summaryrefslogtreecommitdiff
path: root/src/shared
AgeCommit message (Collapse)Author
2016-08-05util-lib: unify parsing of nice level valuesLennart Poettering
This adds parse_nice() that parses a nice level and ensures it is in the right range, via a new nice_is_valid() helper. It then ports over a number of users to this. No functional changes.
2016-08-04util-lib: add parse_percent_unbounded() for percentages over 100% (#3886)David Michael
This permits CPUQuota to accept greater values as documented.
2016-08-03journalctl: add new output mode "short-full" (#3880)Lennart Poettering
This new output mode formats all timestamps using the usual format_timestamp() call we use pretty much everywhere else. Timestamps formatted this way are some ways more useful than traditional syslog timestamps as they include weekday, month and timezone information, while not being much longer. They are also not locale-dependent. The primary advantage however is that they may be passed directly to journalctl's --since= and --until= switches as soon as #3869 is merged. While we are at it, let's also add "short-unix" to shell completion.
2016-07-25Merge pull request #3728 from poettering/dynamic-usersZbigniew Jędrzejewski-Szmek
2016-07-25shared/install: allow "enable" on linked unit files (#3790)Zbigniew Jędrzejewski-Szmek
User expectations are broken when "systemctl enable /some/path/service.service" behaves differently to "systemctl link ..." followed by "systemctl enable". From user's POV, "enable" with the full path just combines the two steps into one. Fixes #3010.
2016-07-22Use "return log_error_errno" in more places"Zbigniew Jędrzejewski-Szmek
2016-07-22core: add a concept of "dynamic" user ids, that are allocated as long as a ↵Lennart Poettering
service is running This adds a new boolean setting DynamicUser= to service files. If set, a new user will be allocated dynamically when the unit is started, and released when it is stopped. The user ID is allocated from the range 61184..65519. The user will not be added to /etc/passwd (but an NSS module to be added later should make it show up in getent passwd). For now, care should be taken that the service writes no files to disk, since this might result in files owned by UIDs that might get assigned dynamically to a different service later on. Later patches will tighten sandboxing in order to ensure that this cannot happen, except for a few selected directories. A simple way to test this is: systemd-run -p DynamicUser=1 /bin/sleep 99999
2016-07-22core: rename MemoryLimitByPhysicalMemory transient property to MemoryLimitScaleLennart Poettering
That way, we can neatly keep this in line with the new TasksMaxScale= option. Note that we didn't release a version with MemoryLimitByPhysicalMemory= yet, hence this change should be unproblematic without breaking API.
2016-07-22core: support percentage specifications on TasksMax=Lennart Poettering
This adds support for a TasksMax=40% syntax for specifying values relative to the system's configured maximum number of processes. This is useful in order to neatly subdivide the available room for tasks within containers.
2016-07-20conf-parser: minor coding style improvementsLennart Poettering
2016-07-19Merge pull request #3685 from kinvolk/alessandro/inaccessible-pathsLennart Poettering
namespace: unify limit behavior on non-directory paths
2016-07-19doc,core: Read{Write,Only}Paths= and InaccessiblePaths=Alessandro Puccetti
This patch renames Read{Write,Only}Directories= and InaccessibleDirectories= to Read{Write,Only}Paths= and InaccessiblePaths=, previous names are kept as aliases but they are not advertised in the documentation. Renamed variables: `read_write_dirs` --> `read_write_paths` `read_only_dirs` --> `read_only_paths` `inaccessible_dirs` --> `inaccessible_paths`
2016-07-19journalctl: make sure that journalctl's --all switch also has an effect on ↵Lennart Poettering
json output With this change, binary record data is formatted as string if --all is specified when using json output. This is inline with the effect of --all on the other available output modes. Fixes: #3416
2016-07-17basic/strv: add an extra NUL after strings in strv_make_nulstrZbigniew Jędrzejewski-Szmek
strv_make_nulstr was creating a nulstr which was not a valid nulstr, because it was missing the terminating NUL. This didn't cause any issues, because strv_parse_nulstr correctly parsed the result, using the separately specified length. But it's confusing to have something called nulstr which really isn't. It is likely that somebody will try to use strv_make_nulstr() in some other place, incorrectly. This patch changes strv_parse_nulstr() to produce a valid nulstr, and changes the output length parameter to be the minimum number of bytes which can be later on parsed by strv_parse_nulstr(). This allows the only user in ask-password-api to be slightly simplified. Based-on-patch-by: Jean-Sébastien Bour <jean-sebastien@bour.name> Fixes #3689.
2016-07-11treewide: fix typos and remove accidental repetition of wordsTorstein Husebø
2016-06-30Fix #3236 (#3633)Lennart Poettering
* networkd: condition_test() can return a negative error, handle that If a condition check fails with an error we should not consider the check successful. Fix that. We should probably also improve logging in this case, but for now, let's just unbreak this breakage. Fixes: #3236 * condition: handle unrecognized architectures nicer When we encounter a check for an architecture we don't know we should not let the condition check fail with an error code, but instead simply return false. After all the architecture might just be newer than the ones we know, in which case it's certainly not our local one. Fixes: #3236
2016-06-24Merge pull request #3549 from poettering/resolved-moreTom Gundersen
resolved: more fixes, among them "systemctl-resolve --status" to see DNS configuration in effect, and a local DNS stub listener on 127.0.0.53
2016-06-23build-sys: move fdset.[ch] src/basic → src/shared (#3580)Lennart Poettering
It makes use of the sd_listen_fds() call, and as such should live in src/shared, as the distinction between src/basic and src/shared is that the latter may use libsystemd APIs, the former does not. Note that btrfs-util.[ch] and log.[ch] also include header files from libsystemd, but they only need definitions, they do not invoke any function from it. Hence they may stay in src/basic.
2016-06-21Do not ellipsize cgroups when showing slices in --full mode (#3560)Ian Lee
Do not ellipsize cgroups when showing slices in --full mode
2016-06-21sd-bus: make sure bus_map_all_properties() handle booleans rightLennart Poettering
sd-bus generally exposes bools as "int" instead of "bool" in the public API. This is relevant when unmarshaling booleans, as the relevant functions expect an int* pointer and no bool* pointer. Since sizeof(bool) is not necessarily the same as sizeof(int) this is problematic and might result in memory corruption. Let's fix this, and make sure bus_map_all_properties() handles booleans as ints, as the rest of sd-bus, and make all users of it expect the right thing.
2016-06-18Ensure kdbus isn't used (#3501)Dave Reisner
Delete the dbus1 generator and some critical wiring. This prevents kdbus from being loaded or detected. As such, it will never be used, even if the user still has a useful kdbus module loaded on their system. Sort of fixes #3480. Not really, but it's better than the current state.
2016-06-16Merge pull request #3481 from poettering/relative-memcgLennart Poettering
various changes, most importantly regarding memory metrics
2016-06-15load-fragment: ignore ENOTDIR/EACCES errors (#3510)Zbigniew Jędrzejewski-Szmek
If for whatever reason the file system is "corrupted", we want to be resilient and ignore the error, as long as we can load the units from a different place. Arch bug https://bugs.archlinux.org/task/49547. A user had an ntfs symlink (essentially a file) instead of a directory after restoring from backup. We should just ignore that like we would treat a missing directory, for general resiliency. We should treat permission errors similarly. For example an unreadable /usr/local/lib directory would prevent (user) instances of systemd from loading any units. It seems better to continue.
2016-06-14systemctl: allow percent-based MemoryLimit= settings via systemctl set-propertyLennart Poettering
The unit files already accept relative, percent-based memory limit specification, let's make sure "systemctl set-property" support this too. Since we want the physical memory size of the destination machine to apply we pass the percentage in a new set of properties that only exist for this purpose, and can only be set.
2016-06-14util-lib: introduce parse_percent() for parsing percent specificationsLennart Poettering
And port a couple of users over to it.
2016-06-13core: improve seccomp syscall grouping a bitLennart Poettering
This adds three new seccomp syscall groups: @keyring for kernel keyring access, @cpu-emulation for CPU emulation features, for exampe vm86() for dosemu and suchlike, and @debug for ptrace() and related calls. Also, the @clock group is updated with more syscalls that alter the system clock. capset() is added to @privileged, and pciconfig_iobase() is added to @raw-io. Finally, @obsolete is a cleaned up. A number of syscalls that never existed on Linux and have no number assigned on any architecture are removed, as they only exist in the man pages and other operating sytems, but not in code at all. create_module() is moved from @module to @obsolete, as it is an obsolete system call. mem_getpolicy() is removed from the @obsolete list, as it is not obsolete, but simply a NUMA API.
2016-06-09networkd: clean up vlan handling a bit (#3478)Lennart Poettering
Let's add a generic parser for VLAN ids, which should become handy as preparation for PR #3428. Let's also make sure we use uint16_t for the vlan ID type everywhere, and that validity checks are already applied at the time of parsing, and not only whne we about to prepare a netdev. Also, establish a common definition VLANID_INVALID we can use for non-initialized VLAN id fields.
2016-06-09bus_util: add support to map double (#3479)Susant Sahani
Now we don't support parsing double at map_basic. when trying to use bus_message_map_all_properties with a double this fails. Let's add it.
2016-06-04Merge pull request #3392 from poettering/assorted-stuffZbigniew Jędrzejewski-Szmek
Assorted stuff
2016-06-03core: Restrict mmap and mprotect with PAGE_WRITE|PAGE_EXEC (#3319) (#3379)Topi Miettinen
New exec boolean MemoryDenyWriteExecute, when set, installs a seccomp filter to reject mmap(2) with PAGE_WRITE|PAGE_EXEC and mprotect(2) with PAGE_EXEC.
2016-06-03core: always use "infinity" for no upper limit instead of "max" (#3417)Tejun Heo
Recently added cgroup unified hierarchy support uses "max" in configurations for no upper limit. While consistent with what the kernel uses for no upper limit, it is inconsistent with what systemd uses for other controllers such as memory or pids. There's no point in introducing another term. Update cgroup unified hierarchy support so that "infinity" is the only term that systemd uses for no upper limit.
2016-06-01core: add pre-defined syscall groups to SystemCallFilter= (#3053) (#3157)Topi Miettinen
Implement sets of system calls to help constructing system call filters. A set starts with '@' to distinguish from a system call. Closes: #3053, #3157
2016-05-30pager: don't start pager if the terminal is explicitly set to TERM=dumbLennart Poettering
As suggested here: https://bugs.freedesktop.org/show_bug.cgi?id=64737#c8 This adds a new call terminal_is_dumb() and makes use of this where appropriate.
2016-05-30tree-wide: check colors_enabled() before outputting ANSI color stringsLennart Poettering
2016-05-27core: add cgroup memory controller support on the unified hierarchy (#3315)Tejun Heo
On the unified hierarchy, memory controller implements three control knobs - low, high and max which enables more useable and versatile control over memory usage. This patch implements support for the three control knobs. * MemoryLow, MemoryHigh and MemoryMax are added for memory.low, memory.high and memory.max, respectively. * As all absolute limits on the unified hierarchy use "max" for no limit, make memory limit parse functions accept "max" in addition to "infinity" and document "max" for the new knobs. * Implement compatibility translation between MemoryMax and MemoryLimit. v2: - Fixed missing else's in config_parse_memory_limit(). - Fixed missing newline when writing out drop-ins. - Coding style updates to use "val > 0" instead of "val". - Minor updates to documentation.
2016-05-26{machine,system}ctl: always pass &changes and &n_changes (#3350)Christian Hesse
We have to pass addresses of changes and n_changes to bus_deserialize_and_dump_unit_file_changes(). Otherwise we are hit by missing information (subsequent calls to unit_file_changes_add() to not add anything). Also prevent null pointer dereference in bus_deserialize_and_dump_unit_file_changes() by asserting. Fixes #3339
2016-05-20Merge pull request #3290 from htejun/cgroup2-io-compatLennart Poettering
Implement compat translation between IO* and BlockIO* settings
2016-05-20Make the fix for net/if.h fuckup even worse (#3287)Zbigniew Jędrzejewski-Szmek
The original conflict is fixed in the kernel in v4.6-rc7-40-g4a91cb61bb, but now our work-around causes a compilation failure. Keep the workaround to support 4.5 kernels for now, and layer more ugliness on top. Tested with: kernel-headers-4.6.0-1.fc25.x86_64 glibc-devel-2.23.90-18.fc25.x86_64 kernel-headers-4.5.4-300.fc24.x86_64 glibc-devel-2.23.1-7.fc24.x86_64 kernel-headers-4.4.9-300.fc23.x86_64 glibc-devel-2.22-16.fc23.x86_64 kernel-headers-4.1.13-100.fc21.x86_64 glibc-devel-2.20-8.fc21.x86_64
2016-05-20core/dbus: expose SELinuxContext property (#3284)Jonathan Boulle
Adds support to core for systemd D-Bus clients to send the `SELinuxContext` property . This means `systemd-run -p SELinuxContext=foo` should now work.
2016-05-18core: introduce CGroupIOLimitType enumsTejun Heo
Currently, there are two cgroup IO limits, bandwidth max for read and write, and they are hard-coded in various places. This is fine for two limits but IO is expected to grow more limits - low, high and max limits for bandwidth and IOPS - and hard-coding each limit won't make sense. This patch replaces hard-coded limits with an array indexed by CGroupIOLimitType and accompanying string and default value tables so that new limits can be added trivially.
2016-05-16Merge pull request #3193 from htejun/cgroup-io-controllerLennart Poettering
core: add io controller support on the unified hierarchy
2016-05-12Create initrd-root-device.target synchronization point (#3239)Daniel Drake
Add a synchronization point so that custom initramfs units can run after the root device becomes available, before it is fsck'd and mounted. This is useful for custom initramfs units that may modify the root disk partition table, where the root device is not known in advance (it's dynamically selected by the generators).
2016-05-10Merge pull request #3220 from keszybz/install-fixesLennart Poettering
Fix "preset-all" with dangling symlinks and install-section hint emitted too eagerly
2016-05-09tree-wide: rename draw_special_char to special_glyphZbigniew Jędrzejewski-Szmek
That function doesn't draw anything on it's own, just returns a string, which sometimes is more than one character. Also remove "DRAW_" prefix from character names, TREE_* and ARROW and BLACK_CIRCLE are unambigous on their own, don't draw anything, and are always used as an argument to special_glyph(). Rename "DASH" to "MDASH", as there's more than one type of dash.
2016-05-09shared/install: use "→" instead of "pointing to" for a symlinkZbigniew Jędrzejewski-Szmek
It's quite a bit shorter and just as readable. (The full sentence with "pointing to" was added to replace a text that used "ln -s %s %s". Using the "ln" syntax is indeed unclear, because it's not obvious which is the source and which is the target, and because symlink(2) uses the opposite order to ln(1). But with the unicode arrow there should be no ambiguity.)
2016-05-09shared/install: do not print warning when a unit is already enabledZbigniew Jędrzejewski-Szmek
Executing 'systemctl enable' on the same unit twice would cause a warning about a missing [Install] section to be printed. To avoid this, count all symlinks that "would" be created, and return 1 no matter if we actually created a symlink or skipped creation because it already exists.
2016-05-09shared/install: handle dangling aliases as an explicit case, report nicelyZbigniew Jędrzejewski-Szmek
This fixes 'preset-all' with a unit that is a dangling symlink. $ systemctl --root=/ preset-all Unit syslog.service is an alias to a unit that is not present, ignoring. Unit auditd.service is masked, ignoring. Unit NetworkManager.service is masked, ignoring.
2016-05-09shared/install: add some more debug messages and commentsZbigniew Jędrzejewski-Szmek
$ systemctl --root=/ preset foobar.service Cannot find unit foobar.service. Failed to preset: No such file or directory. $ systemctl --root=/ preset foobar@.service Cannot find unit foobar@.service. Failed to preset: No such file or directory. $ systemctl --root=/ preset foobar@blah.service Cannot find unit foobar@blah.service or foobar@.service. Failed to preset: No such file or directory.
2016-05-09tree-wide: port more code to use ifname_valid()Lennart Poettering
2016-05-07shared/install: simplify error handling conditionals in a few placesZbigniew Jędrzejewski-Szmek