summaryrefslogtreecommitdiff
path: root/src/shared
AgeCommit message (Collapse)Author
2014-06-19coredump: optionally store coredumps on disk, not in the journalLennart Poettering
Introduce a new configuration file /etc/systemd/coredump.conf to configure when to place coredumps in the journal and when on disk. Since the coredumps are quite large, default to storing them only on disk.
2014-06-18networkd: add a number of calls to manipulate in_addr_union structsLennart Poettering
2014-06-18socket-util: introduce in_addr_union similar to sockaddr_union and make use ↵Lennart Poettering
of it everywhere
2014-06-18tmpfiles: add "+" modifier support to b, c, p lines in addition to LLennart Poettering
2014-06-17install: remove unused variableThomas Hindoe Paaboel Andersen
2014-06-17install: improve paths we show the user when enabling/disablingLennart Poettering
2014-06-17conf-files: fix when for --root= logicLennart Poettering
This is based on parts of similar patches from Michael Marineau and Lukas Nykrin, but simply uses strappenda3().
2014-06-17install: simplify symlink --root= logicLennart Poettering
2014-06-17install: "systemctl enable" should be a nop for template units lacking a ↵Lennart Poettering
DefaultInstance= setting
2014-06-17log: don't downgrade log level in non-PID 1 if "quiet" is passed on kernel ↵Lennart Poettering
cmdline "debug" should apply to all tools, but "quiet" only to PID1.
2014-06-17install: make sure that --root= mode doesn't make us consider all units ↵Lennart Poettering
outside of search path
2014-06-17install: make sure "systemctl disable foobar@.service" actually removes all ↵Lennart Poettering
instances
2014-06-17install: introduce new DefaultInstance= field for [Install] sectionsLennart Poettering
The DefaultInstance= name is used when enabling template units when only specifying the template name, but no instance. Add DefaultInstance=tty1 to getty@.service, so that when the template itself is enabled an instance for tty1 is created. This is useful so that we "systemctl preset-all" can work properly, because we can operate on getty@.service after finding it, and the right instance is created.
2014-06-17install: when looking for a unit file for enabling, search for templates ↵Lennart Poettering
only after traversing all search directories Let's always make sure to look in all search directories for the full unit names first, before looking for templates for them.
2014-06-17install: use symlink_atomic() instead of unlink()+symlink() when force ↵Lennart Poettering
creating a symlink
2014-06-17install: various modernizationsLennart Poettering
2014-06-17install: teach preset query logic --root= supportLennart Poettering
2014-06-17install: beef up preset logic to limit to only enable or only disable, and ↵Lennart Poettering
do all-unit preset operations The new "systemctl preset-all" command may now be used to put all installed units back into the enable/disable state the vendor/admin encoded in preset files. Also, introduce "systemctl --preset-mode=enable-only" and "systemctl --preset-mode=disable-only" to only apply the enable or only the disable operations of a "systemctl preset" or "systemctl preset-all" operation. "systemctl preset-all" implements this RFE: https://bugzilla.redhat.com/show_bug.cgi?id=630174
2014-06-17install: simplify and clarify disabling logic for instanced unitsLennart Poettering
2014-06-17install: various modernizationsLennart Poettering
2014-06-17unit-name: various modernizationsLennart Poettering
2014-06-17unit-name: fix detection of unit templates/instancesLennart Poettering
We need to check for the last dot, not the first one in a unit name, for the suffix. Correct that.
2014-06-16util: add realloc_multiply() helperDavid Herrmann
This is similar to malloc_multiply() and friends. It is realloc() with a multiplication-overflow check.
2014-06-16util: fix multiply-alloc helpers with size==0David Herrmann
Passing 0 to malloc() is not required to return NULL. Therefore, don't bail out if "b" is 0. This is not of importance to the existing helpers, but the upcoming realloc_multiply() requires this. To keep consistence, we keep the same behavior for the other helpers.
2014-06-16macro: add DISABLE_WARNING_SHADOWDavid Herrmann
As it turns out, we cannot use _Pragma in compound-statements. Therefore, constructs like MIN(MAX(a, b), x) will warn due to shadowed variable declarations. The DISABLE_WARNING_SHADOW macro can be used to suppress these. Note that using UNIQUE(_var) does not work either as GCC uses the last line of a macro-expansion for __LINE__, therefore, still causing both macros to have the same variables. We could use different variable-names for MIN and MAX, but that just hides the problem and still fails for MIN(something(MIN(a, b)), c). The only working solution is to use __COUNTER__ and pass it pre-evaluated as extra argument to a macro to use as name-prefix. This, however, makes all these macros much more complicated so I'll go with manual DISABLE_WARNING_SHADOW so far.
2014-06-16tmpfiles: add new "L+" command as stronger version of "L", that removes the ↵Lennart Poettering
destination before creating a symlink Also, make use of this for mtab as long as mount insists on creating it even if we invoke it with "-n".
2014-06-16tmpfiles: set up selinux label proeprly when creating fifosLennart Poettering
2014-06-13os-release: define /usr/lib/os-release as fallback for /etc/os-releaseLennart Poettering
The file should have been in /usr/lib/ in the first place, since it describes the OS container in /usr (and not the configuration in /etc), hence, let's support os-release files in /usr/lib as fallback if no version in /etc exists, following the usual override logic. A prior commit already enabled tmpfiles to create /etc/os-release as a symlink to /usr/lib/os-release should it be missing, thus providing nice compatibility with applications only checking in /etc. While it's probably a good idea if all apps check both locations via a fallback logic, it is only necessary in the early boot process, as long as the /etc/os-release symlink has not been restored, in case we boot with an empty /etc.
2014-06-13install: fix invalid free() in unit_file_mask()Andreas Henriksson
int unit_file_mask(...) in ./src/shared/install.c calls get_config_path(...) which can in 4 error cases return without setting "ret", and thus "prefix" can be uninitialized when unit_file_mask(...) finishes (which it does directly after the error is returned from get_config_path(...)).
2014-06-13core: add new ConditionNeedsUpdate= unit conditionLennart Poettering
This new condition allows checking whether /etc or /var are out-of-date relative to /usr. This is the counterpart for the update flag managed by systemd-update-done.service. Services that want to be started once after /usr got updated should use: [Unit] ConditionNeedsUpdate=/etc Before=systemd-update-done.service This makes sure that they are only run if /etc is out-of-date relative to /usr. And that it will be executed after systemd-update-done.service which is responsible for marking /etc up-to-date relative to the current /usr. ConditionNeedsUpdate= will also checks whether /etc is actually writable, and not trigger if it isn't, since no update is possible then.
2014-06-13condition: minor modernizationsLennart Poettering
2014-06-12sysusers: add minimal tool to reconstruct /etc/passwd and /etc/group from ↵Lennart Poettering
static files systemd-sysusers is a tool to reconstruct /etc/passwd and /etc/group from static definition files that take a lot of inspiration from tmpfiles snippets. These snippets should carry information about system users only. To make sure it is not misused for normal users these snippets only allow configuring UID and gecos field for each user, but do not allow configuration of the home directory or shell, which is necessary for real login users. The purpose of this tool is to enable state-less systems that can populate /etc with the minimal files necessary, solely from static data in /usr. systemd-sysuser is additive only, and will never override existing users. This tool will create these files directly, and not via some user database abtsraction layer. This is appropriate as this tool is supposed to run really early at boot, and is only useful for creating system users, and system users cannot be stored in remote databases anyway. The tool is also useful to be invoked from RPM scriptlets, instead of useradd. This allows moving from imperative user descriptions in RPM to declarative descriptions. The UID/GID for a user/group to be created can either be chosen dynamic, or fixed, or be read from the owner of a file in the file system, in order to support reconstructing the correct IDs for files that shall be owned by them. This also adds a minimal user definition file, that should be sufficient for most basic systems. Distributions are expected to patch these files and augment the contents, for example with fixed UIDs for the users where that's necessary.
2014-06-10tmpfiles: get rid of "m" lines, make them redundant by "z"Lennart Poettering
"m" so far has been a non-globbing version of "z". Since this makes it quite redundant, let's get rid of it. Remove "m" from the man pages, beef up "z" docs instead, and make "m" nothing more than a compatibility alias for "z".
2014-06-10tmpfiles: add new "C" line for copying files or directoriesLennart Poettering
2014-06-10label: when clearing selinux context, don't mangle errnoLennart Poettering
2014-06-10log: honour the kernel's quiet cmdline argumentRonny Chevalier
It was forgotten in b1e90ec515408aec2702522f6f68c4920b56375b See https://bugs.freedesktop.org/show_bug.cgi?id=79582
2014-06-10systemd-detect-virt: only discover Xen domUThomas Blume
The current vm detection lacks the distinction between Xen dom0 and Xen domU. Both, dom0 and domU are running inside the hypervisor. Therefore systemd-detect-virt and the ConditionVirtualization directive detect dom0 as a virtual machine. dom0 is not using virtual devices but is accessing the real hardware. Therefore dom0 should be considered the virtualisation host and not a virtual machine. https://bugs.freedesktop.org/show_bug.cgi?id=77271
2014-06-10bus-proxy: properly index policy by uid/gid when parsingLennart Poettering
2014-06-06bus: add basic dbus1 policy parserLennart Poettering
Enforcement is still missing, but at least we can parse it now.
2014-06-06namespace: beef up read-only bind mount logicLennart Poettering
Instead of blindly creating another bind mount for read-only mounts, check if there's already one we can use, and if so, use it. Also, recursively mark all submounts read-only too. Also, ignore autofs mounts when remounting read-only unless they are already triggered.
2014-06-05namespace: when setting up an inaccessible mount point, unmounting ↵Lennart Poettering
everything below This has the benefit of not triggering any autofs mount points unnecessarily.
2014-06-05util: fix fd_cloexec(), fd_nonblock()Lennart Poettering
2014-06-05sd-daemon: introduce sd_pid_notify() and sd_pid_notifyf()Lennart Poettering
sd_pid_notify() operates like sd_notify(), however operates on a different PID (for example the parent PID of a process). Make use of this in systemd-notify, so that message are sent from the PID specified with --pid= rather than the usually shortlived PID of systemd-notify itself. This should increase the likelyhood that PID 1 can identify the cgroup that the notification message was sent from properly.
2014-06-05kdbus: when uploading bus name policy, resolve users/groups out-of-processLennart Poettering
It's not safe invoking NSS from PID 1, hence fork off worker processes that upload the policy into the kernel for busnames.
2014-06-05socket: add SocketUser= and SocketGroup= for chown()ing sockets in the file ↵Lennart Poettering
system This is relatively complex, as we cannot invoke NSS from PID 1, and thus need to fork a helper process temporarily.
2014-06-04socket: optionally remove sockets/FIFOs in the file system after useLennart Poettering
2014-06-04bus-proxy: drop priviliges if we canLennart Poettering
Either become uid/gid of the client we have been forked for, or become the "systemd-bus-proxy" user if the client was root. We retain CAP_IPC_OWNER so that we can tell kdbus we are actually our own client.
2014-06-03shared: capability - don't loop over the cap bits if they are all unsetTom Gundersen
2014-06-03shared: allow drop_priviliges to drop all privsTom Gundersen
2014-06-01timesyncd: split privilege dropping code out of timesyncd so that we can ↵Lennart Poettering
make use of it from other daemons too This is preparation to make networkd work as unpriviliged user.