| Age | Commit message (Collapse) | Author |
|---|
|
|
|
It may be desired by users to know what targets a particular service is
installed into. Improve user friendliness by teaching the is-enabled
command to show such information when used with --full.
This patch makes use of the newly added UnitFileFlags and adds
UNIT_FILE_DRY_RUN flag into it. Since the API had already been modified,
it's now easy to add the new dry-run feature for other commands as
well. As a next step, --dry-run could be added to systemctl, which in
turn might pave the way for a long requested dry-run feature when
running systemctl start.
|
|
Introduce a new enum to get rid of some boolean arguments of unit_file_*
functions. It unifies the code, makes it a bit cleaner and extensible.
|
|
With the following test case:
[Install]
WantedBy= default.target
Also=foobar-unknown.service
disabling would fail with:
$ ./systemctl --root=/ disable testing.service
Cannot find unit foobar-unknown.service. # this is level debug
Failed to disable: No such file or directory. # this is the error
After the change we proceed:
$ ./systemctl --root=/ disable testing.service
Cannot find unit foobar-unknown.service.
Removed /etc/systemd/system/default.target.wants/testing.service.
This does not affect specifying a missing unit directly:
$ ./systemctl --root=/ disable nosuch.service
Failed to disable: No such file or directory.
|
|
This fixes 'preset-all' with a unit that is a dangling symlink.
$ systemctl --root=/ preset-all
Unit syslog.service is an alias to a unit that is not present, ignoring.
Unit auditd.service is masked, ignoring.
Unit NetworkManager.service is masked, ignoring.
|
|
This way it can be used in install.c in subsequent commit.
|
|
This way it can be used in install.c in subsequent commit.
|
|
This commit improves systemd performance on the systems which have
thousands of units.
|
|
-1 could be confused with -EPERM. But we still need a negative enum
value to force gcc to use int for the enum type, even though it is
unused. Otherwise we get warnings.
|
|
Fixes #2191:
$ systemctl --root=/ enable sddm
Created symlink /etc/systemd/system/display-manager.service, pointing to /usr/lib/systemd/system/sddm.service.
$ sudo build/systemctl --root=/ enable gdm
Failed to enable unit, file /etc/systemd/system/display-manager.service already exists and is a symlink to /usr/lib/systemd/system/sddm.service.
$ sudo build/systemctl --root= enable sddm
$ sudo build/systemctl --root= enable gdm
Failed to enable unit: File /etc/systemd/system/display-manager.service already exists and is a symlink to /usr/lib/systemd/system/sddm.service.
(I tried a few different approaches to pass the error information back to the
caller. Adding a new parameter to hold the error results in a gigantic patch
and a lot of hassle to pass the args arounds. Adding this information to the
changes array is straightforward and can be more easily extended in the
future.)
In case local installation is performed, the full set of errors can be reported
and we do that. When running over dbus, only the first error is reported.
|
|
As suggested in review of #3049.
|
|
|
|
With any masked unit that would that would be enabled by presets, we'd get:
test@rawhide $ sudo systemctl preset-all
Failed to execute operation: Unit file is masked.
test@rawhide $ sudo systemctl --root=/ preset-all
Operation failed: Cannot send after transport endpoint shutdown
Simply ignore those units:
test@rawhide $ sudo systemctl preset-all
Unit xxx.service is masked, ignoring.
|
|
This allows dropping all user configuration and reverting back to the vendor
default of a unit file. It basically undoes what "systemctl edit", "systemctl
set-property" and "systemctl mask" do.
|
|
We only use it inside of install.c, hence let's make it static.
|
|
Move the search path check from the SysV service compat support into install.c
so that we can reuse the usual algorithm instead of rolling a private loop for
this.
|
|
Now, that the search path logic knows the unit path for transient units we also
can introduce an explicit unit file state "transient" that clarifies to the
user what kind of unit file he is encountering.
|
|
We use the root directory parameter while putting together the LookupPaths
structure, hence let's also store it in the structure as-is. That way we can
drop a parameter from half of the functions in install.c
Also, let's move the validation of the root paths into lookup_paths_init() so
that we can drop even more code from install.c
|
|
Now that we store the generator directories in LookupPaths we can use this to
intrdouce a new unit file state called "generated", for units in these
directories.
Fixes: #2348
|
|
A long time ago – when generators where first introduced – the directories for
them were randomly created via mkdtemp(). This was changed later so that they
use fixed name directories now. Let's make use of this, and add the genrator
dirs to the LookupPaths structure and into the unit file search path maintained
in it. This has the benefit that the generator dirs are now normal part of the
search path for all tools, and thus are shown in "systemctl list-unit-files"
too.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
The next step of a general cleanup of our includes. This one mostly
adds missing includes but there are a few removals as well.
|
|
Previously, the %u, %U, %s and %h specifiers would resolve to the user
name, numeric user ID, shell and home directory of the user configured
in the User= setting of a unit file, or the user of the manager instance
if no User= setting was configured. That at least was the theory. In
real-life this was not ever actually useful:
- For the systemd --user instance it made no sense to ever set User=,
since the instance runs in user context after all, and hence the
privileges to change user IDs don't even exist. The four specifiers
were actually not useful at all in this case.
- For the systemd --system instance we did not allow any resolving that
would require NSS. Hence, %s and %h were not supported, unless
User=root was set, in which case they would be hardcoded to /bin/sh
and /root, to avoid NSS. Then, %u would actually resolve to whatever
was set with User=, but %U would only resolve to the numeric UID of
that setting if the User= was specified in numeric form, or happened
to be root (in which case 0 was hardcoded as mapping). Two of the
specifiers are entirely useless in this case, one is realistically
also useless, and one is pretty pointless.
- Resolving of these settings would only happen if User= was actually
set *before* the specifiers where resolved. This behaviour was
undocumented and is really ugly, as specifiers should actually be
considered something that applies to the whole file equally,
independently of order...
With this change, %u, %U, %s and %h are drastically simplified: they now
always refer to the user that is running the service instance, and the
user configured in the unit file is irrelevant. For the system instance
of systemd this means they always resolve to "root", "0", "/bin/sh" and
"/root", thus avoiding NSS. For the user instance, to the data for the
specific user.
The new behaviour is identical to the old behaviour in all --user cases
and for all units that have no User= set (or set to "0" or "root").
|
|
[Install] data
Some distributions use alias unit files via symlinks in /usr to cover
for legacy service names. With this change we'll allow "systemctl
enable" on such aliases.
Previously, our rule was that symlinks are user configuration that
"systemctl enable" + "systemctl disable" creates and removes, while unit
files is where the instructions to do so are store. As a result of the
rule we'd never read install information through symlinks, since that
would mix enablement state with installation instructions.
Now, the new rule is that only symlinks inside of /etc are
configuration. Unit files, and symlinks in /usr are now valid for
installation instructions.
This patch is quite a rework of the whole install logic, and makes the
following addional changes:
- Adds a complete test "test-instal-root" that tests the install logic
pretty comprehensively.
- Never uses canonicalize_file_name(), because that's incompatible with
operation relative to a specific root directory.
- unit_file_get_state() is reworked to return a proper error, and
returns the state in a call-by-ref parameter. This cleans up confusion
between the enum type and errno-like errors.
- The new logic puts a limit on how long to follow unit file symlinks:
it will do so only for 64 steps at max.
- The InstallContext object's fields are renamed to will_process and
has_processed (will_install and has_installed) since they are also
used for deinstallation and all kinds of other operations.
- The root directory is always verified before use.
- install.c is reordered to place the exported functions together.
- Stricter rules are followed when traversing symlinks: the unit suffix
must say identical, and it's not allowed to link between regular units
and templated units.
- Various modernizations
- The "invalid" unit file state has been renamed to "bad", in order to
avoid confusion between UNIT_FILE_INVALID and
_UNIT_FILE_STATE_INVALID. Given that the state should normally not be
seen and is not documented this should not be a problematic change.
The new name is now documented however.
Fixes #1375, #1718, #1706
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=42940
|
|
All other types exported from install.h should be namespaces like this,
hence namespace InstallInfo the same way.
Also, remove external forward definition of UnitFileScope type.
|
|
With debugging on, sysv-generator would print the full set of
lookup paths for *every* sysv script.
While at it, pass LookupPaths as a pointer in sysv-generator,
and constify it everywhere.
|
|
If a unit contains only Also=, with no Alias= or WantedBy=, it shouldn't
be reported as static. New 'indirect' status shall be introduced.
https://bugzilla.redhat.com/show_bug.cgi?id=864298
|
|
|
|
One missing string found.
A few things had to be moved around to make it possible to test them.
|
|
The DefaultInstance= name is used when enabling template units when only
specifying the template name, but no instance.
Add DefaultInstance=tty1 to getty@.service, so that when the template
itself is enabled an instance for tty1 is created.
This is useful so that we "systemctl preset-all" can work properly,
because we can operate on getty@.service after finding it, and the right
instance is created.
|
|
|
|
do all-unit preset operations
The new "systemctl preset-all" command may now be used to put all
installed units back into the enable/disable state the vendor/admin
encoded in preset files.
Also, introduce "systemctl --preset-mode=enable-only" and "systemctl
--preset-mode=disable-only" to only apply the enable or only the disable
operations of a "systemctl preset" or "systemctl preset-all" operation.
"systemctl preset-all" implements this RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=630174
|
|
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
|
|
systemctl set-default NAME links the default.target to the given unit,
get-default prints out the path to the currently set default target.
|
|
I'm assuming that it's fine if a _const_ or _pure_ function
calls assert. It is assumed that the assert won't trigger,
and even if it does, it can only trigger on the first call
with a given set of parameters, and we don't care if the
compiler moves the order of calls.
|
|
|
|
This allows one templated unit to refer to another templated unit
at installation time.
Examples:
> grep WantedBy ~/.config/systemd/user/mpop@.timer
WantedBy=services@%i.target
> srv disable mpop@iit.timer
rm '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
> srv enable mpop@iit.timer
ln -s '/home/alxchk/.config/systemd/user/mpop@.timer' '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
Based-on-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
|
|
state
|
|
#pragma once has been "un-deprecated" in gcc since 3.3, and is widely supported
in other compilers.
I've been using and maintaining (rebasing) this patch for a while now, as
it annoyed me to see #ifndef fooblahfoo, etc all over the place,
almost arrogant about the annoyance of having to define all these names to
perform a commen but neccicary functionality, when a completely superior
alternative exists.
I havn't sent it till now, cause its kindof a style change, and it is bad
voodoo to mess with style that has been established by more established
editors. So feel free to lambast me as a crazy bafoon.
v2 - preserve externally used headers
|
|
|
