summaryrefslogtreecommitdiff
path: root/src/shared/logs-show.c
AgeCommit message (Collapse)Author
2016-07-19journalctl: make sure that journalctl's --all switch also has an effect on ↵Lennart Poettering
json output With this change, binary record data is formatted as string if --all is specified when using json output. This is inline with the effect of --all on the other available output modes. Fixes: #3416
2016-04-26journal: when dumping journal contents, react nicer to lines we can't readLennart Poettering
If journal files are not cleanly closed it might happen that intermediaery journal entries cannot be read. Handle this nicely, skip over the unreadable entries, and log a debug message about it; after all we generally follow the logic that we try to make the best of corrupted files.
2016-04-22journalctl: add --no-hostname switchLennart Poettering
This suppresses output of the hostname for messages from the local system. Fixes: #2342
2016-04-22journalctl: add output mode where time is shown in seconds since 1st Jan ↵Lennart Poettering
1970 UTC aka "UNIX time". Fixes: #2120
2016-04-22shared: move output_mode_to_string() into output-mode.cLennart Poettering
After all, the enum definition is in output-mode.h
2016-04-22shared: fix minor memory leak in log display codeLennart Poettering
2016-04-21shared/logs-show: fix memleak in add_matches_for_unitZbigniew Jędrzejewski-Szmek
2016-02-22tree-wide: make ++/-- usage consistent WRT spacingVito Caputo
Throughout the tree there's spurious use of spaces separating ++ and -- operators from their respective operands. Make ++ and -- operator consistent with the majority of existing uses; discard the spaces.
2016-02-10tree-wide: remove Emacs lines from all filesDaniel Mack
This should be handled fine now by .dir-locals.el, so need to carry that stuff in every file.
2016-01-28shared: meanor clean-ups for logs-show.cLennart Poettering
Some minor simplifications. Shouldn't change codepaths.
2015-12-13journal: properly handle an unexpectedly missing fieldZbigniew Jędrzejewski-Szmek
parse_field() checks if the field has the expected format, and returns 0 if it doesn't. In that case, value and size are not set. Nevertheless, we would try to continue, and hit an assert in safe_atou64. This case shouldn't happen, unless sd_j_get_data is borked, so cleanly assert that we got the expected field. Also, oom is the only way that parse_field can fail, which we log already. Instead of outputting a debug statement and carrying on, treat oom as fatal.
2015-12-06shared: include what we useThomas Hindoe Paaboel Andersen
The next step of a general cleanup of our includes. This one mostly adds missing includes but there are a few removals as well.
2015-11-27tree-wide: expose "p"-suffix unref calls in public APIs to make gcc cleanup easyLennart Poettering
GLIB has recently started to officially support the gcc cleanup attribute in its public API, hence let's do the same for our APIs. With this patch we'll define an xyz_unrefp() call for each public xyz_unref() call, to make it easy to use inside a __attribute__((cleanup())) expression. Then, all code is ported over to make use of this. The new calls are also documented in the man pages, with examples how to use them (well, I only added docs where the _unref() call itself already had docs, and the examples, only cover sd_bus_unrefp() and sd_event_unrefp()). This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we tend to call our destructors these days. Note that this defines no public macro that wraps gcc's attribute and makes it easier to use. While I think it's our duty in the library to make our stuff easy to use, I figure it's not our duty to make gcc's own features easy to use on its own. Most likely, client code which wants to make use of this should define its own: #define _cleanup_(function) __attribute__((cleanup(function))) Or similar, to make the gcc feature easier to use. Making this logic public has the benefit that we can remove three header files whose only purpose was to define these functions internally. See #2008.
2015-10-27util-lib: split out allocation calls into alloc-util.[ch]Lennart Poettering
2015-10-27util-lib: move string table stuff into its own string-table.[ch]Lennart Poettering
2015-10-27util-lib: split string parsing related calls from util.[ch] into parse-util.[ch]Lennart Poettering
2015-10-26util-lib: split out IO related calls to io-util.[ch]Lennart Poettering
2015-10-25util-lib: split out fd-related operations into fd-util.[ch]Lennart Poettering
There are more than enough to deserve their own .c file, hence move them over.
2015-10-24util-lib: split our string related calls from util.[ch] into its own file ↵Lennart Poettering
string-util.[ch] There are more than enough calls doing string manipulations to deserve its own files, hence do something about it. This patch also sorts the #include blocks of all files that needed to be updated, according to the sorting suggestions from CODING_STYLE. Since pretty much every file needs our string manipulation functions this effectively means that most files have sorted #include blocks now. Also touches a few unrelated include files.
2015-09-22cgtop: underline table headerLennart Poettering
Let's underline the header line of the table shown by cgtop, how it is customary for tables. In order to do this, let's introduce new ANSI underline macros, and clean up the existing ones as side effect.
2015-09-09tree-wide: drop {} from one-line if blocksLennart Poettering
Patch via coccinelle.
2015-08-24util: make machine_name_is_valid() a macro and move it to hostname-util.hLennart Poettering
As it turns out machine_name_is_valid() does the exact same thing as hostname_is_valid() these days, as it just invoked that and checked the name length was < 64. However, hostname_is_valid() checks the length against HOST_NAME_MAX anyway (which is 64 on Linux), hence any additional check is redundant. We hence replace machine_name_is_valid() by a macro that simply maps it to hostname_is_valid() but sets the allow_trailing_dot parameter to false. We also move this this call to hostname-util.h, to the same place as the hostname_is_valid() declaration.
2015-08-18journal: fix json output of unicode charactersDaniel Mack
2015-08-17namespace helpers: Allow entering a UID namespaceRichard Maw
To be able to use `systemd-run` or `machinectl login` on a container that is in a private user namespace, the sub-process must have entered the user namespace before connecting to the container's D-Bus, otherwise the UID and GID in the peer credentials are garbage. So we extend namespace_open and namespace_enter to support UID namespaces, and we enter the UID namespace in bus_container_connect_{socket,kernel}. namespace_open will degrade to a no-op if user namespaces are not enabled in the kernel. Special handling is required for the setns call in namespace_enter with a user namespace, since transitioning to your own namespace is forbidden, as it would result in re-entering your user namespace as root. Arguably it may be valid to check this at the call site, rather than inside namespace_enter, but it is less code to do it inside, and if the intention of calling namespace_enter is to *be* in the target namespace, rather than to transition to the target namespace, it is a reasonable approach. The check for whether the user namespace is the same must happen before entering namespaces, as we may not be able to access /proc during the intermediate transition stage. We can't instead attempt to enter the user namespace and then ignore the failure from it being the same namespace, since the error code is not distinct, and we can't compare namespaces while mid-transition.
2015-06-17logs-show: print a debug message when we skip entries without MESSAGE= fieldsLennart Poettering
2015-05-19journalctl: clean up how we log errorsLennart Poettering
All functions should either log the errors they run into, or only return them in which case the caller should log them. Make sure this rule is followed, so that each error is logged precisely once, and neither never, nor more than once.
2015-04-21tree-wide: get rid of more strerror() callsLennart Poettering
2015-04-11shared: add terminal-util.[ch]Ronny Chevalier
2015-04-10shared: add process-util.[ch]Ronny Chevalier
2015-04-10shared: add formats-util.hRonny Chevalier
2015-03-27fix gcc warnings about uninitialized variablesHarald Hoyer
like: src/shared/install.c: In function ‘unit_file_lookup_state’: src/shared/install.c:1861:16: warning: ‘r’ may be used uninitialized in this function [-Wmaybe-uninitialized] return r < 0 ? r : state; ^ src/shared/install.c:1796:13: note: ‘r’ was declared here int r; ^
2015-03-10logs-show: fix check of loop_read_exactThomas Hindoe Paaboel Andersen
just a typo fix
2015-03-09Introduce loop_read_exact helperZbigniew Jędrzejewski-Szmek
Usually when using loop_read(), we want to read the full buffer. Add a helper that mirrors loop_write(), and returns 0 when full buffer was read, and an error otherwise. Use -ENODATA for the short read, to distinguish it from a read error.
2015-02-23remove unused includesThomas Hindoe Paaboel Andersen
This patch removes includes that are not used. The removals were found with include-what-you-use which checks if any of the symbols from a header is in use.
2015-02-12include <poll.h> instead of <sys/poll.h>Thomas Hindoe Paaboel Andersen
include-what-you-use automatically does this and it makes finding unnecessary harder to spot. The only content of poll.h is a include of sys/poll.h so should be harmless.
2015-02-03util: rework strappenda(), and rename it strjoina()Lennart Poettering
After all it is now much more like strjoin() than strappend(). At the same time, add support for NULL sentinels, even if they are normally not necessary.
2015-01-08loginctl: show the 10 most recent log user/session log lines in "loginctl ↵Lennart Poettering
user-status" and "loginctl session-status"
2015-01-06tree-wide: remove unnecessary LOG_PRIZbigniew Jędrzejewski-Szmek
LOG_DEBUG is already a log level, there is no need to use LOG_PRI which is for filtering out the facility.
2014-11-28treewide: a few more log_*_errno + return simplificationsMichal Schmidt
The one in tmpfiles.c:create_item() even looks like it fixes a bug.
2014-11-28treewide: yet more log_*_errno + return simplificationsMichal Schmidt
Using: find . -name '*.[ch]' | while read f; do perl -i.mmm -e \ 'local $/; local $_=<>; s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg; print;' $f done And a couple of manual whitespace fixups.
2014-11-28treewide: more log_*_errno() conversions, multiline callsMichal Schmidt
Basically: find . -name '*.[ch]' | while read f; do perl -i.mmm -e \ 'local $/; local $_=<>; s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \ $f; done Plus manual indentation fixups.
2014-11-28treewide: no need to negate errno for log_*_errno()Michal Schmidt
It corrrectly handles both positive and negative errno values.
2014-11-28treewide: auto-convert the simple cases to log_*_errno()Michal Schmidt
As a followup to 086891e5c1 "log: add an "error" parameter to all low-level logging calls and intrdouce log_error_errno() as log calls that take error numbers", use sed to convert the simple cases to use the new macros: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/' Multi-line log_*() invocations are not covered. And we also should add log_unit_*_errno().
2014-11-04journal: when dumping log data with missing COMM fields, show "unknown" insteadLennart Poettering
A small readability improvement...
2014-10-22machine: validate machine names using machine_name_is_valid() instead of ↵Lennart Poettering
string_is_safe() After all, we know have this as generic validator, so let's be correct and use it wherver applicable.
2014-10-08time: functions named "internal" really shouldn't be exportedLennart Poettering
Also, let's try to make function names descriptive, instead of using bools for flags.
2014-10-03journalctl: make --utc work everywhereJan Synacek
The --utc option was introduced by commit 9fd290443f5f99fca0dcd4216b1de70f7d3b8db1. Howerver, the implementation was incomplete.
2014-10-02journalctl: add --utc optionJan Synacek
Introduce option to display time in UTC.
2014-09-15hashmap: introduce hash_ops to make struct Hashmap smallerMichal Schmidt
It is redundant to store 'hash' and 'compare' function pointers in struct Hashmap separately. The functions always comprise a pair. Store a single pointer to struct hash_ops instead. systemd keeps hundreds of hashmaps, so this saves a little bit of memory.
2014-07-29time-util: add and use USEC/NSEC_INFINIYKay Sievers