summaryrefslogtreecommitdiff
path: root/src/shared
AgeCommit message (Collapse)Author
2016-11-01seccomp: allow specifying arm64, mips, ppc (#4491)Zbigniew Jędrzejewski-Szmek
"Secondary arch" table for mips is entirely speculative…
2016-10-27Merge pull request #4442 from keszybz/detect-virt-usernsEvgeny Vereshchagin
detect-virt: add --private-users switch to check if a userns is active; add Condition=private-users
2016-10-26condition: simplify condition_test_virtualizationZbigniew Jędrzejewski-Szmek
Rewrite the function to be slightly simpler. In particular, if a specific match is found (like ConditionVirtualization=yes), simply return an answer immediately, instead of relying that "yes" will not be matched by any of the virtualization names below. No functional change.
2016-10-26shared/condition: add ConditionVirtualization=[!]private-usersZbigniew Jędrzejewski-Szmek
This can be useful to silence warnings about units which fail in userns container.
2016-10-24seccomp: add test-seccomp test toolLennart Poettering
This validates the system call set table and many of our seccomp-util.c APIs.
2016-10-24seccomp: add new helper call seccomp_load_filter_set()Lennart Poettering
This allows us to unify most of the code in apply_protect_kernel_modules() and apply_private_devices().
2016-10-24seccomp: two fixes for the syscall set tablesLennart Poettering
"oldumount()" is not a syscall, but simply a wrapper for it, the actual syscall nr is called "umount" (and the nr of umount() is called umount2 internally). "sysctl()" is not a syscall, but "_syscall()" is. Fix this in the table. Without these changes libseccomp cannot actually translate the tables in full. This wasn't noticed before as the code was written defensively for this case.
2016-10-24seccomp: add new seccomp_init_conservative() helperLennart Poettering
This adds a new seccomp_init_conservative() helper call that is mostly just a wrapper around seccomp_init(), but turns off NNP and adds in all secondary archs, for best compatibility with everything else. Pretty much all of our code used the very same constructs for these three steps, hence unifying this in one small function makes things a lot shorter. This also changes incorrect usage of the "scmp_filter_ctx" type at various places. libseccomp defines it as typedef to "void*", i.e. it is a pointer type (pretty poor choice already!) that casts implicitly to and from all other pointer types (even poorer choice: you defined a confusing type now, and don't even gain any bit of type safety through it...). A lot of the code assumed the type would refer to a structure, and hence aded additional "*" here and there. Remove that.
2016-10-24core: rework syscall filter set handlingLennart Poettering
A variety of fixes: - rename the SystemCallFilterSet structure to SyscallFilterSet. So far the main instance of it (the syscall_filter_sets[] array) used to abbreviate "SystemCall" as "Syscall". Let's stick to one of the two syntaxes, and not mix and match too wildly. Let's pick the shorter name in this case, as it is sufficiently well established to not confuse hackers reading this. - Export explicit indexes into the syscall_filter_sets[] array via an enum. This way, code that wants to make use of a specific filter set, can index it directly via the enum, instead of having to search for it. This makes apply_private_devices() in particular a lot simpler. - Provide two new helper calls in seccomp-util.c: syscall_filter_set_find() to find a set by its name, seccomp_add_syscall_filter_set() to add a set to a seccomp object. - Update SystemCallFilter= parser to use extract_first_word(). Let's work on deprecating FOREACH_WORD_QUOTED(). - Simplify apply_private_devices() using this functionality
2016-10-24update-done: minor clean-upsLennart Poettering
This is a follow-up for fb8b0869a7bc30e23be175cf978df23192d59118, and makes a couple of minor clean-up changes: - The field name in the timestamp file is changed from "TimestampNSec=" to "TIMESTAMP_NSEC=". This is done simply to reflect the fact that we parse the file with the env var file parser, and hence the contents should better follow the usual capitalization of env vars, i.e. be all uppercase. - Needless negation of the errno parameter log_error_errno() and friends has been removed. - Instead of manually calculating the nsec remainder of the timestamp, use timespec_store(). - We now check whether we were able to write the timestamp file in full with fflush_and_check() the way we usually do it.
2016-10-24shared, systemctl: teach is-enabled to show installation targetsJan Synacek
It may be desired by users to know what targets a particular service is installed into. Improve user friendliness by teaching the is-enabled command to show such information when used with --full. This patch makes use of the newly added UnitFileFlags and adds UNIT_FILE_DRY_RUN flag into it. Since the API had already been modified, it's now easy to add the new dry-run feature for other commands as well. As a next step, --dry-run could be added to systemctl, which in turn might pave the way for a long requested dry-run feature when running systemctl start.
2016-10-24install: introduce UnitFileFlagsJan Synacek
Introduce a new enum to get rid of some boolean arguments of unit_file_* functions. It unifies the code, makes it a bit cleaner and extensible.
2016-10-20shared/install: fix %u expansion when running under sudoZbigniew Jędrzejewski-Szmek
Test case: [Install] DefaultInstance=bond1 WantedBy= foobar-U-%U.device WantedBy= foobar-u-%u.device $ sudo systemctl --root=/ enable testing4@.service (before) Created symlink /etc/systemd/system/foobar-U-0.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. Created symlink /etc/systemd/system/foobar-u-zbyszek.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. (after) Created symlink /etc/systemd/system/foobar-U-0.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. Created symlink /etc/systemd/system/foobar-u-root.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. It doesn't make much sense to use a different user for %U and %u.
2016-10-20shared/install: fix DefaultInstance expansion in %n, %NZbigniew Jędrzejewski-Szmek
We should substitute DefaultInstance if the instance is not specified. Test case: [Install] DefaultInstance=bond1 WantedBy= foobar-n-%n.device WantedBy= foobar-N-%N.device $ systemctl --root=/ enable testing4@.service Created symlink /etc/systemd/system/foobar-n-testing4@bond1.service.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. Created symlink /etc/systemd/system/foobar-N-testing4@bond1.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. (before, the symlink would be created with empty %n, %N parts).
2016-10-20shared/install: fix DefaultInstance expansion in %iZbigniew Jędrzejewski-Szmek
We should substitute DefaultInstance if the instance is not specified. Test case: [Install] DefaultInstance=bond1 WantedBy= foobar-i-%i.device $ systemctl --root=/ enable testing4@.service Created symlink /etc/systemd/system/foobar-i-bond1.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. (before, the symlink would be created as /etc/systemd/system/foobar-i-.device.wants/testing4@bond1.service) Fixes #4411.
2016-10-19Merge pull request #4390 from keszybz/install-specifiersLennart Poettering
Various install-related tweaks
2016-10-18shared/install: report invalid unit files slightly betterZbigniew Jędrzejewski-Szmek
When a unit file is invalid, we'd return an error without any details: $ systemctl --root=/ enable testing@instance.service Failed to enable: Invalid argument. Fix things to at least print the offending file name: $ systemctl enable testing@instance.service Failed to enable unit: File testing@instance.service: Invalid argument $ systemctl --root=/ enable testing@instance.service Failed to enable unit, file testing@instance.service: Invalid argument. A real fix would be to pass back a proper error message from conf-parser. But this would require major surgery, since conf-parser functions now simply print log errors, but we would need to return them over the bus. So let's just print the file name, to indicate where the error is. (Incomplete) fix for #4210.
2016-10-18shared/install: resolve specifiers in Also=Zbigniew Jędrzejewski-Szmek
Test case: [Install] WantedBy= default.target Also=getty@%p.service $ ./systemctl --root=/ enable testing@instance.service Created symlink /etc/systemd/system/default.target.wants/testing@instance.service → /etc/systemd/system/testing@.service. Created symlink /etc/systemd/system/getty.target.wants/getty@testing.service → /usr/lib/systemd/system/getty@.service. $ ./systemctl --root=/ disable testing@instance.service Removed /etc/systemd/system/getty.target.wants/getty@testing.service. Removed /etc/systemd/system/default.target.wants/testing@instance.service. Fixes part of #4210. Resolving specifiers in DefaultInstance seems to work too: [Install] WantedBy= default.target DefaultInstance=%u $ systemctl --root=/ enable testing3@instance.service Created symlink /etc/systemd/system/default.target.wants/testing3@instance.service → /etc/systemd/system/testing3@.service. $ systemctl --root=/ enable testing3@.service Created symlink /etc/systemd/system/default.target.wants/testing3@zbyszek.service → /etc/systemd/system/testing3@.service.
2016-10-18shared/install: provide more info if install_info_traverse_failsZbigniew Jędrzejewski-Szmek
Test case: [Install] WantedBy= default.target Also=foobar-unknown.service Before: $ systemctl --root=/ enable testing2@instance.service Failed to enable: No such file or directory. After $ ./systemctl --root=/ enable testing2@instance.service Failed to enable unit, file foobar-unknown.service: No such file or directory.
2016-10-18shared/install: in install_context_mark_for_removal ignore not found unitsZbigniew Jędrzejewski-Szmek
With the following test case: [Install] WantedBy= default.target Also=foobar-unknown.service disabling would fail with: $ ./systemctl --root=/ disable testing.service Cannot find unit foobar-unknown.service. # this is level debug Failed to disable: No such file or directory. # this is the error After the change we proceed: $ ./systemctl --root=/ disable testing.service Cannot find unit foobar-unknown.service. Removed /etc/systemd/system/default.target.wants/testing.service. This does not affect specifying a missing unit directly: $ ./systemctl --root=/ disable nosuch.service Failed to disable: No such file or directory.
2016-10-17shared/install: do not break loop when we enounter a dangling symlinkZbigniew Jędrzejewski-Szmek
We should ignore that unit, but otherwise continue.
2016-10-16tree-wide: introduce free_and_replace helperZbigniew Jędrzejewski-Szmek
It's a common pattern, so add a helper for it. A macro is necessary because a function that takes a pointer to a pointer would be type specific, similarly to cleanup functions. Seems better to use a macro.
2016-10-16tree-wide: use mfree moreZbigniew Jędrzejewski-Szmek
2016-10-16shared/install: use _cleanup_free_Zbigniew Jędrzejewski-Szmek
Also rewrap some comments so that they don't have a very long line and a very short line.
2016-10-12core:sandbox: Add ProtectKernelModules= optionDjalal Harouni
This is useful to turn off explicit module load and unload operations on modular kernels. This option removes CAP_SYS_MODULE from the capability bounding set for the unit, and installs a system call filter to block module system calls. This option will not prevent the kernel from loading modules using the module auto-load feature which is a system wide operation.
2016-10-12Allow block and char classes in DeviceAllow bus properties (#4353)Zbigniew Jędrzejewski-Szmek
Allowed paths are unified betwen the configuration file parses and the bus property checker. The biggest change is that the bus code now allows "block-" and "char-" classes. In addition, path_startswith("/dev") was used in the bus code, and startswith("/dev") was used in the config file code. It seems reasonable to use path_startswith() which allows a slightly broader class of strings. Fixes #3935.
2016-10-11Merge pull request #4348 from poettering/docfixesZbigniew Jędrzejewski-Szmek
Various smaller documentation fixes.
2016-10-11Merge pull request #4067 from poettering/invocation-idZbigniew Jędrzejewski-Szmek
Add an "invocation ID" concept to the service manager
2016-10-11pager: tiny beautificationLennart Poettering
2016-10-10install: let's always refer to the actual setting in errorsLennart Poettering
2016-10-08systemd-resolve: use sha256 for local-part of openpgp key (#4193)Stefan Schweter
2016-10-07core: add "invocation ID" concept to service managerLennart Poettering
This adds a new invocation ID concept to the service manager. The invocation ID identifies each runtime cycle of a unit uniquely. A new randomized 128bit ID is generated each time a unit moves from and inactive to an activating or active state. The primary usecase for this concept is to connect the runtime data PID 1 maintains about a service with the offline data the journal stores about it. Previously we'd use the unit name plus start/stop times, which however is highly racy since the journal will generally process log data after the service already ended. The "invocation ID" kinda matches the "boot ID" concept of the Linux kernel, except that it applies to an individual unit instead of the whole system. The invocation ID is passed to the activated processes as environment variable. It is additionally stored as extended attribute on the cgroup of the unit. The latter is used by journald to automatically retrieve it for each log logged message and attach it to the log entry. The environment variable is very easily accessible, even for unprivileged services. OTOH the extended attribute is only accessible to privileged processes (this is because cgroupfs only supports the "trusted." xattr namespace, not "user."). The environment variable may be altered by services, the extended attribute may not be, hence is the better choice for the journal. Note that reading the invocation ID off the extended attribute from journald is racy, similar to the way reading the unit name for a logging process is. This patch adds APIs to read the invocation ID to sd-id128: sd_id128_get_invocation() may be used in a similar fashion to sd_id128_get_boot(). PID1's own logging is updated to always include the invocation ID when it logs information about a unit. A new bus call GetUnitByInvocationID() is added that allows retrieving a bus path to a unit by its invocation ID. The bus path is built using the invocation ID, thus providing a path for referring to a unit that is valid only for the current runtime cycleof it. Outlook for the future: should the kernel eventually allow passing of cgroup information along AF_UNIX/SOCK_DGRAM messages via a unique cgroup id, then we can alter the invocation ID to be generated as hash from that rather than entirely randomly. This way we can derive the invocation race-freely from the messages.
2016-10-07bus-util: generalize helper for ID128 prpoertiesLennart Poettering
This way, we can make use of this in other code, too.
2016-10-05seccomp: add support for the s390 architecture (#4287)hbrueckner
Add seccomp support for the s390 architecture (31-bit and 64-bit) to systemd. This requires libseccomp >= 2.3.1.
2016-09-25core: add two new service settings ProtectKernelTunables= and ↵Lennart Poettering
ProtectControlGroups= If enabled, these will block write access to /sys, /proc/sys and /proc/sys/fs/cgroup.
2016-09-17Merge pull request #4123 from keszybz/network-file-dropinsMartin Pitt
Network file dropins
2016-09-16shared/conf-parser: add config_parse_many which takes strv with dirsZbigniew Jędrzejewski-Szmek
This way we don't have to create a nulstr just to unpack it in a moment.
2016-09-16tree-wide: rename config_parse_many to …_nulstrZbigniew Jędrzejewski-Szmek
In preparation for adding a version which takes a strv.
2016-09-15Merge pull request #4131 from intelfx/update-done-timestamps-precisionZbigniew Jędrzejewski-Szmek
condition: ignore nanoseconds in timestamps for ConditionNeedsUpdate= Fixes #4130.
2016-09-15update-done, condition: write the timestamp to the file as well and use it ↵Ivan Shapovalov
to prevent false-positives This fixes https://bugs.freedesktop.org/show_bug.cgi?id=90192 and #4130 for real. Also, remove timestamp check in update-done.c altogether since the whole operation is idempotent.
2016-09-13fileio: simplify mkostemp_safe() (#4090)Topi Miettinen
According to its manual page, flags given to mkostemp(3) shouldn't include O_RDWR, O_CREAT or O_EXCL flags as these are always included. Beyond those, the only flag that all callers (except a few tests where it probably doesn't matter) use is O_CLOEXEC, so set that unconditionally.
2016-09-10shared/install: fix set-default with empty root (#4118)Zbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1374371 When root was empty or equal to "/", chroot_symlinks_same was called with root==NULL, and strjoina returned "", so the code thought both paths are equal even if they were not. Fix that by always providing a non-null first argument to strjoina.
2016-09-09shared: recognize DNS names with more than one trailing dot as invalid (#4111)Martin Pitt
One trailing dot is valid, but more than one isn't. This also fixes glibc's posix/tst-getaddrinfo5 test. Fixes #3978.
2016-09-06seccomp: also detect if seccomp filtering is enabledFelipe Sateler
In https://github.com/systemd/systemd/pull/4004 , a runtime detection method for seccomp was added. However, it does not detect the case where CONFIG_SECCOMP=y but CONFIG_SECCOMP_FILTER=n. This is possible if the architecture does not support filtering yet. Add a check for that case too. While at it, change get_proc_field usage to use PR_GET_SECCOMP prctl, as that should save a few system calls and (unnecessary) allocations. Previously, reading of /proc/self/stat was done as recommended by prctl(2) as safer. However, given that we need to do the prctl call anyway, lets skip opening, reading and parsing the file. Code for checking inspired by https://outflux.net/teach-seccomp/autodetect.html
2016-08-31networkd: add options to bridge (#4051)Tobias Jungel
This patch allows to configure AgeingTimeSec, Priority and DefaultPVID for bridge interfaces.
2016-08-30install: fix disable when /etc/systemd/system is a symlinkLukas Nykryn
2016-08-26Merge pull request #3984 from poettering/refcntEvgeny Vereshchagin
permit bus clients to pin units to avoid automatic GC
2016-08-22core: do not fail at step SECCOMP if there is no kernel support (#4004)Felipe Sateler
Fixes #3882
2016-08-22bus-util: turn on exit-on-disconnect for all command line toolsLennart Poettering
bus_connect_transport() is exclusively used from our command line tools, hence let's set exit-on-disconnect for all of them, making behaviour a bit nicer in case dbus-daemon goes down.
2016-08-22run: optionally, wait for the service to finish and show its resultLennart Poettering