errno.
|
|
DNS names ending with .local are specific to mDNS, so don't use them
on DNS scopes.
|
|
This new functions exports cached records of type PTR, SRV and TXT into
an existing DnsPacket. This is used in order to fill in known records
to mDNS queries, for known answer supression.
|
|
Implement dns_transaction_make_packet_mdns(), a special version of
dns_transaction_make_packet() for mDNS which differs in many ways:
a) We coalesce queries of currently active transaction on the scope.
This is possible because mDNS actually allows many questions in a
to be sent in a single packet and it takes some burden from the
network.
b) Both A and AAAA query keys are broadcast on both IPv4 and IPv6
scopes, because other hosts might only respond on one of their
addresses but resolve both types.
c) We discard previously sent packages (t->sent) so we can start over
and coalesce pending transactions again.
|
|
For each transaction, record when the earliest point in time when the
query packet may hit the wire. This is the same time stamp for which
the timer is scheduled in retries, except for the initial query packets
which are delayed by a random jitter. In this case, we denote that the
packet may actually be sent at the nominal time, without the jitter.
Transactions that share the same timestamp will also have identical
values in this field. It is used to coalesce pending queries in a later
patch.
|
|
Split some code out of dns_transaction_go() so we can re-use it later from
different context. The new function dns_transaction_prepare_next_attempt()
takes care of preparing everything so that a new packet can conditionally
be formulated for a transaction.
This patch shouldn't cause any functional change.
|
|
|
|
|
|
Add the packet dispatching routine for mDNS.
It differs to what LLMNR and DNS dispatchers do in the way it matches
incoming packets. In mDNS, we actually handle all incoming packets,
regardless whether we asked for them earlier or not.
|
|
|
|
mDNS packet timeouts need to be handled per transaction, not per link.
Re-use the n_attempts field for this purpose, as packets timeouts should be
determined by starting at 1 second, and doubling the value on each try.
|
|
When a jitter callback is issued instead of sending a DNS packet directly,
on_transaction_timeout() is invoked to 'retry' the transaction. However,
this function has side effects. For once, it increases the packet loss
counter on the scope, and it also unrefs/refs the server instances.
Fix this by tracking the jitter with two bool variables. One saying that
the initial jitter has been scheduled in the first place, and one that
tells us the delay packet has been sent.
|
|
In mDNS, DNS_RESOURCE_KEY_CACHE_FLUSH denotes whether other records with the
same key should be flushed from the cache.
|
|
MDNS has a 'key cache flush' flag for records which must be masked out for
the parsers to do our right thing. We will also use that flag later (in a
different patch) in order to alter the cache behavior.
|
|
The logic is to kick off mDNS packets in a delayed way is mostly identical
to what LLMNR needs, except that the constants are different.
|
|
Follow what LLMNR does, and create per-link DnsScope objects.
|
|
Per link, join the mDNS multicast groups when the scope is created, and
leave it again when the scope goes away.
|
|
Validate mDNS queries and responses by looking at some header fields,
add mDNS flags.
|
|
Just hook up mDNS listeners with an empty packet dispather function,
introduce a config directive, man page updates etc.
|
|
|
|
|
|
This adds a new SD_RESOLVED_AUTHENTICATED flag for responses we return
on the bus. When set, then the data has been authenticated. For now this
mostly reflects the DNSSEC AD bit, if DNSSEC=trust is set. As soon as
the client-side validation is complete it will be hooked up to this flag
too.
We also set this bit whenver we generated the data ourselves, for
example, because it originates in our local LLMNR zone, or from the
built-in trust anchor database.
The "systemd-resolve-host" tool has been updated to show the flag state
for the data it shows.
|
