| Age | Commit message (Collapse) | Author |
|---|
|
Since 95f1d6bfecde60b245fae1ab0313b550201e7880 we'll subscribe to unit
signals to figure out when to disconnect the pty. But that can only work
correctly if we actually subscribe to the unit's signals. Hence,
explicitly pin (and thus subscribe to) the unit we just created not only
in --wait mode but also in --pty mode.
Or to say this differently: we need to pin the unit in the same cases as
we install the signal match. 95f1d6bfecde60b245fae1ab0313b550201e7880
forgot to do that.
This is relevant to make sure systemd-run works correctly in --user
mode, and correctly exits when the spawned service dies. To test:
systemd-run --user -t /bin/bash
And then press ^D. This will hang before this change, but exit cleanly
after it.
|
|
And then show it, to make things a bit friendlier to the user if we fail
acquiring some props.
In fact, this fixes a number of actual bugs, where we used an error
structure for output that we actually never got an error in.
|
|
This reworks systemd-run so that in --pty mode we watch the unit state
the way we do it in --wait mode. Whenever we notice that the service is
in failed or inactive state finish right-away, but first write all
unwritten characters we can read from the master TTY device.
This makes sure that when the TTY service fails before it opens the
slave PTY device we properly notice that and exit early, so that borked
start parameters result in immediate systemd-run failure. Previously,
we'd not notice this at all, as a PTY slave that never was opened won't
result in POLLHUP events, and we'd hence simply keep reading from it
forever.
In essence, --pty now enables the same unit watching logic that --wait
enables. However, unless --wait is specified we won#t show the final
summary, hence the effective difference should be pretty minimal.
Fixes: #3915
|
|
If the PTY forwarder is still around our TTY will have borked settings,
regarding newlines, hence explicitly close it before showing the
summary, so that it looks pretty.
|
|
|
|
D-Bus is inherently racy when a function returns an object path for a
newly allocated object the client shall watch: as the object already
exists before the client can subscribe to it, it might lose messages
from it.
Let's fix this, by explicitly querying unit properties right after
subscribing to its property changes.
Fixes: #4920
|
|
We don't have plural in the name of any other -util files and this
inconsistency trips me up every time I try to type this file name
from memory. "formats-util" is even hard to pronounce.
|
|
This makes strjoin and strjoina more similar and avoids the useless final
argument.
spatch -I . -I ./src -I ./src/basic -I ./src/basic -I ./src/shared -I ./src/shared -I ./src/network -I ./src/locale -I ./src/login -I ./src/journal -I ./src/journal -I ./src/timedate -I ./src/timesync -I ./src/nspawn -I ./src/resolve -I ./src/resolve -I ./src/systemd -I ./src/core -I ./src/core -I ./src/libudev -I ./src/udev -I ./src/udev/net -I ./src/udev -I ./src/libsystemd/sd-bus -I ./src/libsystemd/sd-event -I ./src/libsystemd/sd-login -I ./src/libsystemd/sd-netlink -I ./src/libsystemd/sd-network -I ./src/libsystemd/sd-hwdb -I ./src/libsystemd/sd-device -I ./src/libsystemd/sd-id128 -I ./src/libsystemd-network --sp-file coccinelle/strjoin.cocci --in-place $(git ls-files src/*.c)
git grep -e '\bstrjoin\b.*NULL' -l|xargs sed -i -r 's/strjoin\((.*), NULL\)/strjoin(\1)/'
This might have missed a few cases (spatch has a really hard time dealing
with _cleanup_ macros), but that's no big issue, they can always be fixed
later.
|
|
This adds a new call get_user_creds_clean(), which is just like
get_user_creds() but returns NULL in the home/shell parameters if they contain
no useful information. This code previously lived in execute.c, but by
generalizing this we can reuse it in run.c.
|
|
permit bus clients to pin units to avoid automatic GC
|
|
|
|
|
|
Let's improve the --help text a bit, and other changes.
|
|
This is done exactly the same way a couple of times at various places, let's
unify this into one version.
|
|
This adds parse_nice() that parses a nice level and ensures it is in the right
range, via a new nice_is_valid() helper. It then ports over a number of users
to this.
No functional changes.
|
|
systemd-run --help says:
-E --setenv=NAME=VALUE Set environment
|
|
We'd call sd_bus_message_unref and then proceed to use
variables pointing into the reply buffer (fd and char*).
dup the fd and copy the string before destorying the reply.
This makes systemd-run run again for me.
https://bugzilla.redhat.com/show_bug.cgi?id=1337636
|
|
systemd-run: fix --slice= in conjunction with --scope
|
|
Fixes: #2991
|
|
Previously we'd have generally useful sd-bus utilities in bust-util.h,
intermixed with code that is specifically for writing clients for PID 1,
wrapping job and unit handling. Let's split the latter out and move it into
bus-unit-util.c, to make the sources a bit short and easier to grok.
|
|
|
|
Keep the previous option name as hidden, for compatibility.
Fixes #3054.
|
|
In 110ceee58e5bc796c03a7db2109f85a999d5bc2e we removed the period after
printing the started units. This makes copying the unit name easier but
results in improper English.
This adds a colon before printing the units, which makes the output
look better.
|
|
If you start a unit with systemd-run you usually need its name to
inspect it or stop it. Removing the period makes copying the unit name
easier.
|
|
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
Make sure we can properly process resource limit properties. Specifically, allow transient configuration of both the
soft and hard limit, the same way from the unit files. Previously, only the the hard rlimits could be configured but
they'd implicitly spill into the soft hard rlimits.
This also updates the client-side code to be able to parse hard/soft resource limit specifications. Since we need to
serialize two properties in bus_append_unit_property_assignment() now, the marshalling of the container around it is
now moved into the function itself. This has the benefit of shortening the calling code.
As a side effect this now beefs up the rlimit parser of "systemctl set-property" to understand time and disk sizes
where that's appropriate.
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
|
|
ID, fallback to random
Previously we used the process ID to generate transient unit names.
However, that is problematic as PIDs get reused easily, and applying
them to remote systems makes little sense.
Fortunately, each bus peer gets a unique, non-reusable ID assigned when
attaching to a bus, hence let's use that, if we can. In some cases we
cannot however, because we connect directly to PID's private socket, and
thus are not a proper bus peer with a unique ID. In that case generate a
random UUID to name the unit after.
|
|
Sort the includes accoding to the new coding style.
|
|
|
|
|
|
|
|
Fixes: #1672
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
Modernize the code a bit:
- Get rid of FOREACH_WORD_SEPARATOR() loop in favour of a
extract_first_word() loop.
- Remove find_binary()'s "local" flag. It's not reasonably possible to
look for binaries on remote systems, we hence should not pretend we
could.
- When we cannot find a suitable binary, return the last error returned
from access() rather than ENOENT unconditionally.
- Rework fsck_exists() and mkfs_exists() to return 1 on success, 0 if
the implementation is missing and negative on real errors. This is
more like we do it in other functions.
- Make sure we also detect direct fsck symlinks to "true", rather than
just absolute ones to /bin/true.
|
|
Including a fix for properly freeing a calendarspec object after use.
|
|
|
|
Previously, we'd allocate the TTY, spawn a service on it, but
immediately start processing the TTY and forwarding it to whatever the
commnd was started on. This is however problematic, as the TTY might get
actually opened only much later by the service. We'll hence first get
EIOs on the master as the other side is still closed, and hence
considered it hung up and terminated the session.
With this change we add a flag to the pty forwarding logic:
PTY_FORWARD_IGNORE_INITIAL_VHANGUP. If set, we'll ignore all hangups
(i.e. EIOs) on the master PTY until the first byte is successfully read.
From that point on we consider a hangup/EIO a regular connection termination. This
way, we handle the race: when we get EIO initially we'll ignore it,
until the connection is properly set up, at which time we start
honouring it.
|
|
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus,
while sd_bus_default_xyz() family tries to reuse the thread's default
bus. bus_open_transport() sometimes internally uses the former,
sometimes the latter family, but suggests it only calls the former via
its name. Hence, let's avoid this confusion, and generically rename the
call to bus_connect_transport().
Similar for all related calls.
And while we are at it, also change cgls + cgtop to do direct systemd
connections where possible, since all they do is talk to systemd itself.
|
|
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
|
|
It makes assumptions about the pty path, hence better call it in the
container namespace rather than the host.
|
|
|
|
Use free_and_strdup() where appropriate and replace equivalent,
open-coded versions.
|
|
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush()
(which writes all unwritten messages out) + sd_bus_close() (which
terminates the connection, releasing all unread messages) +
sd_bus_unref() (which frees the connection).
The combination of this call is used pretty frequently in systemd tools
right before exiting, and should also be relevant for most external
clients, and is hence useful to cover in a call of its own.
Previously the combination of the three calls was already done in the
_cleanup_bus_close_unref_ macro, but this was only available internally.
Also see #327
|
|
This ports a lot of manual code over to sigprocmask_many() and friends.
Also, we now consistly check for sigprocmask() failures with
assert_se(), since the call cannot realistically fail unless there's a
programming error.
Also encloses a few sd_event_add_signal() calls with (void) when we
ignore the return values for it knowingly.
|
|
Follow up for 7c918141ed.
|
|
No functional changes.
|
|
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
|
