| Age | Commit message (Collapse) | Author |
|---|
|
Pretty much everywhere else we use the generic term "machine" when
referring to containers in API, so let's do though in sd-bus too. In
particular, since the concept of a "container" exists in sd-bus too, but
as part of the marshalling system.
|
|
For that, ask machined for a container PTY and use that.
|
|
|
|
|
|
Support timer options --on-active=, --on-boot=, --on-startup=,
--on-unit-active=, --on-unit-inactive=, --on-calendar=. Each options
corresponding with OnActiveSec=, OnBootSec=, OnStartupSec=,
OnUnitActiveSec=, OnUnitInactiveSec=, OnCalendar= of timer
respectively. And OnCalendar= and WakeSystem= supported by
--timer-property= option like --property= of systemd-run.
And if --unit= option and timer options are specified the command can
be omitted. In this case, systemd-run assumes the target service is
already loaded. And just try to generate transient timer unit only.
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
|
Basically:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \
$f; done
Plus manual indentation fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
systemd-run would fail when run with -M or -H and an absolute path,
if this path did not exists locally. Allow it to continue, since we
don't have a nice way of checking if the binary exists remotely.
The case where -M or -H is used and a local path is unchanged, and we
still iterate over $PATH to find the binary. We need to convert to an
absolute path, and we don't have a nice mechanism to check remotely,
so we assume that the binary will be located in the same place locally
and remotely.
http://lists.freedesktop.org/archives/systemd-devel/2014-November/025418.html
|
|
Since b5eca3a2059f9399d1dc52cbcf9698674c4b1cf0 we don't attempt to GC
busses anymore when unsent messages remain that keep their reference,
when they otherwise are not referenced anymore. This means that if we
explicitly want connections to go away, we need to close them.
With this change we will no do so explicitly wherver we connect to the
bus from a main program (and thus know when the bus connection should go
away), or when we create a private bus connection, that really should go
away after our use.
This fixes connection leaks in the NSS and PAM modules.
|
|
getopt is usually good at printing out a nice error message when
commandline options are invalid. It distinguishes between an unknown
option and a known option with a missing arg. It is better to let it
do its job and not use opterr=0 unless we actually want to suppress
messages. So remove opterr=0 in the few places where it wasn't really
useful.
When an error in options is encountered, we should not print a lengthy
help() and overwhelm the user, when we know precisely what is wrong
with the commandline. In addition, since help() prints to stdout, it
should not be used except when requested with -h or --help.
Also, simplify things here and there.
|
|
There is a small number of the places in sources where we don't check
asprintf() return code and assume that after error the function
returns NULL pointer via the first argument. That's wrong, after
error the content of pointer is undefined.
|
|
Both systemd-analyze and systemd-run only access org.freedesktop.systemd1
on the bus. This patch allows using systemd-run --user and systemd-analyze
--user even if the user session's bus is not properly integrated with the
systemd user unit.
https://bugs.freedesktop.org/show_bug.cgi?id=79252 and other reports...
|
|
No functional change expected :)
|
|
|
|
--scope mode
|
|
|
|
for the unit that is created
The code for parsing these properties is shared with "systemctl
set-property", which means all the resource control settings are
immediately available.
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
|
|
creating a transient service
|
|
|
|
By specifiy a Controller property when creating the scope a client can
specify a bus name that will be notified with a RequestStop bus signal
when the scope has been asked to shut down, instead of sending SIGTERM
to the scope processes themselves.
https://bugzilla.redhat.com/show_bug.cgi?id=1032695
|
|
Suggested-by: Russ Allbery <rra@debian.org>
|
|
|
|
|
|
The call is one of the most important ones we expose, where we place
major emphasis on. We should make sure to give it a short, memorable
name.
|
|
|
|
|
|
Among other things this makes sure we always expose a --version command
and show it in the help texts.
|
|
|
|
Also, unify the transport logic a bit, since we reuse the same scheme in
many of our client tools.
|
|
Among other things this also adds a few things necessary for the change:
- Considerably more powerful error returning APIs in libsystemd-bus
- Adapter for connecting an sd_bus to an sd_event
- As I reworked the PolicyKit logic to the new library I also made it
asynchronous, so that PolicyKit requests of one user cannot block out
another user anymore.
- We always use the macro names for common bus error. That way it is
harder to mistype them since the compiler will notice
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Scope" units are very much like service units, however with the
difference that they are created from pre-existing processes, rather
than processes that systemd itself forks off. This means they are
generated programmatically via the bus API as transient units rather
than from static configuration read from disk. Also, they do not provide
execution-time parameters, as at the time systemd adds the processes to
the scope unit they already exist and the parameters cannot be applied
anymore.
The primary benefit of this new unit type is to create arbitrary cgroups
for worker-processes forked off an existing service.
This commit also adds a a new mode to "systemd-run" to run the specified
processes in a scope rather then a transient service.
|
|
Transient units can be created via the bus API. They are configured via
the method call parameters rather than on-disk files. They are subject
to normal GC. Transient units currently may only be created for
services (however, we will extend this), and currently only ExecStart=
and the cgroup parameters can be configured (also to be extended).
Transient units require a unique name, that previously had no
configuration file on disk.
A tool systemd-run is added that makes use of this functionality to run
arbitrary command lines as transient services:
$ systemd-run /bin/ping www.heise.de
Will cause systemd to create a new transient service and run ping in it.
|
