| Age | Commit message (Collapse) | Author |
|---|
|
Move IDNA logic out of the normal domain name processing, and into the bus frontend calls. Previously whenever
comparing two domain names we'd implicitly do IDNA conversion so that "pöttering.de" and "xn--pttering-n4a.de" would be
considered equal. This is problematic not only for DNSSEC, but actually also against he IDNA specs.
Moreover it creates problems when encoding DNS-SD services in classic DNS. There, the specification suggests using
UTF8 encoding for the actual service name, but apply IDNA encoding to the domain suffix.
With this change IDNA conversion is done only:
- When the user passes a non-ASCII hostname when resolving a host name using ResolveHostname()
- When the user passes a non-ASCII domain suffix when resolving a service using ResolveService()
No IDNA encoding is done anymore:
- When the user does raw ResolveRecord() RR resolving
- On the service part of a DNS-SD service name
Previously, IDNA encoding was done when serializing names into packets, at a point where information whether something
is a label that needs IDNA encoding or not was not available, but at a point whether it was known whether to generate a
classic DNS packet (where IDNA applies), or an mDNS/LLMNR packet (where IDNA does not apply, and UTF8 is used instead
for all host names). With this change each DnsQuery object will now maintain two copies of the DnsQuestion to ask: one
encoded in IDNA for use with classic DNS, and one encoded in UTF8 for use with LLMNR and MulticastDNS.
|
|
If the poinetrs are equal, we don't have to do a deep comparison.
This is similar to a similar optimization we already have in place for RRs and keys.
|
|
Also verify whether the DNS RR types are actually suitable for a question.
|
|
|
|
|
|
If we have a signed DNAME RR response, there's no need to insist on a signature for a CNAME RR response, after all it
is unlikely to be signed, given the implicit synthethis of CNAME through DNAME RRs.
|
|
|
|
Quite often we read the same RR key multiple times from the same message. Try to replace them by a single object when
we notice this. Do so again when we add things to the cache.
This should reduce memory consumption a tiny bit.
|
|
If the networkd configuration changes during runtime, make sure to flush all caches when we switch from a less trusted
to a more trusted mode.
|
|
restart transaction
In some cases we learn something about a server's feature level through its responses. If we notice that after doing
basic checking of a response, and after collecting all auxiliary DNSSEC info the feature level of the server is lower
than where we started, restart the whole transaction.
This is useful to deal with servers that response rubbish when talked to with too high feature levels.
|
|
feature level
Let's make sure we first check if the OPT was lost in the reply, before we accept a reply as successful and use it for
verifying the current feature level.
|
|
transactions
When we restart a DNS transaction, remove all connections to any auxiliary DNSSEC transactions, after all we might
acquire completely different data this time, requiring different auxiliary DNSSEC transactions.
|
|
downgrade what we verified
If we receive a reply that lacks the OPT RR, then this is reason to downgrade what was verified before, as it's
apparently no longer true, and the previous OPT RR we saw was only superficially OK.
Similar, if we realize that RRSIGs are not augmented, then also downgrade the feature level that was verified, as
DNSSEC is after all not supported. This check is in particular necessary, as we might notice the fact that RRSIG is not
augmented only very late, when verifying the root domain.
Also, when verifying a successful response, actually take in consideration that it might have been reported already
that RRSIG or OPT are missing in the response.
|
|
reason to
This adds logic to downgrade the feature level more aggressively when we have reason to. Specifically:
- When we get a response packet that lacks an OPT RR for a query that had it. If so, downgrade immediately to UDP mode,
i.e. don't generate EDNS0 packets anymore.
- When we get a response which we are sure should be signed, but lacks RRSIG RRs, we downgrade to EDNS0 mode, i.e.
below DO mode, since DO is apparently not really supported.
This should increase compatibility with servers that generate non-sensical responses if they messages with OPT RRs and
suchlike, for example the situation described here:
https://open.nlnetlabs.nl/pipermail/dnssec-trigger/2014-November/000376.html
This also changes the downgrade code to explain in a debug log message why a specific downgrade happened.
|
|
This validates OPT RRs more rigorously, before honouring them: if we any of the following condition holds, we'll ignore
them:
a) Multiple OPT RRs in the same message
b) OPT RR not owned by the root domain
c) OPT RR in the wrong section (Belkin routers do this)
d) OPT RR contain rfc6975 algorithm data (Belkin routers do this)
e) OPT version is not 0
f) OPT payload doesn't add up with the lengths
Note that d) may be an indication that the server just blindly copied OPT data from the response into the reply.
RFC6975 data is only supposed to be included in queries, and we do so. It's not supposed to be included in responses
(and the RFC is very clear on that). Hence if we get it back in a reply, then the server probably just copied the OPT
RR.
|
|
|
|
This new test case tries to resolve a couple of known domains, to verify the validation results. It talks to resolved
via the bus, thus comprehensively testing the whole shebang.
Of course, it requires network connectivity and a DNSSEC capable DNS server, hence this is a manual test.
|
|
This fills in the last few gaps:
- When checking if a domain is non-existing, also check that no wildcard for it exists
- Ensure we don't base "covering" tests on NSEC RRs from a parent zone
- Refuse to accept expanded wildcard NSEC RRs for absence proofs.
|
|
wildcard domains
|
|
empty non-terminals generally lack NSEC RRs, which means we can deduce their existance only from the fact that there
are other RRs that contain them in their suffix. Specifically, the NSEC proof for NODATA on ENTs works by sending the
NSEC whose next name is a suffix of the queried name to the client. Use this information properly.
|
|
This should clarify that this is not regular signature-based validation, but validation through DS RR fingerprints.
|
|
We can user signer and synthesizing source information to check that the NSEC3 RRs we want to use are
actually reasonable and properly signed.
|
|
source and zone in each RR
Having this information available is useful when we need to check whether various RRs are suitable for proofs. This
information is stored in the RRs as number of labels to skip from the beginning of the owner name to reach the
synthesizing source/signer. Simple accessor calls are then added to retrieve the signer/source from the RR using this
information.
This also moves validation of a a number of RRSIG parameters into a new call dnssec_rrsig_prepare() that as side-effect
initializes the two numeric values.
|
|
When proving NODATA DS lookups we need to insist on looking at the parent zone's NSEC RR, not the child zone's.
When proving any other NODATA lookups we need to insist on looking at the child zone's NSEC RR, not the parent's.
|
|
unsupported digest algorithm
|
|
Add extra checks when validating with RRSIGs. This follows recommendations from:
http://www.george-barwood.pwp.blueyonder.co.uk/DnsServer/NotesOnDNSSSEC.htm
|
|
|
|
|
|
Properly handle RRs that begin with an asterisk label. These are the unexpanded forms of wildcard domains and appear in
NSEC RRs for example. We need to make sure we handle the signatures of these RRs properly, since they mostly are
considered normal RRs, except that the RRSIG labels counter is one off for them, as the asterisk label is always
excluded of the signature.
|
|
Let's determine the source of synthesis once instead of for each RR in the RRset.
|
|
|
|
|
|
|
|
We wouldn't know how to validate them, since they are the signatures, and hence have no signatures.
|
|
Given how fragile DNS servers are with some DNS types, and given that we really should avoid confusing them with
known-weird lookups, refuse doing lookups for known-obsolete RR types.
|
|
current_feature_level
This is a follow-up for f4461e5641d53f27d6e76e0607bdaa9c0c58c1f6.
|
|
its own
A suggested by Vito Caputo:
https://github.com/systemd/systemd/pull/2289#discussion-diff-49276220
|
|
|
|
DNSSEC
Move detection into a set of new functions, that check whether one specific server can do DNSSEC, whether a server and
a specific transaction can do DNSSEC, or whether a transaction and all its auxiliary transactions could do so.
Also, do these checks both before we acquire additional RRs for the validation (so that we can skip them if the server
doesn't do DNSSEC anyway), and after we acquired them all (to see if any of the lookups changed our opinion about the
servers).
THis also tightens the checks a bit: a server that lacks TCP support is considered incompatible with DNSSEC too.
|
|
This makes it easier to log information about a specific DnsServer object.
|
|
This changes the DnsServer logic to count failed UDP and TCP failures separately. This is useful so that we don't end
up downgrading the feature level from one UDP level to a lower UDP level just because a TCP connection we did because
of a TC response failed.
This also adds accounting of truncated packets. If we detect incoming truncated packets, and count too many failed TCP
connections (which is the normal fall back if we get a trucnated UDP packet) we downgrade the feature level, given that
the responses at the current levels don't get through, and we somehow need to make sure they become smaller, which they
will do if we don't request DNSSEC or EDNS support.
This makes resolved work much better with crappy DNS servers that do not implement TCP and only limited UDP packet
sizes, but otherwise support DNSSEC RRs. They end up choking on the generally larger DNSSEC RRs and there's no way to
retrieve the full data.
|
|
|
|
|
|
|
|
supporting them
If we already degraded the feature level below DO don't bother with sending requests for DS, DNSKEY, RRSIG, NSEC, NSEC3
or NSEC3PARAM RRs. After all, we cannot do DNSSEC validation then anyway, and we better not press a legacy server like
this with such modern concepts.
This also has the benefit that when we try to validate a response we received using DNSSEC, and we detect a limited
server support level while doing so, all further auxiliary DNSSEC queries will fail right-away.
|
|
|
|
TCP or vice versa
Under the assumption that packet failures (i.e. FORMERR, SERVFAIL, NOTIMP) are caused by packet contents, not used
transport, we shouldn't switch between UDP and TCP when we get them, but only downgrade the higher levels down to UDP.
|
|
UDP ICMP errors are reported to us via recvmsg() when we read a reply. Handle this properly, and consider this a lost
packet, and retry the connection.
This also adds some additional logging for invalid incoming packets.
|
|
Previously, when we couldn't connect to a DNS server via TCP we'd abort the whole transaction using a
"connection-failure" state. This change removes that, and counts failed connections as "lost packet" events, so that
we switch back to the UDP protocol again.
|
|
If we failed to contact a DNS server via TCP, bump of the feature level to UDP again. This way we'll switch back
between UDP and TCP if we fail to contact a host.
Generally, we prefer UDP over TCP, which is why UDP is a higher feature level. But some servers only support UDP but
not TCP hence when reaching the lowest feature level of TCP and want to downgrade from there, pick UDP again. We this
keep downgrading until we reach TCP and then we cycle through UDP and TCP.
|
