summaryrefslogtreecommitdiff
path: root/src/shared/bus-util.c
AgeCommit message (Collapse)Author
2016-04-22shared: move unit-specific code from bus-util.h to bus-unit-util.hLennart Poettering
Previously we'd have generally useful sd-bus utilities in bust-util.h, intermixed with code that is specifically for writing clients for PID 1, wrapping job and unit handling. Let's split the latter out and move it into bus-unit-util.c, to make the sources a bit short and easier to grok.
2016-04-19shared/install,systemctl,core: report offending file on installation errorZbigniew Jędrzejewski-Szmek
Fixes #2191: $ systemctl --root=/ enable sddm Created symlink /etc/systemd/system/display-manager.service, pointing to /usr/lib/systemd/system/sddm.service. $ sudo build/systemctl --root=/ enable gdm Failed to enable unit, file /etc/systemd/system/display-manager.service already exists and is a symlink to /usr/lib/systemd/system/sddm.service. $ sudo build/systemctl --root= enable sddm $ sudo build/systemctl --root= enable gdm Failed to enable unit: File /etc/systemd/system/display-manager.service already exists and is a symlink to /usr/lib/systemd/system/sddm.service. (I tried a few different approaches to pass the error information back to the caller. Adding a new parameter to hold the error results in a gigantic patch and a lot of hassle to pass the args arounds. Adding this information to the changes array is straightforward and can be more easily extended in the future.) In case local installation is performed, the full set of errors can be reported and we do that. When running over dbus, only the first error is reported.
2016-04-16systemctl/core: ignore masked units in preset-allZbigniew Jędrzejewski-Szmek
With any masked unit that would that would be enabled by presets, we'd get: test@rawhide $ sudo systemctl preset-all Failed to execute operation: Unit file is masked. test@rawhide $ sudo systemctl --root=/ preset-all Operation failed: Cannot send after transport endpoint shutdown Simply ignore those units: test@rawhide $ sudo systemctl preset-all Unit xxx.service is masked, ignoring.
2016-04-13tree-wide: remove useless NULLs from strjoinaZbigniew Jędrzejewski-Szmek
The coccinelle patch didn't work in some places, I have no idea why.
2016-04-06Merge pull request #2962 from keszybz/value-optionLennart Poettering
Add `--value` option to systemctl and loginctl to only print values
2016-04-05machinectl: add --value optionZbigniew Jędrzejewski-Szmek
2016-04-04systemctl: add --value optionZbigniew Jędrzejewski-Szmek
With this option, systemctl will only print the rhs in show: $ systemctl show -p Wants,After systemd-journald --value systemd-journald.socket ... systemd-journald-dev-log.socket ... This is useful in scripts, because the need to call awk or similar is removed.
2016-04-01bus-util: Fix reading uint32 propertiesMartin Pitt
Fix copy&paste bug in map_basic() to use the correct data type for SD_BUS_TYPE_UINT32. Before we were copying the wrong 32 bits into the destination pointer, resulting in complete garbage on big-endian systems. Fixes #2927
2016-03-29shared: fix a misspelling of "journalctl"Biao Lu
2016-02-23tree-wide: minor formatting inconsistency cleanupsVito Caputo
2016-02-22tree-wide: make ++/-- usage consistent WRT spacingVito Caputo
Throughout the tree there's spurious use of spaces separating ++ and -- operators from their respective operands. Make ++ and -- operator consistent with the majority of existing uses; discard the spaces.
2016-02-15systemctl: fix style to avoid modification of array passed by callerZbigniew Jędrzejewski-Szmek
Followup for 4524439edb7d.
2016-02-15systemctl: include -M or -H arguments in the hintZbigniew Jędrzejewski-Szmek
https://github.com/systemd/systemd/issues/2431 Some newlines are added, but the output will still exceed 80 columns in many cases. The fallback for oom conditions is changed from "n/a" to something "<service>", and a similar pattern is used for the new code. This way we have a realistic fallback for oom, which seems nicer than making the whole function return an error code which would then have to be propagated. $ systemctl -M fedora-rawhide restart systemd-networkd.service Job for systemd-networkd.service failed because start of the service was attempted too often. See "systemctl -M fedora-rawhide status systemd-networkd.service" and "journalctl -M fedora-rawhide -xe" for details. To force a start use "systemctl -M fedora-rawhide reset-failed systemd-networkd.service" followed by "systemctl -M fedora-rawhide start systemd-networkd.service" again.
2016-02-10tree-wide: remove Emacs lines from all filesDaniel Mack
This should be handled fine now by .dir-locals.el, so need to carry that stuff in every file.
2016-02-01core: rework unit timeout handling, and add new setting RuntimeMaxSec=Lennart Poettering
This clean-ups timeout handling in PID 1. Specifically, instead of storing 0 in internal timeout variables as indication for a disabled timeout, use USEC_INFINITY which is in-line with how we do this in the rest of our code (following the logic that 0 means "no", and USEC_INFINITY means "never"). This also replace all usec_t additions with invocations to usec_add(), so that USEC_INFINITY is properly propagated, and sd-event considers it has indication for turning off the event source. This also alters the deserialization of the units to restart timeouts from the time they were originally started from. Before this patch timeouts would be restarted beginning with the time of the deserialization, which could lead to artificially prolonged timeouts if a daemon reload took place. Finally, a new RuntimeMaxSec= setting is introduced for service units, that specifies a maximum runtime after which a specific service is forcibly terminated. This is useful to put time limits on time-intensive processing jobs. This also simplifies the various xyz_spawn() calls of the various types in that explicit distruction of the timers is removed, as that is done anyway by the state change handlers, and a state change is always done when the xyz_spawn() calls fail. Fixes: #2249
2016-02-01core: fix support for transient resource limit propertiesLennart Poettering
Make sure we can properly process resource limit properties. Specifically, allow transient configuration of both the soft and hard limit, the same way from the unit files. Previously, only the the hard rlimits could be configured but they'd implicitly spill into the soft hard rlimits. This also updates the client-side code to be able to parse hard/soft resource limit specifications. Since we need to serialize two properties in bus_append_unit_property_assignment() now, the marshalling of the container around it is now moved into the function itself. This has the benefit of shortening the calling code. As a side effect this now beefs up the rlimit parser of "systemctl set-property" to understand time and disk sizes where that's appropriate.
2016-02-01shared: simplify parsing of bus properties a bitLennart Poettering
Let's write the property name and value in one call, when that's possible, shorthing our code a bit.
2016-02-01core: fix handling of AccuracyUSec and RandomDelayUSec bus propertiesLennart Poettering
Clear up some confusion regarding the USec and Sec suffixes we use. In configuration files we usually use the Sec suffix, to indicate the implied time unit if none is specified. The respective bus properties however use the USec property, since they expose 64bit unsigned integers containing time in µs. Before this patch timer units exposed a bus property AccuracyUSec (which hence is the correct name) but when parsing transient property data would look for AccuracySec instead (which is incorrect). This patch ensures we look for AccuracySec correctly, but keeps the code for AccuracyUSec in place for compatibility, but adds a warning to ensure that apps are updated to use the right property.
2016-01-28systemctl: improve message when a job fails with a JOB_INVALID stateLennart Poettering
This result can only happen if the job was a reload job for an inactive unit. Make the error message actually say that.
2016-01-14bus-util: print "systemctl --user" on user service managerWaLyong Cho
When a unit was started with "systemctl --user" and it failed, error messages is printed as "systemctl status". But it should be "systemctl --user status".
2015-12-10Merge pull request #2056 from evverx/expose-soft-limits-on-the-busLennart Poettering
Expose soft limits on the bus
2015-12-06shared: include what we useThomas Hindoe Paaboel Andersen
The next step of a general cleanup of our includes. This one mostly adds missing includes but there are a few removals as well.
2015-11-30core: expose soft limits on the busEvgeny Vereshchagin
This is a follow-up for https://github.com/systemd/systemd/pull/1994 See https://github.com/systemd/systemd/pull/1994#issuecomment-160087219
2015-11-27tree-wide: expose "p"-suffix unref calls in public APIs to make gcc cleanup easyLennart Poettering
GLIB has recently started to officially support the gcc cleanup attribute in its public API, hence let's do the same for our APIs. With this patch we'll define an xyz_unrefp() call for each public xyz_unref() call, to make it easy to use inside a __attribute__((cleanup())) expression. Then, all code is ported over to make use of this. The new calls are also documented in the man pages, with examples how to use them (well, I only added docs where the _unref() call itself already had docs, and the examples, only cover sd_bus_unrefp() and sd_event_unrefp()). This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we tend to call our destructors these days. Note that this defines no public macro that wraps gcc's attribute and makes it easier to use. While I think it's our duty in the library to make our stuff easy to use, I figure it's not our duty to make gcc's own features easy to use on its own. Most likely, client code which wants to make use of this should define its own: #define _cleanup_(function) __attribute__((cleanup(function))) Or similar, to make the gcc feature easier to use. Making this logic public has the benefit that we can remove three header files whose only purpose was to define these functions internally. See #2008.
2015-11-26core: rename Random* to RandomizedDelay*Zbigniew Jędrzejewski-Szmek
The name RandomSec is too generic: "Sec" just specifies the default unit type, and "Random" by itself is not enough. Rename to something that should give the user general idea what the setting does without looking at documentation.
2015-11-18core: add new RandomSec= setting for time unitsLennart Poettering
This allows configuration of a random time on top of the elapse events, in order to spread time events in a network evenly across a range.
2015-11-18bus-util: make sure --property=RemainAfterElapse=1 worksLennart Poettering
2015-11-18bus-util: add in forgotten error messagesLennart Poettering
2015-11-11execute: Add new PassEnvironment= directiveFilipe Brandenburger
This directive allows passing environment variables from the system manager to spawned services. Variables in the system manager can be set inside a container by passing `--set-env=...` options to systemd-spawn. Tested with an on-disk test.service unit. Tested using multiple variable names on a single line, with an empty setting to clear the current list of variables, with non-existing variables. Tested using `systemd-run -p PassEnvironment=VARNAME` to confirm it works with transient units. Confirmed that `systemctl show` will display the PassEnvironment settings. Checked that man pages are generated correctly. No regressions in `make check`.
2015-11-02Merge pull request #1690 from evverx/run-runtime-directoryLennart Poettering
systemd-run can launch units with RuntimeDirectory
2015-11-02Teach bus_append_unit_property_assignment() about 'Delegate' propertyFranck Bui
2015-10-27process-util: move a couple of process-related calls overLennart Poettering
2015-10-27util-lib: split out allocation calls into alloc-util.[ch]Lennart Poettering
2015-10-27util-lib: split out printf() helpers to stdio-util.hLennart Poettering
2015-10-27user-util: move UID/GID related macros from macro.h to user-util.hLennart Poettering
2015-10-27util-lib: split out syslog-related calls into syslog-util.[ch]Lennart Poettering
2015-10-27util-lib: move /proc/cmdline parsing code to proc-cmdline.[ch]Lennart Poettering
2015-10-27util-lib: split out resource limits related calls into rlimit-util.[ch]Lennart Poettering
2015-10-27util-lib: split string parsing related calls from util.[ch] into parse-util.[ch]Lennart Poettering
2015-10-27run: can launch units with RuntimeDirectoryEvgeny Vereshchagin
2015-10-26run: can launch units with ProtectHomeEvgeny Vereshchagin
2015-10-25Merge pull request #1654 from poettering/util-libTom Gundersen
Various changes to src/basic/
2015-10-25util-lib: split out fd-related operations into fd-util.[ch]Lennart Poettering
There are more than enough to deserve their own .c file, hence move them over.
2015-10-24run: can launch units with ProtectSystemEvgeny Vereshchagin
2015-10-24util-lib: split our string related calls from util.[ch] into its own file ↵Lennart Poettering
string-util.[ch] There are more than enough calls doing string manipulations to deserve its own files, hence do something about it. This patch also sorts the #include blocks of all files that needed to be updated, according to the sorting suggestions from CODING_STYLE. Since pretty much every file needs our string manipulation functions this effectively means that most files have sorted #include blocks now. Also touches a few unrelated include files.
2015-10-24util: split out escaping code into escape.[ch]Lennart Poettering
This really deserves its own file, given how much code this is now.
2015-10-20run: can launch units with ReadWriteDirectories, ReadOnlyDirectories, ↵Evgeny Vereshchagin
InaccessibleDirectories
2015-10-20run: fix Environment parsingEvgeny Vereshchagin
* `Environment=` resets previous assignments * `Environment='a=1 b=2'` sets `a` to `1` and `b` to `2` * `Environment='"a=1 2" b=2"'` sets `a` to `1 2` and `b` to `2`
2015-10-19Hook more properties for transient unitsNicolas Cornu
systemd-run can now launch units with EnvironmentFile set.
2015-10-17run: can launch units with OOMScoreAdjustEvgeny Vereshchagin