| Age | Commit message (Collapse) | Author |
|---|
|
Avoid pulling-in selinux for tools which just create directories
but not need to fix the selinux label.
|
|
Previously, the logging sockets were asynchronous and if clogged we'd
lose messages. We did this to be extra careful given that PID 1 might
need to spawn the logging daemon as response to PID 1's own log messages
and we really should avoid a deadlock in that case.
As it turns out this causes loss of too many messages, hence make the
socket blocking again, however put a time limit on it to avoid unbounded
deadlocks in the unlikely case they happen.
https://bugs.freedesktop.org/show_bug.cgi?id=66664
|
|
|
|
|
|
|
|
Example:
2013-07-18T10:10:01+0200 sandworm CROND[20957]: (root) CMD (/usr/lib64/sa/sa1 1 1)
|
|
|
|
If we pass a variable to open()'s flags parameter it really wants a mode
parameter too, otherwise some gcc version whine. Hence, pass 0 in that
case.
|
|
|
|
If you have a ASCII only terminal, there is no way to set the charmap to
ANSI_X3.4-1968, other than using LC_CTYPE=C.
We don't want to assume a UTF-8 capable terminal in this case and only
do so, if LANG, LC_ALL and LC_CTYPE are unset.
|
|
Jan: test-tables fails on my system. The one it's failing on is:
syscall: 222 → (null) → -1
... and indeed, our own tables should not have holes, but syscall
tables certainly might.
|
|
In a User-Mode Linux session:
$ systemd-detect-virt
none
Although it is possible to reliably detect virtualization:
$ cat /proc/cpuinfo
processor : 0
vendor_id : User Mode Linux
model name : UML
mode : skas
host : Linux kytes 3.11.0-rc1-00009-ge5fd680 (...)
bogomips : 7007.43
So, grep for the string "\nvendor_id\t: User Mode Linux\n" in
/proc/cpuinfo, and say "uml" when asked.
|
|
I think this is the most important of the capabilities bitmasks to log.
|
|
ncp is also used for Netware mount point, recognize it as such. Fixes
https://bugzilla.novell.com/show_bug.cgi?id=828905.
|
|
Assertion 'p' failed at src/shared/path-util.c:51, function path_get_file_name(). Aborting.
The unit file could not be found, and i->path would not be set.
In 02b9e969 a code path was added which attempts to remove symlinks
to a nonexistent (removed) unit file. This worked OK in case of
non-instance services, but broke in the case of instance services.
Behaviour wrt. to instance units is changed in the way that 02b9e969
changed it for non-instance units: it is now possible to remove
instance symlinks to a template unit that has been removed.
This patch isn't a full fix, because the behaviour wrt. to enabling
and disabling instance units is still broken: e.g it is possible to
start autovt@tty5.service, but it is not possible to enable it,
because autovt@.service is a symlink, and on the other hand, disabling
getty@tty5.service removes all symlinks to getty@.service, which is
wrong too. But segfaults make bad pr, so let's add at least this
partial fix for now.
|
|
|
|
Before, "systemctl reenable getty@tty1.service" would fail with:
Failed to issue method call: File exists
To fix this, reimplement "reenable" explicitly as a disable followed by
an enable.
This is shorter and is how the man page documents its behavior.
|
|
We lost the reference when setting path second time.
|
|
Previously for an instantiated unit foo@bar.service we created a cgroup
foo@.service/foo@bar.service, in order to place all instances of the
same template inside the same subtree. As we now implicitly add all
instantiated units into one per-template slice we don't need this
complexity anymore, and instance units can map directly to the cgroups
of their full name.
|
|
|
|
|
|
When we issue a reexecution request via the private socket we need to
expect a "Disconnected" in addition to "NoReply" when the connection is
terminated.
|
|
|
|
The tests check if the tables have entries for all values
in the enum, and that the entries are unique.
|
|
During shutdown, when we try to clean up all remaining processes, the
kernel will fork new agents every time a cgroup runs empty. These
new processes cause delays in the final SIGTERM, SIGKILL logic.
Apart from that, this should also avoid that the kernel-forked binaries
cause unpredictably timed access to the filesystem which we might need to
unmount.
|
|
The affected files in this patch had inconsistent use of tabs vs. spaces
for indentation, and this patch eliminates the stray tabs.
Also, the opening brace of sigchld_hdl() in activate.c was moved so the
opening braces are consistent throughout the file.
|
|
The kernel adds those when the file is deleted,
but we don't really care if the file is still there
or not. The downside is that if the filename ends
in ' (deleted)', this part of the filename will be
removed. Too bad.
|
|
Use proper grammar, word usage, adjective hyphenation, commas,
capitalization, spelling, etc.
To improve readability, some run-on sentences or sentence fragments were
revised.
[zj: remove the space from 'file name', 'host name', and 'time zone'.]
|
|
|
|
In order to prepare things for the single-writer cgroup scheme, let's
make logind use systemd's own primitives for cgroup management.
Every login user now gets his own private slice unit, in which his sessions
live in a scope unit each. Also, add user@$UID.service to the same
slice, and implicitly start it on first login.
|
|
|
|
"Scope" units are very much like service units, however with the
difference that they are created from pre-existing processes, rather
than processes that systemd itself forks off. This means they are
generated programmatically via the bus API as transient units rather
than from static configuration read from disk. Also, they do not provide
execution-time parameters, as at the time systemd adds the processes to
the scope unit they already exist and the parameters cannot be applied
anymore.
The primary benefit of this new unit type is to create arbitrary cgroups
for worker-processes forked off an existing service.
This commit also adds a a new mode to "systemd-run" to run the specified
processes in a scope rather then a transient service.
|
|
Transient units can be created via the bus API. They are configured via
the method call parameters rather than on-disk files. They are subject
to normal GC. Transient units currently may only be created for
services (however, we will extend this), and currently only ExecStart=
and the cgroup parameters can be configured (also to be extended).
Transient units require a unique name, that previously had no
configuration file on disk.
A tool systemd-run is added that makes use of this functionality to run
arbitrary command lines as transient services:
$ systemd-run /bin/ping www.heise.de
Will cause systemd to create a new transient service and run ping in it.
|
|
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
|
When looking at verbose output, additional "work" is required to
pick out the interesting MESSAGE= lines from all the fields.
Also, show long fields in full in verbose output mode when
OUTPUT_FULL_WIDTH is specified.
|
|
Replace mallocs with alloca while at it.
|
|
Before we only checked the MESSAGE_ID and COREDUMP_UNIT.
Those are both user-controlled fields.
For COREDUMP_USER_UNIT, relax the rules a bit, and also
allow messages from _UID=0.
|
|
|
|
|
|
In 31f7bf1 "logs-show: print multiline messages", I forgot
to take into account the fact that --all implies --full for
journalctl.
|
|
- This changes all logind cgroup objects to use slice objects rather
than fixed croup locations.
- logind can now collect minimal information about running
VMs/containers. As fixed cgroup locations can no longer be used we
need an entity that keeps track of machine cgroups in whatever slice
they might be located. Since logind already keeps track of users,
sessions and seats this is a trivial addition.
- nspawn will now register with logind and pass various bits of metadata
along. A new option "--slice=" has been added to place the container
in a specific slice.
- loginctl gained commands to list, introspect and terminate machines.
- user.slice and machine.slice will now be pulled in by logind.service,
since only logind.service requires this slice.
|
|
In order to prepare for the kernel cgroup rework, let's introduce a new
unit type to systemd, the "slice". Slices can be arranged in a tree and
are useful to partition resources freely and hierarchally by the user.
Each service unit can now be assigned to one of these slices, and later
on login users and machines may too.
Slices translate pretty directly to the cgroup hierarchy, and the
various objects can be assigned to any of the slices in the tree.
|
|
This is useful for debugging and feels pretty natural. For example
answering the question "is this big .journal file worth keeping?"
is made easier.
|
|
|
|
AND term usually don't have many subterms (4 seems to be the maximum
sensible number, e.g. _BOOT_ID && _SYSTEMD_UNIT && _PID && MESSAGE_ID).
Nevertheless, the cost of checking each subterm can be relatively
high, especially when the nested terms are compound, and it
makes sense to minimize the number of checks.
Instead of looping to the end and then again over the whole list once
again after at least one term changed the offset, start the loop at
the term which caused the change. This way ½ terms in the AND match
are not checked unnecessarily again.
|
|
This is the just the library part.
SD_JOURNAL_CURRENT_USER flags is added to sd_j_open(), to open
files from current user.
SD_JOURNAL_SYSTEM_ONLY is renamed to SD_JOURNAL_SYSTEM,
and changed to mean to (also) open system files. This way various
flags can be combined, which gives them nicer semantics, especially
if other ones are added later.
Backwards compatibility is kept, because SD_JOURNAL_SYSTEM_ONLY
is equivalent to SD_JOURNAL_SYSTEM if used alone, and before there
we no other flags.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=65382
https://bugs.gentoo.org/472060?id=472060
|
|
$ journalctl -o verbose _EXE=/quiet/binary -f
-- Logs begin at Sun 2013-03-17 17:28:22 EDT. --
Failed to get realtime timestamp: Cannot assign requested address
JOURNAL_FOREACH_DATA_RETVAL is added, which allows the caller
to get the return value from sd_journal_enumerate_data. I think
we might want to expose this macro like SD_JOURNAL_FOREACH_DATA,
but for now it is in journal-internal.h.
There's a change in behaviour for output_*, not only in
output_verbose, that errors in sd_j_enumerate_data are not silently
ignored anymore.
https://bugs.freedesktop.org/show_bug.cgi?id=56459
|
|
Without this you have to use %40 with the -H flag because dbus doesn't
like the @ sign being unescaped.
|
