| Age | Commit message (Collapse) | Author |
|---|
|
This allows us to get rid of the dep on libsystemd-label for cgroup
management.
https://bugs.freedesktop.org/show_bug.cgi?id=69966
|
|
|
|
Syntactic sugar in a macro PATH_FOREACH_PREFIX.
|
|
controllers
Previously we did operations like attach, trim or migrate only on the
controllers that were enabled for a specific unit. With this changes we
will now do them for all supproted controllers, and fall back to all
possible prefix paths if the specified paths do not exist.
This fixes issues if a controller is being disabled for a unit where it
was previously enabled, and makes sure that all processes stay as "far
down" the tree as groups exist.
|
|
Only ASCII letters and digits are allowed.
|
|
Previously for an instantiated unit foo@bar.service we created a cgroup
foo@.service/foo@bar.service, in order to place all instances of the
same template inside the same subtree. As we now implicitly add all
instantiated units into one per-template slice we don't need this
complexity anymore, and instance units can map directly to the cgroups
of their full name.
|
|
|
|
During shutdown, when we try to clean up all remaining processes, the
kernel will fork new agents every time a cgroup runs empty. These
new processes cause delays in the final SIGTERM, SIGKILL logic.
Apart from that, this should also avoid that the kernel-forked binaries
cause unpredictably timed access to the filesystem which we might need to
unmount.
|
|
|
|
"Scope" units are very much like service units, however with the
difference that they are created from pre-existing processes, rather
than processes that systemd itself forks off. This means they are
generated programmatically via the bus API as transient units rather
than from static configuration read from disk. Also, they do not provide
execution-time parameters, as at the time systemd adds the processes to
the scope unit they already exist and the parameters cannot be applied
anymore.
The primary benefit of this new unit type is to create arbitrary cgroups
for worker-processes forked off an existing service.
This commit also adds a a new mode to "systemd-run" to run the specified
processes in a scope rather then a transient service.
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
|
|
|
- This changes all logind cgroup objects to use slice objects rather
than fixed croup locations.
- logind can now collect minimal information about running
VMs/containers. As fixed cgroup locations can no longer be used we
need an entity that keeps track of machine cgroups in whatever slice
they might be located. Since logind already keeps track of users,
sessions and seats this is a trivial addition.
- nspawn will now register with logind and pass various bits of metadata
along. A new option "--slice=" has been added to place the container
in a specific slice.
- loginctl gained commands to list, introspect and terminate machines.
- user.slice and machine.slice will now be pulled in by logind.service,
since only logind.service requires this slice.
|
|
In order to prepare for the kernel cgroup rework, let's introduce a new
unit type to systemd, the "slice". Slices can be arranged in a tree and
are useful to partition resources freely and hierarchally by the user.
Each service unit can now be assigned to one of these slices, and later
on login users and machines may too.
Slices translate pretty directly to the cgroup hierarchy, and the
various objects can be assigned to any of the slices in the tree.
|
|
|
|
with a dot
|
|
I'm assuming that it's fine if a _const_ or _pure_ function
calls assert. It is assumed that the assert won't trigger,
and even if it does, it can only trigger on the first call
with a given set of parameters, and we don't care if the
compiler moves the order of calls.
|
|
cg_get_machine_path is modified to include the escaped machine name
+ ".nspawn" if the machine argument is nonnull.
|
|
normalized named hierarchies
|
|
systemd:/system subtree
|
|
clang emits warnings about unused attribute _saved_errno_, which drown
out other—potentially useful—warnings. gcc documentation is not exactly
verbose about the effects of __attribute__((unused)) on variables, but
let's assume that it works if the unit test passes.
|
|
Let's better be safe than sorry.
|
|
Session objects will now get the .session suffix, user objects the .user
suffix, nspawn containers the .nspawn suffix.
This also changes the user cgroups to be named after the numeric UID
rather than the username, since this allows us the parse these paths
standalone without requiring access to the cgroup file system.
This also changes the mapping of instanced units to cgroups. Instead of
mapping foo@bar.service to the cgroup path /user/foo@.service/bar we
will now map it to /user/foo@.service/foo@bar.service, in order to
ensure that all our objects are properly suffixed in the tree.
|
|
As discussed with Dan Berrange it's a good idea to suffix all objects in
the cgroup tree with ".something", so that when the system is
partitioned using a resource management tool we can drop objects of
different types into the same partition directory without generate
namespace conflicts.
We'l add this to the Pax Control Group document as soon as write access
to the fdo wiki is restored.
|
|
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
|
|
containers there
Containers will now carry a label (normally derived from the root
directory name, but configurable by the user), and the container's root
cgroup is /machine/<label>. This label is called "machine name", and can
cover both containers and VMs (as soon as libvirt also makes use of
/machine/).
libsystemd-login can be used to query the machine name from a process.
This patch also includes numerous clean-ups for the cgroup code.
|
|
Make sure that our library is safe for usage in SUID programs when it
comes to env var handling
|
|
|
|
cgroup directories in sync
|
|
You can write much more than just one line with this call (and we
frequently do), so let's correct the naming.
|
|
Also split out some fileio functions to fileio.c and provide a SELinux
aware pendant in fileio-label.c
see https://bugzilla.redhat.com/show_bug.cgi?id=881577
|
|
|
|
|
|
|
|
|
|
|
|
during runtime
|
|
|
|
This is to match strappend() and the other string related functions.
|
|
|
|
|
|
|
|
|
|
|
|
In some cases the main/control PID of a service can be outside of the
services cgroups (for example, if logind readjusts the processes'
cgroup). In order to clarify this for the user show the main/control PID
in the cgroup tree nonetheless, but mark them specially.
|
|
|
|
hierarchy
|
|
We finally got the OK from all contributors with non-trivial commits to
relicense systemd from GPL2+ to LGPL2.1+.
Some udev bits continue to be GPL2+ for now, but we are looking into
relicensing them too, to allow free copy/paste of all code within
systemd.
The bits that used to be MIT continue to be MIT.
The big benefit of the relicensing is that closed source code may now
link against libsystemd-login.so and friends.
|
|
This prevents linking of selinux and libdl for another 15 binaries.
|
|
Only 34 of 74 tools need libselinux linked, and libselinux is a pain
with its unconditional library constructor.
|
