| Age | Commit message (Collapse) | Author |
|---|
|
basic/ can be used by everything
cannot use anything outside of basic/
libsystemd/ can use basic/
cannot use shared/
shared/ can use libsystemd/
|
|
This changes log_unit_info() (and friends) to take a real Unit* object
insted of just a unit name as parameter. The call will now prefix all
logged messages with the unit name, thus allowing the unit name to be
dropped from the various passed romat strings, simplifying invocations
drastically, and unifying log output across messages. Also, UNIT= vs.
USER_UNIT= is now derived from the Manager object attached to the Unit
object, instead of getpid(). This has the benefit of correcting the
field for --test runs.
Also contains a couple of other logging improvements:
- Drops a couple of strerror() invocations in favour of using %m.
- Not only .mount units now warn if a symlinks exist for the mount
point already, .automount units do that too, now.
- A few invocations of log_struct() that didn't actually pass any
additional structured data have been replaced by simpler invocations
of log_unit_info() and friends.
- For structured data a new LOG_UNIT_MESSAGE() macro has been added,
that works like LOG_MESSAGE() but prefixes the message with the unit
name. Similar, there's now LOG_LINK_MESSAGE() and
LOG_NETDEV_MESSAGE().
- For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(),
LOG_NETDEV_INTERFACE() macros have been added that generate the
necessary per object fields. The old log_unit_struct() call has been
removed in favour of these new macros used in raw log_struct()
invocations. In addition to removing one more function call this
allows generated structured log messages that contain two object
fields, as necessary for example for network interfaces that are
joined into another network interface, and whose messages shall be
indexed by both.
- The LOG_ERRNO() macro has been removed, in favour of
log_struct_errno(). The latter has the benefit of ensuring that %m in
format strings is properly resolved to the specified error number.
- A number of logging messages have been converted to use
log_unit_info() instead of log_info()
- The client code in sysv-generator no longer #includes core code from
src/core/.
- log_unit_full_errno() has been removed, log_unit_full() instead takes
an errno now, too.
- log_unit_info(), log_link_info(), log_netdev_info() and friends, now
avoid double evaluation of their parameters
|
|
the other log functions
|
|
audit.h uses uint32_t and bool.
log.h uses abs.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
|
|
syslog priority
This is useful when we execute our own programs, reading output from its
STDERR, and want to retain priority information.
|
|
Make sure to extract the log-priority when comparing against
max-log-level, otherwise, we will always drop those messages.
This fixes bus-proxyd to properly send warnings on policy blocks.
|
|
It was not passing the error argument.
|
|
This enables us to write things like this:
int open_some_file(void) {
fd = open("/dev/foobar", O_RDWR|O_CLOEXEC);
if (fd < 0)
return log_error_errno(errno, "Failed to reboot: %m");
return fd;
}
Which is function that returns -errno on failure, as well as printing an
error message, all in one line.
|
|
sd_bus_error_set_errno() allows negative errors too, hence, be equally
nice.
|
|
Also, while we are at it, introduce some syntactic sugar for creating
ERRNO= and MESSAGE= structured logging fields.
|
|
- Rename log_meta() → log_internal(), to follow naming scheme of most
other log functions that are usually invoked through macros, but never
directly.
- Rename log_info_object() to log_object_info(), simply because the
object should be before any other parameters, to follow OO-style
programming style.
|
|
log_error_errno() as log calls that take error numbers
This change has two benefits:
- The format string %m will now resolve to the specified error (or to
errno if the specified error is 0. This allows getting rid of a ton of
strerror() invocations, a function that is not thread-safe.
- The specified error can be passed to the journal in the ERRNO= field.
Now of course, we just need somebody to convert all cases of this:
log_error("Something happened: %s", strerror(-r));
into thus:
log_error_errno(-r, "Something happened: %m");
|
|
This adds a new log_emergency() function, which is equivalent to
log_error() for non-PID-1, and logs at the highest priority for PID 1.
Some messages which occur before freezing are converted to use it.
|
|
Repetetive messages can be annoying when running with
SYSTEMD_LOG_LEVEL=debug, but they are sometimes very useful
when debugging problems. Add log_trace which is like log_debug
but becomes a noop unless LOG_TRACE is defined during compilation.
This makes it easy to enable very verbose logging for a subset
of programs when compiling from source.
|
|
We don't support journal-less systems anyway, so let's avoid the
confusion.
|
|
If PID 1 debug logging is enabled, it is nice to keep those settings
when switching to systemd-shutdown binary, independently of whether
this was done through /proc/cmdline options, or through runtime
manipulations.
|
|
|
|
also define noreturn w/o <stdnoreturn.h>
|
|
|
|
|
|
maximum
Messages with log levels above the current maximum log level will be dropped
inside log_meta(). But to be able to call the function, all parameters for
the function need to be provided. This can easily get expensive, if values
need to be calculated or functions are used in parameters.
Avoid all useless work by checking inside the macro, before we look
at any parameters passed to the logging functions.
|
|
Always use our own macros, and name all our own macros the same style.
|
|
I'm assuming that it's fine if a _const_ or _pure_ function
calls assert. It is assumed that the assert won't trigger,
and even if it does, it can only trigger on the first call
with a given set of parameters, and we don't care if the
compiler moves the order of calls.
|
|
|
|
Adding UNIT= to log lines allows them to be shown
in 'systemctl status' output, etc.
A new set of macros and functions is added. This allows for less
verbose notation than using log_struct() explicitly.
The set of logging functions is expanded to take a pair of arguments
(e.g. "UNIT=" and the RHS) which add an extra line to the structured
log entry. This can be used to add macros which add a different
identifier later on.
|
|
|
|
If it is exported it would need to be prefixed, but since we need it
exclusively internally so far, simply move it to an internal header.
|
|
|
|
|
|
The callers' code gets smaller.
|
|
|
|
also a number of minor fixups and bug fixes: spelling, oom errors
that didn't print errors, not properly forwarding error codes,
few more consistency issues, et cetera
|
|
#pragma once has been "un-deprecated" in gcc since 3.3, and is widely supported
in other compilers.
I've been using and maintaining (rebasing) this patch for a while now, as
it annoyed me to see #ifndef fooblahfoo, etc all over the place,
almost arrogant about the annoyance of having to define all these names to
perform a commen but neccicary functionality, when a completely superior
alternative exists.
I havn't sent it till now, cause its kindof a style change, and it is bad
voodoo to mess with style that has been established by more established
editors. So feel free to lambast me as a crazy bafoon.
v2 - preserve externally used headers
|
|
deadlocks
This makes all generators log to kmsg by default.
|
|
We finally got the OK from all contributors with non-trivial commits to
relicense systemd from GPL2+ to LGPL2.1+.
Some udev bits continue to be GPL2+ for now, but we are looking into
relicensing them too, to allow free copy/paste of all code within
systemd.
The bits that used to be MIT continue to be MIT.
The big benefit of the relicensing is that closed source code may now
link against libsystemd-login.so and friends.
|
|
internal libraries
Before:
$ ldd /lib/systemd/systemd-timestamp
linux-vdso.so.1 => (0x00007fffb05ff000)
libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f90aac57000)
libcap.so.2 => /lib64/libcap.so.2 (0x00007f90aaa53000)
librt.so.1 => /lib64/librt.so.1 (0x00007f90aa84a000)
libc.so.6 => /lib64/libc.so.6 (0x00007f90aa494000)
/lib64/ld-linux-x86-64.so.2 (0x00007f90aae90000)
libdl.so.2 => /lib64/libdl.so.2 (0x00007f90aa290000)
libattr.so.1 => /lib64/libattr.so.1 (0x00007f90aa08a000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f90a9e6e000)
After:
$ ldd systemd-timestamp
linux-vdso.so.1 => (0x00007fff3cbff000)
libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f5eaa1c3000)
librt.so.1 => /lib64/librt.so.1 (0x00007f5ea9fbb000)
libc.so.6 => /lib64/libc.so.6 (0x00007f5ea9c04000)
/lib64/ld-linux-x86-64.so.2 (0x00007f5eaa3fc000)
libdl.so.2 => /lib64/libdl.so.2 (0x00007f5ea9a00000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f5ea97e4000)
|
