summaryrefslogtreecommitdiff
path: root/src/shared/conf-parser.c
AgeCommit message (Collapse)Author
2015-08-31networkd: dhcp-server - allow configuration of the poolTom Gundersen
The constraints we place on the pool is that it is a contiguous sequence of addresses in the same subnet as the server address, not including the subnet nor broadcast addresses, but possibly including the server address itself. If the server address is included in the pool it is (obviously) reserved and not handed out to clients.
2015-07-31tree-wide: introduce mfree()David Herrmann
Pretty trivial helper which wraps free() but returns NULL, so we can simplify this: free(foobar); foobar = NULL; to this: foobar = mfree(foobar);
2015-05-30conf-parser: parsing error logs should show a type not a vartypeRonny Chevalier
Instead of this: [filename:1] Failed to parse nsec_t value, ignoring: garbage we show this: [filename:1] Failed to parse nsec value, ignoring: garbage
2015-04-21log: move log_syntax() into src/shared/log.c, and make it more similar to ↵Lennart Poettering
the other log functions
2015-04-10util: unify how we parse mode_t stringsLennart Poettering
2015-02-23remove unused includesThomas Hindoe Paaboel Andersen
This patch removes includes that are not used. The removals were found with include-what-you-use which checks if any of the symbols from a header is in use.
2015-01-13networkd: make IP forwarding for IPv4 and IPv6 individually configurableLennart Poettering
2015-01-07conf-parse: make syntax logging functions behave more like other log functonsLennart Poettering
In particular, don't patch the error number to EINVAL if 0, and don't negate it. (Also, add do {} while (false) around multi-line macro)
2014-11-28treewide: use log_*_errno whenever %m is in the format stringMichal Schmidt
If the format string contains %m, clearly errno must have a meaningful value, so we might as well use log_*_errno to have ERRNO= logged. Using: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/' Plus some whitespace, linewrap, and indent adjustments.
2014-11-28treewide: more log_*_errno() conversions, multiline callsMichal Schmidt
Basically: find . -name '*.[ch]' | while read f; do perl -i.mmm -e \ 'local $/; local $_=<>; s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \ $f; done Plus manual indentation fixups.
2014-11-28log: fix order of log_unit_struct() to match other logging callsLennart Poettering
Also, while we are at it, introduce some syntactic sugar for creating ERRNO= and MESSAGE= structured logging fields.
2014-11-27log: add an "error" parameter to all low-level logging calls and intrdouce ↵Lennart Poettering
log_error_errno() as log calls that take error numbers This change has two benefits: - The format string %m will now resolve to the specified error (or to errno if the specified error is 0. This allows getting rid of a ton of strerror() invocations, a function that is not thread-safe. - The specified error can be passed to the journal in the ERRNO= field. Now of course, we just need somebody to convert all cases of this: log_error("Something happened: %s", strerror(-r)); into thus: log_error_errno(-r, "Something happened: %m");
2014-11-26logind: Support logind.conf.d directories in the usual search pathsJosh Triplett
This makes it possible to drop in logind configuration snippets from a package or other configuration management mechanism. Add documentation to the header of /etc/logind.conf pointing the user at /etc/logind.conf.d/*.conf. Introduce a new helper, conf_parse_many, to parse configuration files in a search path.
2014-08-31config-parser: fix mem leakThomas Hindoe Paaboel Andersen
2014-07-31Properly report invalid quoted stringsZbigniew Jędrzejewski-Szmek
$ systemd-analyze verify trailing-g.service [./trailing-g.service:2] Trailing garbage, ignoring. trailing-g.service lacks ExecStart setting. Refusing. Error: org.freedesktop.systemd1.LoadFailed: Unit trailing-g.service failed to load: Invalid argument. Failed to create trailing-g.service/start: Invalid argument
2014-07-31Reject invalid quoted stringsZbigniew Jędrzejewski-Szmek
String which ended in an unfinished quote were accepted, potentially with bad memory accesses. Reject anything which ends in a unfished quote, or contains non-whitespace characters right after the closing quote. _FOREACH_WORD now returns the invalid character in *state. But this return value is not checked anywhere yet. Also, make 'word' and 'state' variables const pointers, and rename 'w' to 'word' in various places. Things are easier to read if the same name is used consistently. mbiebl_> am I correct that something like this doesn't work mbiebl_> ExecStart=/usr/bin/encfs --extpass='/bin/systemd-ask-passwd "Unlock EncFS"' mbiebl_> systemd seems to strip of the quotes mbiebl_> systemctl status shows mbiebl_> ExecStart=/usr/bin/encfs --extpass='/bin/systemd-ask-password Unlock EncFS $RootDir $MountPoint mbiebl_> which is pretty weird
2014-07-16Let config_parse open file where applicableZbigniew Jędrzejewski-Szmek
Special care is needed so that we get an error message if the file failed to parse, but not when it is missing. To avoid duplicating the same error check in every caller, add an additional 'warn' boolean to tell config_parse whether a message should be issued. This makes things both shorter and more robust wrt. to error reporting.
2014-07-15Constify ConfigTableItem tablesZbigniew Jędrzejewski-Szmek
2014-05-26Do not unescape unit names in [Install] sectionMichal Sekletar
https://bugs.freedesktop.org/show_bug.cgi?id=49316
2014-05-22conf-parser: never consider it an error if we cannot load a drop-in file ↵Lennart Poettering
because it is missing After all, we want to be able to boot with /etc empty one day...
2014-05-17conf-parser: silently ignore sections starting with "X-"Michael Marineau
This allows external tools to keep additional unit information in a separate section without scaring users with a big warning.
2014-03-04Do not print invalid UTF-8 in error messagesZbigniew Jędrzejewski-Szmek
Inexplicably, 550a40ec ('core: do not print invalid utf-8 in error messages') only fixed two paths. Convert all of them now.
2014-03-04Introduce strv_consume which takes ownershipZbigniew Jędrzejewski-Szmek
This mirrors set_consume and makes the common use a bit nicer.
2014-03-03conf-parser: minor optimization in config_parse_string()Lennart Poettering
2014-03-03conf-parser: drop special casing in config_parse_path()Lennart Poettering
The code checked for two lvalues that aren't even using config_parse_path(), so let's drop these checks and make the function completely generic again.
2014-03-03conf-parser: config_parse_path_strv() is not generic, so let's move it into ↵Lennart Poettering
load-fragment.c The parse code actually checked for specific lvalue names, which is really wrong for supposedly generic parsers...
2014-03-03core: move config_parse_set_status() into load-fragment.cLennart Poettering
Let's keep specific config parsers close to where they are needed. Only the really generic ones should be defined in conf-parser.[ch].
2014-03-03core: move ShowStatus type into the coreLennart Poettering
Let's make the scope of the show-status stuff a bit smaller, and make it private to the core, rather than shared API in shared/.
2014-03-03conf-parse: rename config_parse_level() to config_parse_log_level()Lennart Poettering
"level" is a bit too generic, let's clarify what kind of level we are referring to here.
2014-02-23core: clean up some confusing regarding SI decimal and IEC binary suffixes ↵Lennart Poettering
for sizes According to Wikipedia it is customary to specify hardware metrics and transfer speeds to the basis 1000 (SI decimal), while software metrics and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary). So far we specified everything in IEC, let's fix that and be more true to what's otherwise customary. Since we don't want to parse "Mi" instead of "M" we document each time what the context used is.
2014-02-21man: don't document ".include" in configuration files anymore as first step ↵Lennart Poettering
to deprecate them one day
2014-02-03conf-parser: warn when we open configuration files with weird access bitsLennart Poettering
2014-01-27manager: add systemd.show_status=auto modeZbigniew Jędrzejewski-Szmek
When set to auto, status will shown when the first ephemeral message is shown (a job has been running for five seconds). Then until the boot or shutdown ends, status messages will be shown. No indication about the switch is done: I think it should be clear for the user that first the cylon eye and the ephemeral messages appear, and afterwards messages are displayed. The initial arming of the event source was still wrong, but now should really be fixed.
2013-11-25conf-parser: distinguish between multiple sections with the same nameTom Gundersen
Pass on the line on which a section was decleared to the parsers, so they can distinguish between multiple sections (if they chose to). Currently no parsers take advantage of this, but a follow-up patch will do that to distinguish [Address] Address=192.168.0.1/24 Label=one [Address] Address=192.168.0.2/24 Label=two from [Address] Address=192.168.0.1/24 Label=one Address=192.168.0.2/24 Label=two
2013-11-20conf-parser: don't leak section namesTom Gundersen
If we encounter an unknown section, we must free the previous section before clearing the pointer.
2013-11-08Remove dead code and unexport some callsLennart Poettering
"make check-api-unused" informs us about code that is not used anymore or that is exported but only used internally. Fix these all over the place.
2013-10-29udev: link-config - add proper parsingTom Gundersen
2013-08-23"-" prefix for InaccessibleDirectories and ReadOnlyDirectoriesMaciej Wereski
2013-04-25conf-parser: restrict .include usageLennart Poettering
Disallow recursive .include, and make it unavailable in anything but unit files.
2013-04-18move _cleanup_ attribute in front of the typeHarald Hoyer
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
2013-04-17Report about syntax errors with metadataZbigniew Jędrzejewski-Szmek
The information about the unit for which files are being parsed is passed all the way down. This way messages land in the journal with proper UNIT=... or USER_UNIT=... attribution. 'systemctl status' and 'journalctl -u' not displaying those messages has been a source of confusion for users, since the journal entry for a misspelt setting was often logged quite a bit earlier than the failure to start a unit. Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
2013-04-17conf-parser: generate 7 parsing functions from a macroZbigniew Jędrzejewski-Szmek
Those functions were identical, apart from typos. Log message is modified to contain the type of destination var (int, double, ...). I think this might make it easier to understand why a value was rejected (e.g. a minus from an unsigned type).
2013-04-13fileio: in envfiles, do not skip lines following empty linesZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=63477
2013-04-05Use _cleanup_ when reading config filesZbigniew Jędrzejewski-Szmek
2013-04-03util: rename parse_usec() to parse_sec() sinds the default unit is secondsLennart Poettering
Internally we store all time values in usec_t, however parse_usec() actually was used mostly to parse values in seconds (unless explicit units were specified to define a different unit). Hence, be clear about this and name the function about what we pass into it, not what we get out of it.
2013-03-23conf-parser: when we parse a string list, always fill in somethingLennart Poettering
Some code really wants to know whether there was a string list parsed, so don't take the shortcut here, and always allocate a string list, even if it is an empty one. https://bugs.freedesktop.org/show_bug.cgi?id=62558
2013-02-14bootchart: use conf-parser & CamelCase names in .confThomas Hindoe Paaboel Andersen
2013-02-11core: properly validate environment data from Environment= lines in unit filesLennart Poettering
2013-01-17units: for all unit settings that take lists, allow the empty string for ↵Lennart Poettering
resetting the lists https://bugzilla.redhat.com/show_bug.cgi?id=756787
2012-10-30shared, libsystemd-daemon: check for empty strings in strto*l conversionsMichal Schmidt
strtol() and friends may set EINVAL if no conversion was performed, but they are not required to do so. In practice they don't. We need to check for it. https://bugzilla.redhat.com/show_bug.cgi?id=870577