| Age | Commit message (Collapse) | Author |
|---|
|
Let's make the suffix it appends configurable. This way we can reuse it at a second place.
|
|
Let's modernize these calls a bit.
Also, don't call them from user_dirs() anymore, as we already have both dirs in
the list a second time via the persistent_config and runtime_config function
parameters.
|
|
user_runtime_dir() and user_config_home() are not used externally anymore,
hence let's not export them anymore.
|
|
Move this into a function of its own, so that we can run it after we ran the
generators, so that it takes into account removed generator dirs.
|
|
functions
|
|
Previously, transient units were created below the normal runtime directory
/run/systemd/system. With this change they are created in a special transient
directory /run/systemd/transient, which only contains data for transient units.
This clarifies the life-cycle of transient units, and makes clear they are
distinct from user-provided runtime units. In particular, users may now
extend transient units via /run/systemd/system, without systemd interfering
with the life-cycle of these files.
This change also adds code so that when a transient unit exits only the
drop-ins in this new directory are removed, but nothing else.
Fixes: #2139
|
|
After all, for test builds they might differ from /etc/systemd/{user|system},
hence they should be included.
|
|
We use the root directory parameter while putting together the LookupPaths
structure, hence let's also store it in the structure as-is. That way we can
drop a parameter from half of the functions in install.c
Also, let's move the validation of the root paths into lookup_paths_init() so
that we can drop even more code from install.c
|
|
Similar to the other calls that operate on the collected path data.
|
|
This way the funciton name matches nicely our other calls path_is_config() and
path_is_runtime().
|
|
configuration
Let's actually check the runtime config dir, instead of just /run.
|
|
Previously, we had two enums ManagerRunningAs and UnitFileScope, that were
mostly identical and converted from one to the other all the time. The latter
had one more value UNIT_FILE_GLOBAL however.
Let's simplify things, and remove ManagerRunningAs and replace it by
UnitFileScope everywhere, thus making the translation unnecessary. Introduce
two new macros MANAGER_IS_SYSTEM() and MANAGER_IS_USER() to simplify checking
if we are running in one or the user context.
|
|
Now that the LookupPaths structure contains the directory paths, let's make use
of that everywhere instead of duplicating the logic.
|
|
Let's add a seperate fields for the directories where we place runtime and
persistent configuration, so that we can use this in install.c (to be added in
a later commit), and we store path information in the same place everywhere.
|
|
Let's be precise when the user tries to invoke an "enable" operation on a
generated unit file.
|
|
Now that we store the generator directories in LookupPaths we can use this to
intrdouce a new unit file state called "generated", for units in these
directories.
Fixes: #2348
|
|
A long time ago – when generators where first introduced – the directories for
them were randomly created via mkdtemp(). This was changed later so that they
use fixed name directories now. Let's make use of this, and add the genrator
dirs to the LookupPaths structure and into the unit file search path maintained
in it. This has the benefit that the generator dirs are now normal part of the
search path for all tools, and thus are shown in "systemctl list-unit-files"
too.
|
|
We don't need it anymore, give that sysv-generator can determine the path on
its own now.
|
|
All callers of create_symlink(), such as install_info_symlink_wants(), expect
that to return > 0 if it actually did something, and then return that number.
unit_file_enable() uses that to determine if any action was done
(carries_install_info != 0) and if not, show a "The unit files have no
[Install] section" warning.
Return 1 instead of 0 in the two code paths of create_symlink() when the link
was created or replaced with a new value.
This fixes getting a bogus "No [Install] section" warning when enabling a unit
with full path, like "systemctl enable /some/path/myunit.service".
|
|
Add `--value` option to systemctl and loginctl to only print values
|
|
|
|
On the server side we already bypass the polkit checks if the caller is root
(see the sd_bus_query_sender_privilege() call in bus_verify_polkit_async()). So
there is no reason to invoke polkit when running
systemctl/machinectl/loginctl/timedatectl as root.
Fixes #2748
|
|
With this option, systemctl will only print the rhs in show:
$ systemctl show -p Wants,After systemd-journald --value
systemd-journald.socket ...
systemd-journald-dev-log.socket ...
This is useful in scripts, because the need to call awk or similar
is removed.
|
|
Fix copy&paste bug in map_basic() to use the correct data type for
SD_BUS_TYPE_UINT32. Before we were copying the wrong 32 bits into the
destination pointer, resulting in complete garbage on big-endian systems.
Fixes #2927
|
|
build-sys: fix build with libgrcypt disabled
|
|
|
|
- Move gcrypt.h include inside grcrypt-util.h.
- Allow gcrypt-util.[ch] to be compiled even without gcrypt.
This allows the logic in files using gcrypt to be simplified.
- Fix compilation of systemd-resolve without gcrypt.
systemd-resolved already supported that.
Fixes #2711.
|
|
Fixes #2823.
Also remove unnecessary feof check.
|
|
Fixes:
Message: Process 806 (systemd-importd) of user 0 dumped core.
Stack trace of thread 806:
#0 0x00007f5eaeff7227 raise (libc.so.6)
#1 0x00007f5eaeff8e8a abort (libc.so.6)
#2 0x000055b6d3418f4f log_assert_failed (systemd-importd)
#3 0x000055b6d3409daf safe_close (systemd-importd)
#4 0x000055b6d33c25ea closep (systemd-importd)
#5 0x000055b6d33c38d9 setup_machine_directory (systemd-importd)
#6 0x000055b6d33b8536 method_pull_tar_or_raw (systemd-importd)
#7 0x000055b6d33ed097 method_callbacks_run (systemd-importd)
#8 0x000055b6d33ef929 object_find_and_run (systemd-importd)
#9 0x000055b6d33eff6b bus_process_object (systemd-importd)
#10 0x000055b6d3447f77 process_message (systemd-importd)
#11 0x000055b6d344815a process_running (systemd-importd)
#12 0x000055b6d3448a10 bus_process_internal (systemd-importd)
#13 0x000055b6d3448ae1 sd_bus_process (systemd-importd)
#14 0x000055b6d3449779 time_callback (systemd-importd)
#15 0x000055b6d3454ff4 source_dispatch (systemd-importd)
#16 0x000055b6d34562b9 sd_event_dispatch (systemd-importd)
#17 0x000055b6d34566f8 sd_event_run (systemd-importd)
#18 0x000055b6d33ba72a bus_event_loop_with_idle (systemd-importd)
#19 0x000055b6d33b95bc manager_run (systemd-importd)
#20 0x000055b6d33b9766 main (systemd-importd)
#21 0x00007f5eaefe2a00 __libc_start_main (libc.so.6)
#22 0x000055b6d33b5569 _start (systemd-importd)
|
|
binary_is_good translates ENOENT to 0
See https://github.com/systemd/systemd/commit/85eca92e#diff-bcad68c477b6651521e880c40b7a9b40R813
|
|
Enable more tests by default, and even more with `--enable-tests=unsafe`
|
|
|
|
This data is simply missing on non-UEFI systems, and it is useful
to distinguish that from corrupted data.
|
|
tree-wide: merge pager_open_if_enabled() to the pager_open()
|
|
Many subsystems define own pager_open_if_enabled() function which
checks '--no-pager' command line argument and open pager depends
on its value. All implementations of pager_open_if_enabled() are
the same. Let's merger this function with pager_open() from the
shared/pager.c and remove pager_open_if_enabled() from all subsytems
to prevent code duplication.
|
|
|
|
|
|
tree-wide: make ++/-- usage consistent WRT spacing
|
|
Throughout the tree there's spurious use of spaces separating ++ and --
operators from their respective operands. Make ++ and -- operator
consistent with the majority of existing uses; discard the spaces.
|
|
After all, it is pretty generic, has no external deps besides libc, and is very
similar to virt.[ch] which is also in basic/
|
|
Usually, we place the #pragma once before the copyright blurb in header files,
but in a few cases we didn't. Move those around, so that we do the same thing
everywhere.
|
|
|
|
Followup for 4524439edb7d.
|
|
https://github.com/systemd/systemd/issues/2431
Some newlines are added, but the output will still exceed 80 columns in many
cases. The fallback for oom conditions is changed from "n/a" to something
"<service>", and a similar pattern is used for the new code. This way we
have a realistic fallback for oom, which seems nicer than making the whole
function return an error code which would then have to be propagated.
$ systemctl -M fedora-rawhide restart systemd-networkd.service
Job for systemd-networkd.service failed because start of the service was attempted too often.
See "systemctl -M fedora-rawhide status systemd-networkd.service" and "journalctl -M fedora-rawhide -xe" for details.
To force a start use "systemctl -M fedora-rawhide reset-failed systemd-networkd.service"
followed by "systemctl -M fedora-rawhide start systemd-networkd.service" again.
|
|
Better support of OPENPGPKEY, CAA, TLSA packets and tests
|
|
|
|
$ systemd-resolve --openpgp zbyszek@fedoraproject.org
d08ee310438ca124a6149ea5cc21b6313b390dce485576eff96f8722._openpgpkey.fedoraproject.org. IN OPENPGPKEY
mQINBFBHPMsBEACeInGYJCb+7TurKfb6wGyTottCDtiSJB310i37/6ZYoeIay/5soJjlM
yfMFQ9T2XNT/0LM6gTa0MpC1st9LnzYTMsT6tzRly1D1UbVI6xw0g0vE5y2Cjk3xUwAyn
...
|
|
It's annoying to have the exact same function in three places.
It's stored in src/shared, but it's not added to the library to
avoid the dependency on libgcrypt.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
This clean-ups timeout handling in PID 1. Specifically, instead of storing 0 in internal timeout variables as
indication for a disabled timeout, use USEC_INFINITY which is in-line with how we do this in the rest of our code
(following the logic that 0 means "no", and USEC_INFINITY means "never").
This also replace all usec_t additions with invocations to usec_add(), so that USEC_INFINITY is properly propagated,
and sd-event considers it has indication for turning off the event source.
This also alters the deserialization of the units to restart timeouts from the time they were originally started from.
Before this patch timeouts would be restarted beginning with the time of the deserialization, which could lead to
artificially prolonged timeouts if a daemon reload took place.
Finally, a new RuntimeMaxSec= setting is introduced for service units, that specifies a maximum runtime after which a
specific service is forcibly terminated. This is useful to put time limits on time-intensive processing jobs.
This also simplifies the various xyz_spawn() calls of the various types in that explicit distruction of the timers is
removed, as that is done anyway by the state change handlers, and a state change is always done when the xyz_spawn()
calls fail.
Fixes: #2249
|
