| Age | Commit message (Collapse) | Author |
|---|
|
CID #1354671: char **l would be leaked.
Also rename l to paths, to make the code easier to read,
and do strv deduplication immediately when extending. No need to allocate
strings to remove them a few lines down.
|
|
The coccinelle patch didn't work in some places, I have no idea why.
|
|
The SysV compat code checks whether there's a native unit file before looking
for a SysV init script. Since the newest rework generated units will show up in
the unit path, and hence the checks ended up assuming that there always was a
native unit file for each init script: the generated one.
With this change the generated unit file directory is suppressed from the
search path when this check is done, to avoid the confusion.
|
|
Let's keep the code that manipulates LookupPaths together, and move
generator_binary_paths() to the end of the .h and .c files, since it is not
strictly related to that.
|
|
This patch adds a concept of a "control" unit file directory, which is supposed
to be used as place for unit file drop-ins created by "systemctl set-property"
(note that this directory is not actually hooked up to "systemctl set-property"
yet, that's coming in a later patch).
The rationale for this: previously changes made by the user and by "systemctl
set-property" were done in the same directory, which made semantics very
unclear: the changes made by "systemctl set-property" were applied instantly,
and their drop-ins only written to not lose settings on a later "systemctl
daemon-reload", while drop-ins made by the user would only be in effect after
"systemctl daemon-reload". This is particular problematic as the changes made
by "systemctl set-property" would really apply immediately without any respect
for the unit search path. This meant that using "set-property" could have an
effect that is lsot as soon as "daemon-reload" is issued, in case there was a
"later" drop-in already in place.
With this change the directories are seperated, and the "control" directory
always takes the highest priority of all, to avoid any confusion.
|
|
This is too confusing, as this funciton returns the paths to the generator
binaries, while usually when we refer to the just the "generator path" we mean
the generated unit files. Let's clean this up.
|
|
It's very similar to the mkdir and trim operations for the generator dirs,
hence let's unify this at a single place.
|
|
Let's make the suffix it appends configurable. This way we can reuse it at a second place.
|
|
Let's modernize these calls a bit.
Also, don't call them from user_dirs() anymore, as we already have both dirs in
the list a second time via the persistent_config and runtime_config function
parameters.
|
|
user_runtime_dir() and user_config_home() are not used externally anymore,
hence let's not export them anymore.
|
|
Move this into a function of its own, so that we can run it after we ran the
generators, so that it takes into account removed generator dirs.
|
|
functions
|
|
Previously, transient units were created below the normal runtime directory
/run/systemd/system. With this change they are created in a special transient
directory /run/systemd/transient, which only contains data for transient units.
This clarifies the life-cycle of transient units, and makes clear they are
distinct from user-provided runtime units. In particular, users may now
extend transient units via /run/systemd/system, without systemd interfering
with the life-cycle of these files.
This change also adds code so that when a transient unit exits only the
drop-ins in this new directory are removed, but nothing else.
Fixes: #2139
|
|
After all, for test builds they might differ from /etc/systemd/{user|system},
hence they should be included.
|
|
We use the root directory parameter while putting together the LookupPaths
structure, hence let's also store it in the structure as-is. That way we can
drop a parameter from half of the functions in install.c
Also, let's move the validation of the root paths into lookup_paths_init() so
that we can drop even more code from install.c
|
|
Previously, we had two enums ManagerRunningAs and UnitFileScope, that were
mostly identical and converted from one to the other all the time. The latter
had one more value UNIT_FILE_GLOBAL however.
Let's simplify things, and remove ManagerRunningAs and replace it by
UnitFileScope everywhere, thus making the translation unnecessary. Introduce
two new macros MANAGER_IS_SYSTEM() and MANAGER_IS_USER() to simplify checking
if we are running in one or the user context.
|
|
Let's add a seperate fields for the directories where we place runtime and
persistent configuration, so that we can use this in install.c (to be added in
a later commit), and we store path information in the same place everywhere.
|
|
A long time ago – when generators where first introduced – the directories for
them were randomly created via mkdtemp(). This was changed later so that they
use fixed name directories now. Let's make use of this, and add the genrator
dirs to the LookupPaths structure and into the unit file search path maintained
in it. This has the benefit that the generator dirs are now normal part of the
search path for all tools, and thus are shown in "systemctl list-unit-files"
too.
|
|
We don't need it anymore, give that sysv-generator can determine the path on
its own now.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
The next step of a general cleanup of our includes. This one mostly
adds missing includes but there are a few removals as well.
|
|
Sort the includes accoding to the new coding style.
|
|
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
get_current_dir_name() can return a variety of errors, not just ENOMEM,
hence don't blindly turn its errors to ENOMEM, but return correct errors
in path_make_absolute_cwd().
This trickles down into a couple of other functions, some of which
receive unrelated minor fixes too with this commit.
|
|
This adds support for caching harddisk passwords in the kernel keyring
if it is available, thus supporting caching without Plymouth being
around.
This is also useful for hooking up "gdm-auto-login" with the collected
boot-time harddisk password, in order to support gnome keyring
passphrase unlocking via the HDD password, if it is the same.
Any passwords added to the kernel keyring this way have a timeout of
2.5min at which time they are purged from the kernel.
|
|
Another Coccinelle patch.
|
|
It's primarily just a property of the Manager object after all, and we
try to refer to PID 1 as "manager" instead of "systemd", hence let's to
stick to this here too.
|
|
With debugging on, sysv-generator would print the full set of
lookup paths for *every* sysv script.
While at it, pass LookupPaths as a pointer in sysv-generator,
and constify it everywhere.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
Generators are different than unit files: they are never automatically
generated, so there's no point in allowing /etc to override /run. On
the other hand, overriding /etc might be useful in some cases.
|
|
Sometimes it is necessary to stop a generator from running. Either
because of a bug, or for testing, or some other reason. The only way
to do that would be to rename or chmod the generator binary, which is
inconvenient and does not survive upgrades. Allow masking and
overriding generators similarly to units and other configuration
files.
For the systemd instance, masking would be more common, rather than
overriding generators. For the user instances, it may also be useful
for users to have generators in $XDG_CONFIG_HOME to augment or
override system-wide generators.
Directories are searched according to the usual scheme (/usr/lib,
/usr/local/lib, /run, /etc), and files with the same name in higher
priority directories override files with the same name in lower
priority directories. Empty files and links to /dev/null mask a given
name.
https://bugs.freedesktop.org/show_bug.cgi?id=87230
|
|
shared/install.c and use it
|
|
Fixup for 718880ba0d 'add a transient user unit directory'.
|
|
This makes this function name similar to user_config_home() and makes
it match the name of the environment variable.
|
|
This patch adds a transient user unit directory under
`$XDG_RUNTIME_DIR/systemd/user/` and stores transient user-instance
units (such as those created by `systemd-run --user`) under there
instead of putting them in $XDG_CONFIG_HOME/systemd/user/.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=67331
|
|
|
|
It can now contain more than one directory, and can be used
to only prepend, not totally override, the normal load path.
|
|
They are unused and unlikely to ever be.
|
|
We already encourage upstreams to keep the default configuration
separate from user customizations for software that is installed in
the system location. Let's allow that separation also for software
that is installed in the home directory.
Some discussion:
http://thread.gmane.org/gmane.comp.sysutils.systemd.devel/19627
|
|
Since 12ed81d9 path_strv_canonicalize_absolute leaves the search list
relative to the given root directory instead of resolving paths to their
true location as the name implies. To better reflect this behavior
rename to the less strongly worded path_strv_resolve.
|
|
If XDG_CONFIG_HOME is set, then we should respect that.
|
|
Running systemctl enable/disable/set-default/... with the --root
option under strace reveals that it accessed various files and
directories in the main fs, and not underneath the specified root.
This can lead to correct results only when the layout and
configuration in the container are identical, which often is not the
case. Fix this by adding the specified root to all file access
operations.
This patch does not handle some corner cases: symlinks which point
outside of the specified root might be interpreted differently than
they would be by the kernel if the specified root was the real root.
But systemctl does not create such symlinks by itself, and I think
this is enough of a corner case not to be worth the additional
complexity of reimplementing link chasing in systemd.
Also, simplify the code in a few places and remove an hypothetical
memory leak on error.
|
|
The conf_files_list family accepts an alternate root path to prefix all
directories in the list but path_strv_canonicalize_uniq doesn't use it.
This results in the suspicious behavior of resolving directory symlinks
based on the contents of / instead of the alternate root.
This adds a prefix argument to path_strv_canonicalize which will now
prepend the prefix, if given, to every path in the list. To avoid
answering what a relative path means when called with a root prefix
path_strv_canonicalize is now path_strv_canonicalize_absolute and only
considers absolute paths. Fortunately all users of already call
path_strv_canonicalize with a list of absolute paths.
|
|
- turn strv_merge into strv_extend_strv.
appending strv b to the end of strv a instead of creating a new strv
- strv_append: remove in favor of strv_extend and strv_push.
- strv_remove: write slightly more elegant
- strv_remove_prefix: remove unused function
- strv_overlap: use strv_contains
- strv_printf: STRV_FOREACH handles NULL correctly
|
|
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
|
|
This partially reverts 7ad94c716d6403233d04c4d37cb14df958c9b65d.
After that commit commands such as "systemctl enable" and friends
printed the search path information multiple times in its output, which
is ugly.
If we want the search paths to be printed at a higher log level, then we
should do this in PID 1 only, i.e. split the printing out of the normal
path lookup logic and invoke that explicitly from PID 1 but not in the
auxiliary tools.
|
|
This introduces a new static list of known attributes and their special
semantics. This means that cgroup attribute values can now be
automatically translated from user to kernel notation for command line
set settings, too.
This also adds proper support for multi-line attributes.
|
|
This can be pretty important for the user, and is not trivial
to figure out in all cases.
Also show failing path in error messages.
|
|
The ability to start a new unit with 'systemctl start ...' should not
depend on whether there are other units in the directory. Previously,
an additional 'systemctl daemon-reload' would be necessary to tell
systemd to update the list of unit lookup paths.
|
