summaryrefslogtreecommitdiff
path: root/src/shared/conf-parser.c
AgeCommit message (Collapse)Author
2014-05-26Do not unescape unit names in [Install] sectionMichal Sekletar
https://bugs.freedesktop.org/show_bug.cgi?id=49316
2014-05-22conf-parser: never consider it an error if we cannot load a drop-in file ↵Lennart Poettering
because it is missing After all, we want to be able to boot with /etc empty one day...
2014-05-17conf-parser: silently ignore sections starting with "X-"Michael Marineau
This allows external tools to keep additional unit information in a separate section without scaring users with a big warning.
2014-03-04Do not print invalid UTF-8 in error messagesZbigniew Jędrzejewski-Szmek
Inexplicably, 550a40ec ('core: do not print invalid utf-8 in error messages') only fixed two paths. Convert all of them now.
2014-03-04Introduce strv_consume which takes ownershipZbigniew Jędrzejewski-Szmek
This mirrors set_consume and makes the common use a bit nicer.
2014-03-03conf-parser: minor optimization in config_parse_string()Lennart Poettering
2014-03-03conf-parser: drop special casing in config_parse_path()Lennart Poettering
The code checked for two lvalues that aren't even using config_parse_path(), so let's drop these checks and make the function completely generic again.
2014-03-03conf-parser: config_parse_path_strv() is not generic, so let's move it into ↵Lennart Poettering
load-fragment.c The parse code actually checked for specific lvalue names, which is really wrong for supposedly generic parsers...
2014-03-03core: move config_parse_set_status() into load-fragment.cLennart Poettering
Let's keep specific config parsers close to where they are needed. Only the really generic ones should be defined in conf-parser.[ch].
2014-03-03core: move ShowStatus type into the coreLennart Poettering
Let's make the scope of the show-status stuff a bit smaller, and make it private to the core, rather than shared API in shared/.
2014-03-03conf-parse: rename config_parse_level() to config_parse_log_level()Lennart Poettering
"level" is a bit too generic, let's clarify what kind of level we are referring to here.
2014-02-23core: clean up some confusing regarding SI decimal and IEC binary suffixes ↵Lennart Poettering
for sizes According to Wikipedia it is customary to specify hardware metrics and transfer speeds to the basis 1000 (SI decimal), while software metrics and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary). So far we specified everything in IEC, let's fix that and be more true to what's otherwise customary. Since we don't want to parse "Mi" instead of "M" we document each time what the context used is.
2014-02-21man: don't document ".include" in configuration files anymore as first step ↵Lennart Poettering
to deprecate them one day
2014-02-03conf-parser: warn when we open configuration files with weird access bitsLennart Poettering
2014-01-27manager: add systemd.show_status=auto modeZbigniew Jędrzejewski-Szmek
When set to auto, status will shown when the first ephemeral message is shown (a job has been running for five seconds). Then until the boot or shutdown ends, status messages will be shown. No indication about the switch is done: I think it should be clear for the user that first the cylon eye and the ephemeral messages appear, and afterwards messages are displayed. The initial arming of the event source was still wrong, but now should really be fixed.
2013-11-25conf-parser: distinguish between multiple sections with the same nameTom Gundersen
Pass on the line on which a section was decleared to the parsers, so they can distinguish between multiple sections (if they chose to). Currently no parsers take advantage of this, but a follow-up patch will do that to distinguish [Address] Address=192.168.0.1/24 Label=one [Address] Address=192.168.0.2/24 Label=two from [Address] Address=192.168.0.1/24 Label=one Address=192.168.0.2/24 Label=two
2013-11-20conf-parser: don't leak section namesTom Gundersen
If we encounter an unknown section, we must free the previous section before clearing the pointer.
2013-11-08Remove dead code and unexport some callsLennart Poettering
"make check-api-unused" informs us about code that is not used anymore or that is exported but only used internally. Fix these all over the place.
2013-10-29udev: link-config - add proper parsingTom Gundersen
2013-08-23"-" prefix for InaccessibleDirectories and ReadOnlyDirectoriesMaciej Wereski
2013-04-25conf-parser: restrict .include usageLennart Poettering
Disallow recursive .include, and make it unavailable in anything but unit files.
2013-04-18move _cleanup_ attribute in front of the typeHarald Hoyer
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
2013-04-17Report about syntax errors with metadataZbigniew Jędrzejewski-Szmek
The information about the unit for which files are being parsed is passed all the way down. This way messages land in the journal with proper UNIT=... or USER_UNIT=... attribution. 'systemctl status' and 'journalctl -u' not displaying those messages has been a source of confusion for users, since the journal entry for a misspelt setting was often logged quite a bit earlier than the failure to start a unit. Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
2013-04-17conf-parser: generate 7 parsing functions from a macroZbigniew Jędrzejewski-Szmek
Those functions were identical, apart from typos. Log message is modified to contain the type of destination var (int, double, ...). I think this might make it easier to understand why a value was rejected (e.g. a minus from an unsigned type).
2013-04-13fileio: in envfiles, do not skip lines following empty linesZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=63477
2013-04-05Use _cleanup_ when reading config filesZbigniew Jędrzejewski-Szmek
2013-04-03util: rename parse_usec() to parse_sec() sinds the default unit is secondsLennart Poettering
Internally we store all time values in usec_t, however parse_usec() actually was used mostly to parse values in seconds (unless explicit units were specified to define a different unit). Hence, be clear about this and name the function about what we pass into it, not what we get out of it.
2013-03-23conf-parser: when we parse a string list, always fill in somethingLennart Poettering
Some code really wants to know whether there was a string list parsed, so don't take the shortcut here, and always allocate a string list, even if it is an empty one. https://bugs.freedesktop.org/show_bug.cgi?id=62558
2013-02-14bootchart: use conf-parser & CamelCase names in .confThomas Hindoe Paaboel Andersen
2013-02-11core: properly validate environment data from Environment= lines in unit filesLennart Poettering
2013-01-17units: for all unit settings that take lists, allow the empty string for ↵Lennart Poettering
resetting the lists https://bugzilla.redhat.com/show_bug.cgi?id=756787
2012-10-30shared, libsystemd-daemon: check for empty strings in strto*l conversionsMichal Schmidt
strtol() and friends may set EINVAL if no conversion was performed, but they are not required to do so. In practice they don't. We need to check for it. https://bugzilla.redhat.com/show_bug.cgi?id=870577
2012-09-17conf-parser: don't unescape parsed configuration strings by defaultLennart Poettering
In many cases this might have a negative effect since we drop escaping from strings where we better shouldn't have dropped it. If unescaping makes sense for some settings we can readd it later again, on a per-case basis. https://bugs.freedesktop.org/show_bug.cgi?id=54522
2012-08-16conf-parser: make parsing exit status lists non-fatalLennart Poettering
2012-08-14conf-parser: simplify a few things by using set_ensure_allocated() rather ↵Lennart Poettering
than set_new()
2012-08-14service: add options RestartPreventExitStatus and SuccessExitStatusLukas Nykryn
In some cases, like wrong configuration, restarting after error does not help, so administrator can specify statuses by RestartPreventExitStatus which will not cause restart of a service. Sometimes you have non-standart exit status, so this can be specified by SuccessfulExitStatus.
2012-07-13util: rename join() to strjoin()Lennart Poettering
This is to match strappend() and the other string related functions.
2012-06-01journal: allow setting of a cutoff log level for disk storage, syslog, kmsg, ↵Lennart Poettering
console forwarding
2012-05-31util: introduce a proper nsec_t and make use of it where appropriateLennart Poettering
2012-05-08util: split-out path-util.[ch]Kay Sievers
2012-04-12relicense to LGPLv2.1 (with exceptions)Lennart Poettering
We finally got the OK from all contributors with non-trivial commits to relicense systemd from GPL2+ to LGPL2.1+. Some udev bits continue to be GPL2+ for now, but we are looking into relicensing them too, to allow free copy/paste of all code within systemd. The bits that used to be MIT continue to be MIT. The big benefit of the relicensing is that closed source code may now link against libsystemd-login.so and friends.
2012-04-10util: move all to shared/ and split external dependencies in separate ↵Kay Sievers
internal libraries Before: $ ldd /lib/systemd/systemd-timestamp linux-vdso.so.1 => (0x00007fffb05ff000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f90aac57000) libcap.so.2 => /lib64/libcap.so.2 (0x00007f90aaa53000) librt.so.1 => /lib64/librt.so.1 (0x00007f90aa84a000) libc.so.6 => /lib64/libc.so.6 (0x00007f90aa494000) /lib64/ld-linux-x86-64.so.2 (0x00007f90aae90000) libdl.so.2 => /lib64/libdl.so.2 (0x00007f90aa290000) libattr.so.1 => /lib64/libattr.so.1 (0x00007f90aa08a000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f90a9e6e000) After: $ ldd systemd-timestamp linux-vdso.so.1 => (0x00007fff3cbff000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f5eaa1c3000) librt.so.1 => /lib64/librt.so.1 (0x00007f5ea9fbb000) libc.so.6 => /lib64/libc.so.6 (0x00007f5ea9c04000) /lib64/ld-linux-x86-64.so.2 (0x00007f5eaa3fc000) libdl.so.2 => /lib64/libdl.so.2 (0x00007f5ea9a00000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f5ea97e4000)