| Age | Commit message (Collapse) | Author |
|---|
|
In 110ceee58e5bc796c03a7db2109f85a999d5bc2e we removed the period after
printing the started units. This makes copying the unit name easier but
results in improper English.
This adds a colon before printing the units, which makes the output
look better.
|
|
If you start a unit with systemd-run you usually need its name to
inspect it or stop it. Removing the period makes copying the unit name
easier.
|
|
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
Make sure we can properly process resource limit properties. Specifically, allow transient configuration of both the
soft and hard limit, the same way from the unit files. Previously, only the the hard rlimits could be configured but
they'd implicitly spill into the soft hard rlimits.
This also updates the client-side code to be able to parse hard/soft resource limit specifications. Since we need to
serialize two properties in bus_append_unit_property_assignment() now, the marshalling of the container around it is
now moved into the function itself. This has the benefit of shortening the calling code.
As a side effect this now beefs up the rlimit parser of "systemctl set-property" to understand time and disk sizes
where that's appropriate.
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
|
|
ID, fallback to random
Previously we used the process ID to generate transient unit names.
However, that is problematic as PIDs get reused easily, and applying
them to remote systems makes little sense.
Fortunately, each bus peer gets a unique, non-reusable ID assigned when
attaching to a bus, hence let's use that, if we can. In some cases we
cannot however, because we connect directly to PID's private socket, and
thus are not a proper bus peer with a unique ID. In that case generate a
random UUID to name the unit after.
|
|
Sort the includes accoding to the new coding style.
|
|
|
|
|
|
|
|
Fixes: #1672
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
Modernize the code a bit:
- Get rid of FOREACH_WORD_SEPARATOR() loop in favour of a
extract_first_word() loop.
- Remove find_binary()'s "local" flag. It's not reasonably possible to
look for binaries on remote systems, we hence should not pretend we
could.
- When we cannot find a suitable binary, return the last error returned
from access() rather than ENOENT unconditionally.
- Rework fsck_exists() and mkfs_exists() to return 1 on success, 0 if
the implementation is missing and negative on real errors. This is
more like we do it in other functions.
- Make sure we also detect direct fsck symlinks to "true", rather than
just absolute ones to /bin/true.
|
|
Including a fix for properly freeing a calendarspec object after use.
|
|
|
|
Previously, we'd allocate the TTY, spawn a service on it, but
immediately start processing the TTY and forwarding it to whatever the
commnd was started on. This is however problematic, as the TTY might get
actually opened only much later by the service. We'll hence first get
EIOs on the master as the other side is still closed, and hence
considered it hung up and terminated the session.
With this change we add a flag to the pty forwarding logic:
PTY_FORWARD_IGNORE_INITIAL_VHANGUP. If set, we'll ignore all hangups
(i.e. EIOs) on the master PTY until the first byte is successfully read.
From that point on we consider a hangup/EIO a regular connection termination. This
way, we handle the race: when we get EIO initially we'll ignore it,
until the connection is properly set up, at which time we start
honouring it.
|
|
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus,
while sd_bus_default_xyz() family tries to reuse the thread's default
bus. bus_open_transport() sometimes internally uses the former,
sometimes the latter family, but suggests it only calls the former via
its name. Hence, let's avoid this confusion, and generically rename the
call to bus_connect_transport().
Similar for all related calls.
And while we are at it, also change cgls + cgtop to do direct systemd
connections where possible, since all they do is talk to systemd itself.
|
|
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
|
|
It makes assumptions about the pty path, hence better call it in the
container namespace rather than the host.
|
|
|
|
Use free_and_strdup() where appropriate and replace equivalent,
open-coded versions.
|
|
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush()
(which writes all unwritten messages out) + sd_bus_close() (which
terminates the connection, releasing all unread messages) +
sd_bus_unref() (which frees the connection).
The combination of this call is used pretty frequently in systemd tools
right before exiting, and should also be relevant for most external
clients, and is hence useful to cover in a call of its own.
Previously the combination of the three calls was already done in the
_cleanup_bus_close_unref_ macro, but this was only available internally.
Also see #327
|
|
This ports a lot of manual code over to sigprocmask_many() and friends.
Also, we now consistly check for sigprocmask() failures with
assert_se(), since the call cannot realistically fail unless there's a
programming error.
Also encloses a few sd_event_add_signal() calls with (void) when we
ignore the return values for it knowingly.
|
|
Follow up for 7c918141ed.
|
|
No functional changes.
|
|
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
|
|
Make this blocking behaviour optional with --no-block, similar to
systemctl's switch of this name.
|
|
Otherwise it might happen that by the time PID 1 adds our process to the
scope unit the process might already have died, if the process is
short-running (such as an invocation to /bin/true).
https://bugs.freedesktop.org/show_bug.cgi?id=86520
|
|
|
|
Previously we always invoked the container PID 1 on /dev/console of the
container. With this change we do so only if nspawn was invoked
interactively (i.e. its stdin/stdout was connected to a TTY). In all other
cases we directly pass through the fds unmodified.
This has the benefit that nspawn can be added into shell pipelines.
https://bugs.freedesktop.org/show_bug.cgi?id=87732
|
|
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
|
|
machine it is connected to dies
|
|
|
|
Pretty much everywhere else we use the generic term "machine" when
referring to containers in API, so let's do though in sd-bus too. In
particular, since the concept of a "container" exists in sd-bus too, but
as part of the marshalling system.
|
|
For that, ask machined for a container PTY and use that.
|
|
|
|
|
|
Support timer options --on-active=, --on-boot=, --on-startup=,
--on-unit-active=, --on-unit-inactive=, --on-calendar=. Each options
corresponding with OnActiveSec=, OnBootSec=, OnStartupSec=,
OnUnitActiveSec=, OnUnitInactiveSec=, OnCalendar= of timer
respectively. And OnCalendar= and WakeSystem= supported by
--timer-property= option like --property= of systemd-run.
And if --unit= option and timer options are specified the command can
be omitted. In this case, systemd-run assumes the target service is
already loaded. And just try to generate transient timer unit only.
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
|
Basically:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \
$f; done
Plus manual indentation fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
systemd-run would fail when run with -M or -H and an absolute path,
if this path did not exists locally. Allow it to continue, since we
don't have a nice way of checking if the binary exists remotely.
The case where -M or -H is used and a local path is unchanged, and we
still iterate over $PATH to find the binary. We need to convert to an
absolute path, and we don't have a nice mechanism to check remotely,
so we assume that the binary will be located in the same place locally
and remotely.
http://lists.freedesktop.org/archives/systemd-devel/2014-November/025418.html
|
|
Since b5eca3a2059f9399d1dc52cbcf9698674c4b1cf0 we don't attempt to GC
busses anymore when unsent messages remain that keep their reference,
when they otherwise are not referenced anymore. This means that if we
explicitly want connections to go away, we need to close them.
With this change we will no do so explicitly wherver we connect to the
bus from a main program (and thus know when the bus connection should go
away), or when we create a private bus connection, that really should go
away after our use.
This fixes connection leaks in the NSS and PAM modules.
|
