| Age | Commit message (Collapse) | Author |
|---|
|
|
|
There is a small number of the places in sources where we don't check
asprintf() return code and assume that after error the function
returns NULL pointer via the first argument. That's wrong, after
error the content of pointer is undefined.
|
|
One missing string found.
A few things had to be moved around to make it possible to test them.
|
|
Special care is needed so that we get an error message if the
file failed to parse, but not when it is missing. To avoid duplicating
the same error check in every caller, add an additional 'warn' boolean
to tell config_parse whether a message should be issued.
This makes things both shorter and more robust wrt. to error reporting.
|
|
|
|
This restores the original root handling logic that was present prior to
112cfb18 when path expansion moved to path_strv_canonicalize_absolute.
That behavior partially went away in 12ed81d9.
Alternatively all users of conf_files_list* could be updated to
concatenate the paths themselves as unit_file_query_preset did but since
no user needs the un-concatenated form that is pointless duplication.
|
|
|
|
|
|
|
|
DefaultInstance= setting
|
|
outside of search path
|
|
instances
|
|
The DefaultInstance= name is used when enabling template units when only
specifying the template name, but no instance.
Add DefaultInstance=tty1 to getty@.service, so that when the template
itself is enabled an instance for tty1 is created.
This is useful so that we "systemctl preset-all" can work properly,
because we can operate on getty@.service after finding it, and the right
instance is created.
|
|
only after traversing all search directories
Let's always make sure to look in all search directories for the full
unit names first, before looking for templates for them.
|
|
creating a symlink
|
|
|
|
|
|
do all-unit preset operations
The new "systemctl preset-all" command may now be used to put all
installed units back into the enable/disable state the vendor/admin
encoded in preset files.
Also, introduce "systemctl --preset-mode=enable-only" and "systemctl
--preset-mode=disable-only" to only apply the enable or only the disable
operations of a "systemctl preset" or "systemctl preset-all" operation.
"systemctl preset-all" implements this RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=630174
|
|
|
|
|
|
int unit_file_mask(...) in ./src/shared/install.c calls
get_config_path(...) which can in 4 error cases return without setting
"ret", and thus "prefix" can be uninitialized when unit_file_mask(...)
finishes (which it does directly after the error is returned from
get_config_path(...)).
|
|
Running systemctl enable/disable/set-default/... with the --root
option under strace reveals that it accessed various files and
directories in the main fs, and not underneath the specified root.
This can lead to correct results only when the layout and
configuration in the container are identical, which often is not the
case. Fix this by adding the specified root to all file access
operations.
This patch does not handle some corner cases: symlinks which point
outside of the specified root might be interpreted differently than
they would be by the kernel if the specified root was the real root.
But systemctl does not create such symlinks by itself, and I think
this is enough of a corner case not to be worth the additional
complexity of reimplementing link chasing in systemd.
Also, simplify the code in a few places and remove an hypothetical
memory leak on error.
|
|
Before: /var/tmp/inst1//etc/systemd/system/default.target -> /var/tmp/inst1//usr/lib/systemd/system/graphical.target
After: /var/tmp/inst1/etc/systemd/system/default.target -> /usr/lib/systemd/system/graphical.target
|
|
|
|
|
|
create_symlink() do not check the return value of unlink(), this may
confuse the user.
Before the unlink() call we check the 'force' argument. If it is not set
we fail with -EEXIST, otherwise we unlink() the file, therefore the next
symlink() should not fail with -EEXIST (do not count races...).
However since callers may not have appropriate privileges to unlink()
the file we lose the -EPERM or any other errno code of unlink(), and
return the -EEXIST of the next symlink(). Fix this by checking unlink()
results.
Before:
$ systemctl --force --root=~/container-03 set-default multi-user.target
Failed to set default target: File exists
After:
$ systemctl --force --root=~/container-03 set-default multi-user.target
Failed to set default target: Permission denied
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
As pointed-out by clang -Wunreachable-code.
No behaviour changes.
|
|
|
|
Suggested-by: Russ Allbery <rra@debian.org>
|
|
Even if the lower-leveld dbus1 protocol calls it "serial", let's expose
the word "cookie" for this instead, as this is what kdbus uses and since
it doesn't imply monotonicity the same way "serial" does.
|
|
The old code incorrectly assumed that readdir_r updates errno.
|
|
The only problem is that libgen.h #defines basename to point to it's
own broken implementation instead of the GNU one. This can be fixed
by #undefining basename.
|
|
Pass on the line on which a section was decleared to the parsers, so they
can distinguish between multiple sections (if they chose to). Currently
no parsers take advantage of this, but a follow-up patch will do that
to distinguish
[Address]
Address=192.168.0.1/24
Label=one
[Address]
Address=192.168.0.2/24
Label=two
from
[Address]
Address=192.168.0.1/24
Label=one
Address=192.168.0.2/24
Label=two
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
instead of a symlink, too
|
|
|
|
|
|
|
|
|
|
Fixes minor leak in error path in device.c.
|
|
Previously the specifier calls could only indicate OOM by returning
NULL. With this change they will return negative errno-style error codes
like everything else.
|
|
Assertion 'p' failed at src/shared/path-util.c:51, function path_get_file_name(). Aborting.
The unit file could not be found, and i->path would not be set.
In 02b9e969 a code path was added which attempts to remove symlinks
to a nonexistent (removed) unit file. This worked OK in case of
non-instance services, but broke in the case of instance services.
Behaviour wrt. to instance units is changed in the way that 02b9e969
changed it for non-instance units: it is now possible to remove
instance symlinks to a template unit that has been removed.
This patch isn't a full fix, because the behaviour wrt. to enabling
and disabling instance units is still broken: e.g it is possible to
start autovt@tty5.service, but it is not possible to enable it,
because autovt@.service is a symlink, and on the other hand, disabling
getty@tty5.service removes all symlinks to getty@.service, which is
wrong too. But segfaults make bad pr, so let's add at least this
partial fix for now.
|
|
Before, "systemctl reenable getty@tty1.service" would fail with:
Failed to issue method call: File exists
To fix this, reimplement "reenable" explicitly as a disable followed by
an enable.
This is shorter and is how the man page documents its behavior.
|
|
We lost the reference when setting path second time.
|
|
Before, one the unit file was deleted, install_context_for_removal()
would refuse to look for symlinks. But we can remove dangling symlinks
anyway.
In principle, package installation/deinstallation scripts should do
that before the unit is uninstalled, but they don't always do. Also,
a user might have added additional symlinks manually.
https://bugs.freedesktop.org/show_bug.cgi?id=62395
|
|
systemctl set-default NAME links the default.target to the given unit,
get-default prints out the path to the currently set default target.
|
|
Patch resolves the problem that 'systemctl is-enabled' does
not work for templated units.
Without this patch, systemctl is-enabled something@abc.service
returned "No such file or directory", because it first checked
if /usr/lib/systemd/system/something@abc.service, etc. exists.
If systemctl is-enabled is called for templated units, this
check should be omitted and it should search for symlinks in
the .wants dirs right away.
This patch fixes the broken behaviour and resolves
https://bugs.freedesktop.org/show_bug.cgi?id=55318.
[zj: fixed the patch to still check for broken symlinks and
masked instances. Also removed untrue assumptions from
the patch description.]
|
|
Disallow recursive .include, and make it unavailable in anything but
unit files.
|
|
Freeing in error path is the common pattern with set_put().
|
