summaryrefslogtreecommitdiff
path: root/src/shared/install.c
AgeCommit message (Collapse)Author
2014-06-20conf-files: include root in returned file pathsMichael Marineau
This restores the original root handling logic that was present prior to 112cfb18 when path expansion moved to path_strv_canonicalize_absolute. That behavior partially went away in 12ed81d9. Alternatively all users of conf_files_list* could be updated to concatenate the paths themselves as unit_file_query_preset did but since no user needs the un-concatenated form that is pointless duplication.
2014-06-17install: remove unused variableThomas Hindoe Paaboel Andersen
2014-06-17install: improve paths we show the user when enabling/disablingLennart Poettering
2014-06-17install: simplify symlink --root= logicLennart Poettering
2014-06-17install: "systemctl enable" should be a nop for template units lacking a ↵Lennart Poettering
DefaultInstance= setting
2014-06-17install: make sure that --root= mode doesn't make us consider all units ↵Lennart Poettering
outside of search path
2014-06-17install: make sure "systemctl disable foobar@.service" actually removes all ↵Lennart Poettering
instances
2014-06-17install: introduce new DefaultInstance= field for [Install] sectionsLennart Poettering
The DefaultInstance= name is used when enabling template units when only specifying the template name, but no instance. Add DefaultInstance=tty1 to getty@.service, so that when the template itself is enabled an instance for tty1 is created. This is useful so that we "systemctl preset-all" can work properly, because we can operate on getty@.service after finding it, and the right instance is created.
2014-06-17install: when looking for a unit file for enabling, search for templates ↵Lennart Poettering
only after traversing all search directories Let's always make sure to look in all search directories for the full unit names first, before looking for templates for them.
2014-06-17install: use symlink_atomic() instead of unlink()+symlink() when force ↵Lennart Poettering
creating a symlink
2014-06-17install: various modernizationsLennart Poettering
2014-06-17install: teach preset query logic --root= supportLennart Poettering
2014-06-17install: beef up preset logic to limit to only enable or only disable, and ↵Lennart Poettering
do all-unit preset operations The new "systemctl preset-all" command may now be used to put all installed units back into the enable/disable state the vendor/admin encoded in preset files. Also, introduce "systemctl --preset-mode=enable-only" and "systemctl --preset-mode=disable-only" to only apply the enable or only the disable operations of a "systemctl preset" or "systemctl preset-all" operation. "systemctl preset-all" implements this RFE: https://bugzilla.redhat.com/show_bug.cgi?id=630174
2014-06-17install: simplify and clarify disabling logic for instanced unitsLennart Poettering
2014-06-17install: various modernizationsLennart Poettering
2014-06-13install: fix invalid free() in unit_file_mask()Andreas Henriksson
int unit_file_mask(...) in ./src/shared/install.c calls get_config_path(...) which can in 4 error cases return without setting "ret", and thus "prefix" can be uninitialized when unit_file_mask(...) finishes (which it does directly after the error is returned from get_config_path(...)).
2014-05-15Make systemctl --root look for files in the proper placesZbigniew Jędrzejewski-Szmek
Running systemctl enable/disable/set-default/... with the --root option under strace reveals that it accessed various files and directories in the main fs, and not underneath the specified root. This can lead to correct results only when the layout and configuration in the container are identical, which often is not the case. Fix this by adding the specified root to all file access operations. This patch does not handle some corner cases: symlinks which point outside of the specified root might be interpreted differently than they would be by the kernel if the specified root was the real root. But systemctl does not create such symlinks by itself, and I think this is enough of a corner case not to be worth the additional complexity of reimplementing link chasing in systemd. Also, simplify the code in a few places and remove an hypothetical memory leak on error.
2014-05-15shared/install: do not prefix created symlink with root pathZbigniew Jędrzejewski-Szmek
Before: /var/tmp/inst1//etc/systemd/system/default.target -> /var/tmp/inst1//usr/lib/systemd/system/graphical.target After: /var/tmp/inst1/etc/systemd/system/default.target -> /usr/lib/systemd/system/graphical.target
2014-05-13replace more dup() by F_DUPFD_CLOEXECLennart Poettering
2014-04-23install: simplificationLennart Poettering
2014-04-16install: create_symlink() check unlink() return valueDjalal Harouni
create_symlink() do not check the return value of unlink(), this may confuse the user. Before the unlink() call we check the 'force' argument. If it is not set we fail with -EEXIST, otherwise we unlink() the file, therefore the next symlink() should not fail with -EEXIST (do not count races...). However since callers may not have appropriate privileges to unlink() the file we lose the -EPERM or any other errno code of unlink(), and return the -EEXIST of the next symlink(). Fix this by checking unlink() results. Before: $ systemctl --force --root=~/container-03 set-default multi-user.target Failed to set default target: File exists After: $ systemctl --force --root=~/container-03 set-default multi-user.target Failed to set default target: Permission denied
2014-03-18util: replace close_nointr_nofail() by a more useful safe_close()Lennart Poettering
safe_close() automatically becomes a NOP when a negative fd is passed, and returns -1 unconditionally. This makes it easy to write lines like this: fd = safe_close(fd); Which will close an fd if it is open, and reset the fd variable correctly. By making use of this new scheme we can drop a > 200 lines of code that was required to test for non-negative fds or to reset the closed fd variable afterwards.
2014-02-24Remove dead lines in various placesZbigniew Jędrzejewski-Szmek
As pointed-out by clang -Wunreachable-code. No behaviour changes.
2014-01-05shared/install: use char** convention for strvsZbigniew Jędrzejewski-Szmek
2013-12-26Use enums to make it obvious what boolean params meanZbigniew Jędrzejewski-Szmek
Suggested-by: Russ Allbery <rra@debian.org>
2013-12-25bus: rename message "serial" to "cookie"Lennart Poettering
Even if the lower-leveld dbus1 protocol calls it "serial", let's expose the word "cookie" for this instead, as this is what kdbus uses and since it doesn't imply monotonicity the same way "serial" does.
2013-12-21install: replace readdir_r with readdirFlorian Weimer
The old code incorrectly assumed that readdir_r updates errno.
2013-12-06Get rid of our reimplementation of basenameZbigniew Jędrzejewski-Szmek
The only problem is that libgen.h #defines basename to point to it's own broken implementation instead of the GNU one. This can be fixed by #undefining basename.
2013-11-25conf-parser: distinguish between multiple sections with the same nameTom Gundersen
Pass on the line on which a section was decleared to the parsers, so they can distinguish between multiple sections (if they chose to). Currently no parsers take advantage of this, but a follow-up patch will do that to distinguish [Address] Address=192.168.0.1/24 Label=one [Address] Address=192.168.0.2/24 Label=two from [Address] Address=192.168.0.1/24 Label=one Address=192.168.0.2/24 Label=two
2013-11-20core: convert PID 1 to libsystemd-busLennart Poettering
This patch converts PID 1 to libsystemd-bus and thus drops the dependency on libdbus. The only remaining code using libdbus is a test case that validates our bus marshalling against libdbus' marshalling, and this dependency can be turned off. This patch also adds a couple of things to libsystem-bus, that are necessary to make the port work: - Synthesizing of "Disconnected" messages when bus connections are severed. - Support for attaching multiple vtables for the same interface on the same path. This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus calls which used an inappropriate signature. As a side effect we will now generate PropertiesChanged messages which carry property contents, rather than just invalidation information.
2013-11-20install: when determining where default.target points to, accept a file ↵Lennart Poettering
instead of a symlink, too
2013-11-20install: use const where we canLennart Poettering
2013-11-08install: don't override caller's parameterLennart Poettering
2013-10-27path_lookup: moved _cleanup_lookup_paths_free_ from install.c to path-lookup.hDaniel Buch
2013-10-13Introduce udev object cleanup functionsZbigniew Jędrzejewski-Szmek
2013-10-13ModernizationZbigniew Jędrzejewski-Szmek
Fixes minor leak in error path in device.c.
2013-09-17specifier: rework specifier calls to return proper error messageLennart Poettering
Previously the specifier calls could only indicate OOM by returning NULL. With this change they will return negative errno-style error codes like everything else.
2013-07-14systemd: fix NULL dereference when disabling a nonexistent instanceZbigniew Jędrzejewski-Szmek
Assertion 'p' failed at src/shared/path-util.c:51, function path_get_file_name(). Aborting. The unit file could not be found, and i->path would not be set. In 02b9e969 a code path was added which attempts to remove symlinks to a nonexistent (removed) unit file. This worked OK in case of non-instance services, but broke in the case of instance services. Behaviour wrt. to instance units is changed in the way that 02b9e969 changed it for non-instance units: it is now possible to remove instance symlinks to a template unit that has been removed. This patch isn't a full fix, because the behaviour wrt. to enabling and disabling instance units is still broken: e.g it is possible to start autovt@tty5.service, but it is not possible to enable it, because autovt@.service is a symlink, and on the other hand, disabling getty@tty5.service removes all symlinks to getty@.service, which is wrong too. But segfaults make bad pr, so let's add at least this partial fix for now.
2013-07-13install: make "reenable" work with templated unitsRoss Lagerwall
Before, "systemctl reenable getty@tty1.service" would fail with: Failed to issue method call: File exists To fix this, reimplement "reenable" explicitly as a disable followed by an enable. This is shorter and is how the man page documents its behavior.
2013-07-12shared/install: fix trivial memleakZbigniew Jędrzejewski-Szmek
We lost the reference when setting path second time.
2013-06-03systemctl,core: allow nuking of symlinks to removed unitsZbigniew Jędrzejewski-Szmek
Before, one the unit file was deleted, install_context_for_removal() would refuse to look for symlinks. But we can remove dangling symlinks anyway. In principle, package installation/deinstallation scripts should do that before the unit is uninstalled, but they don't always do. Also, a user might have added additional symlinks manually. https://bugs.freedesktop.org/show_bug.cgi?id=62395
2013-05-30systemctl: add commands set-default and get-defaultVáclav Pavlín
systemctl set-default NAME links the default.target to the given unit, get-default prints out the path to the currently set default target.
2013-05-21systemctl: make systemctl is-enabled work for templated unitsMichael Tremer
Patch resolves the problem that 'systemctl is-enabled' does not work for templated units. Without this patch, systemctl is-enabled something@abc.service returned "No such file or directory", because it first checked if /usr/lib/systemd/system/something@abc.service, etc. exists. If systemctl is-enabled is called for templated units, this check should be omitted and it should search for symlinks in the .wants dirs right away. This patch fixes the broken behaviour and resolves https://bugs.freedesktop.org/show_bug.cgi?id=55318. [zj: fixed the patch to still check for broken symlinks and masked instances. Also removed untrue assumptions from the patch description.]
2013-04-25conf-parser: restrict .include usageLennart Poettering
Disallow recursive .include, and make it unavailable in anything but unit files.
2013-04-24Add set_consume which always takes ownershipZbigniew Jędrzejewski-Szmek
Freeing in error path is the common pattern with set_put().
2013-04-18move _cleanup_ attribute in front of the typeHarald Hoyer
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
2013-04-17Report about syntax errors with metadataZbigniew Jędrzejewski-Szmek
The information about the unit for which files are being parsed is passed all the way down. This way messages land in the journal with proper UNIT=... or USER_UNIT=... attribution. 'systemctl status' and 'journalctl -u' not displaying those messages has been a source of confusion for users, since the journal entry for a misspelt setting was often logged quite a bit earlier than the failure to start a unit. Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
2013-04-13fileio: in envfiles, do not skip lines following empty linesZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=63477
2013-04-13Remove a few NULLsZbigniew Jędrzejewski-Szmek
Just {} is used in a lot of places now, and there's nothing special abose those few.
2013-04-11errno is positiveZbigniew Jędrzejewski-Szmek
Make sure we compare errno against positive error codes. The ones in hwclock.c and install.c can have an impact, the rest are unlikely to be hit or in code that isn't widely used. Also check that errno > 0, to help gcc know that we are returning a negative error code.