summaryrefslogtreecommitdiff
path: root/src/run
AgeCommit message (Collapse)Author
2015-10-25run: fix "couldn't find executable" for the existing executablesEvgeny Vereshchagin
Fixes: #1672
2015-10-25util-lib: split out fd-related operations into fd-util.[ch]Lennart Poettering
There are more than enough to deserve their own .c file, hence move them over.
2015-10-24path-util: rework find_binary(), fsck_exists() and mkfs_exists()Lennart Poettering
Modernize the code a bit: - Get rid of FOREACH_WORD_SEPARATOR() loop in favour of a extract_first_word() loop. - Remove find_binary()'s "local" flag. It's not reasonably possible to look for binaries on remote systems, we hence should not pretend we could. - When we cannot find a suitable binary, return the last error returned from access() rather than ENOENT unconditionally. - Rework fsck_exists() and mkfs_exists() to return 1 on success, 0 if the implementation is missing and negative on real errors. This is more like we do it in other functions. - Make sure we also detect direct fsck symlinks to "true", rather than just absolute ones to /bin/true.
2015-10-08run: various modernizations and smaller fixesLennart Poettering
Including a fix for properly freeing a calendarspec object after use.
2015-10-08basic: move two more terminal-related calls into terminal-util.[ch]Lennart Poettering
2015-10-07machinectl: fix race when opening new shells with "machinectl shell"Lennart Poettering
Previously, we'd allocate the TTY, spawn a service on it, but immediately start processing the TTY and forwarding it to whatever the commnd was started on. This is however problematic, as the TTY might get actually opened only much later by the service. We'll hence first get EIOs on the master as the other side is still closed, and hence considered it hung up and terminated the session. With this change we add a flag to the pty forwarding logic: PTY_FORWARD_IGNORE_INITIAL_VHANGUP. If set, we'll ignore all hangups (i.e. EIOs) on the master PTY until the first byte is successfully read. From that point on we consider a hangup/EIO a regular connection termination. This way, we handle the race: when we get EIO initially we'll ignore it, until the connection is properly set up, at which time we start honouring it.
2015-09-29bus-util: rename bus_open_transport() to bus_connect_transport()Lennart Poettering
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus, while sd_bus_default_xyz() family tries to reuse the thread's default bus. bus_open_transport() sometimes internally uses the former, sometimes the latter family, but suggests it only calls the former via its name. Hence, let's avoid this confusion, and generically rename the call to bus_connect_transport(). Similar for all related calls. And while we are at it, also change cgls + cgtop to do direct systemd connections where possible, since all they do is talk to systemd itself.
2015-09-29util: introduce common version() implementation and use it everywhereLennart Poettering
This also allows us to drop build.h from a ton of files, hence do so. Since we touched the #includes of those files, let's order them properly according to CODING_STYLE.
2015-09-01machined: call unlockpt() in container, not hostLennart Poettering
It makes assumptions about the pty path, hence better call it in the container namespace rather than the host.
2015-09-01run: enable interactive authorizationEvgeny Vereshchagin
2015-07-30tree-wide: use free_and_strdup()Daniel Mack
Use free_and_strdup() where appropriate and replace equivalent, open-coded versions.
2015-07-03sd-bus: introduce new sd_bus_flush_close_unref() callLennart Poettering
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush() (which writes all unwritten messages out) + sd_bus_close() (which terminates the connection, releasing all unread messages) + sd_bus_unref() (which frees the connection). The combination of this call is used pretty frequently in systemd tools right before exiting, and should also be relevant for most external clients, and is hence useful to cover in a call of its own. Previously the combination of the three calls was already done in the _cleanup_bus_close_unref_ macro, but this was only available internally. Also see #327
2015-06-15everywhere: port everything to sigprocmask_many() and friendsLennart Poettering
This ports a lot of manual code over to sigprocmask_many() and friends. Also, we now consistly check for sigprocmask() failures with assert_se(), since the call cannot realistically fail unless there's a programming error. Also encloses a few sd_event_add_signal() calls with (void) when we ignore the return values for it knowingly.
2015-06-10Fix typoZbigniew Jędrzejewski-Szmek
Follow up for 7c918141ed.
2015-05-29util: split out signal-util.[ch] from util.[ch]Lennart Poettering
No functional changes.
2015-05-05core: rework unit name validation and manipulation logicLennart Poettering
A variety of changes: - Make sure all our calls distuingish OOM from other errors if OOM is not the only error possible. - Be much stricter when parsing escaped paths, do not accept trailing or leading escaped slashes. - Change unit validation to take a bit mask for allowing plain names, instance names or template names or an combination thereof. - Refuse manipulating invalid unit name
2015-04-28run: by default, wait until the transient unit finished start-upLennart Poettering
Make this blocking behaviour optional with --no-block, similar to systemctl's switch of this name.
2015-04-28run: synchronously wait until the scope unit we create is startedLennart Poettering
Otherwise it might happen that by the time PID 1 adds our process to the scope unit the process might already have died, if the process is short-running (such as an invocation to /bin/true). https://bugs.freedesktop.org/show_bug.cgi?id=86520
2015-04-10shared: add formats-util.hRonny Chevalier
2015-02-18nspawn: when connected to pipes for stdin/stdout, pass them as-is to PID 1Lennart Poettering
Previously we always invoked the container PID 1 on /dev/console of the container. With this change we do so only if nspawn was invoked interactively (i.e. its stdin/stdout was connected to a TTY). In all other cases we directly pass through the fds unmodified. This has the benefit that nspawn can be added into shell pipelines. https://bugs.freedesktop.org/show_bug.cgi?id=87732
2015-02-18run: if we fail to set a property assignment then really failLennart Poettering
2015-02-03util: rework strappenda(), and rename it strjoina()Lennart Poettering
After all it is now much more like strjoin() than strappend(). At the same time, add support for NULL sentinels, even if they are normally not necessary.
2015-01-27notify,firstboot,analyze,run: trim --help output to 80 linesZbigniew Jędrzejewski-Szmek
2015-01-07machinectl: make sure that "machinectl login" exits immediately when the ↵Lennart Poettering
machine it is connected to dies
2014-12-25run: uninitialized variableZbigniew Jędrzejewski-Szmek
2014-12-24sd-bus: rename sd_bus_open_system_container() to sd_bus_open_system_machine()Lennart Poettering
Pretty much everywhere else we use the generic term "machine" when referring to containers in API, so let's do though in sd-bus too. In particular, since the concept of a "container" exists in sd-bus too, but as part of the marshalling system.
2014-12-23systemd-run: support -t mode when combined with -MLennart Poettering
For that, ask machined for a container PTY and use that.
2014-12-23systemd-run: add --quiet mode to suppress informational message on TTY usageLennart Poettering
2014-12-23run: add a new "-t" mode for invoking a binary on an allocated TTYLennart Poettering
2014-12-09run: introduce timer support optionWaLyong Cho
Support timer options --on-active=, --on-boot=, --on-startup=, --on-unit-active=, --on-unit-inactive=, --on-calendar=. Each options corresponding with OnActiveSec=, OnBootSec=, OnStartupSec=, OnUnitActiveSec=, OnUnitInactiveSec=, OnCalendar= of timer respectively. And OnCalendar= and WakeSystem= supported by --timer-property= option like --property= of systemd-run. And if --unit= option and timer options are specified the command can be omitted. In this case, systemd-run assumes the target service is already loaded. And just try to generate transient timer unit only.
2014-11-28treewide: another round of simplificationsMichal Schmidt
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno + return simplifications".
2014-11-28treewide: use log_*_errno whenever %m is in the format stringMichal Schmidt
If the format string contains %m, clearly errno must have a meaningful value, so we might as well use log_*_errno to have ERRNO= logged. Using: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/' Plus some whitespace, linewrap, and indent adjustments.
2014-11-28treewide: yet more log_*_errno + return simplificationsMichal Schmidt
Using: find . -name '*.[ch]' | while read f; do perl -i.mmm -e \ 'local $/; local $_=<>; s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg; print;' $f done And a couple of manual whitespace fixups.
2014-11-28treewide: more log_*_errno() conversions, multiline callsMichal Schmidt
Basically: find . -name '*.[ch]' | while read f; do perl -i.mmm -e \ 'local $/; local $_=<>; s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \ $f; done Plus manual indentation fixups.
2014-11-28treewide: no need to negate errno for log_*_errno()Michal Schmidt
It corrrectly handles both positive and negative errno values.
2014-11-28treewide: auto-convert the simple cases to log_*_errno()Michal Schmidt
As a followup to 086891e5c1 "log: add an "error" parameter to all low-level logging calls and intrdouce log_error_errno() as log calls that take error numbers", use sed to convert the simple cases to use the new macros: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/' Multi-line log_*() invocations are not covered. And we also should add log_unit_*_errno().
2014-11-22Do not check for existence of remote binariesZbigniew Jędrzejewski-Szmek
systemd-run would fail when run with -M or -H and an absolute path, if this path did not exists locally. Allow it to continue, since we don't have a nice way of checking if the binary exists remotely. The case where -M or -H is used and a local path is unchanged, and we still iterate over $PATH to find the binary. We need to convert to an absolute path, and we don't have a nice mechanism to check remotely, so we assume that the binary will be located in the same place locally and remotely. http://lists.freedesktop.org/archives/systemd-devel/2014-November/025418.html
2014-08-04bus: always explicitly close bus from main programsLennart Poettering
Since b5eca3a2059f9399d1dc52cbcf9698674c4b1cf0 we don't attempt to GC busses anymore when unsent messages remain that keep their reference, when they otherwise are not referenced anymore. This means that if we explicitly want connections to go away, we need to close them. With this change we will no do so explicitly wherver we connect to the bus from a main program (and thus know when the bus connection should go away), or when we create a private bus connection, that really should go away after our use. This fixes connection leaks in the NSS and PAM modules.
2014-08-03Unify parse_argv styleZbigniew Jędrzejewski-Szmek
getopt is usually good at printing out a nice error message when commandline options are invalid. It distinguishes between an unknown option and a known option with a missing arg. It is better to let it do its job and not use opterr=0 unless we actually want to suppress messages. So remove opterr=0 in the few places where it wasn't really useful. When an error in options is encountered, we should not print a lengthy help() and overwhelm the user, when we know precisely what is wrong with the commandline. In addition, since help() prints to stdout, it should not be used except when requested with -h or --help. Also, simplify things here and there.
2014-07-26Always check asprintf return codeKarel Zak
There is a small number of the places in sources where we don't check asprintf() return code and assume that after error the function returns NULL pointer via the first argument. That's wrong, after error the content of pointer is undefined.
2014-05-26analyze/run: use bus_open_transport_systemd instead of bus_open_transportThomas Bächler
Both systemd-analyze and systemd-run only access org.freedesktop.systemd1 on the bus. This patch allows using systemd-run --user and systemd-analyze --user even if the user session's bus is not properly integrated with the systemd user unit. https://bugs.freedesktop.org/show_bug.cgi?id=79252 and other reports...
2014-05-15Remove unnecessary casts in printfsZbigniew Jędrzejewski-Szmek
No functional change expected :)
2014-03-05systemd-run: don't print error messages twiceLennart Poettering
2014-03-05systemd-run: make sure --nice=, --uid=, --gid=, --setenv= also work in ↵Lennart Poettering
--scope mode
2014-03-05systemd-run: add some extra safety checksLennart Poettering
2014-03-05systemd-run: add new --property= switch that can set arbitrary properties ↵Lennart Poettering
for the unit that is created The code for parsing these properties is shared with "systemctl set-property", which means all the resource control settings are immediately available.
2014-02-20api: in constructor function calls, always put the returned object pointer ↵Lennart Poettering
first (or second) Previously the returned object of constructor functions where sometimes returned as last, sometimes as first and sometimes as second parameter. Let's clean this up a bit. Here are the new rules: 1. The object the new object is derived from is put first, if there is any 2. The object we are creating will be returned in the next arguments 3. This is followed by any additional arguments Rationale: For functions that operate on an object we always put that object first. Constructors should probably not be too different in this regard. Also, if the additional parameters might want to use varargs which suggests to put them last. Note that this new scheme only applies to constructor functions, not to all other functions. We do give a lot of freedom for those. Note that this commit only changes the order of the new functions we added, for old ones we accept the wrong order and leave it like that.
2014-02-06nspawn: add --quiet switch for turning off any output noiseLennart Poettering
2014-02-05core: allow User=, Group=, Nice=, Environment=, Type= to be passed when ↵Lennart Poettering
creating a transient service
2014-01-31run: drop mistakenly committed test codeLennart Poettering