| Age | Commit message (Collapse) | Author |
|---|
|
|
|
On some architectures (like s390x) the kernel has the type int for
f_type, but long in userspace.
Assigning the 32 bit magic constants from linux/magic.h to the 31 bit
signed f_type in the kernel, causes f_type to be negative for some
constants.
glibc extends the int to long for those architecures in 64 bit mode, so
the negative int becomes a negative long, which cannot be simply
compared to the original magic constant, because the compiler would
automatically cast the constant to long.
To workaround this issue, we also compare to the (int)MAGIC value in a
macro. Of course, we could do #ifdef with the architecure, but it has to
be maintained, and the magic constants are 32 bit anyway.
Someday, when the int is unsigned or long for all architectures, we can
remove this macro again. Until then, keep it as simple as it can be.
|
|
bus_error and bus_error_message_or_strerror dit almost exactly the same,
so use only one of them and place it in dbus-common.
|
|
Instead of making a type up, just use __SWORD_TYPE, after reading
statfs(2).
Too bad, this does not fix s390x because __SWORD_TYPE is (long int) and
the kernel uses (int) to fill in the field!!!!!!
|
|
|
|
statfs.f_type is signed but the filesystem magics are unsigned.
Casting the magics to signed will not make the signed.
Problem seen on big-endian 64bit s390x with __fsword_t 8 bytes.
Casting statfs.f_type to unsigned on the other hand will get us what we
need.
https://bugzilla.redhat.com/show_bug.cgi?id=953217
|
|
Because "export key=val" is not supported by systemd, an error is logged
where the invalid assignment is coming from.
Introduce strv_env_clean_log() to log invalid environment assignments,
where logging is possible and allowed.
parse_env_file_internal() is modified to allow WHITESPACE in keys, to
report the issues later on.
|
|
parse_env_file_internal() could not parse the following lines correctly:
export key="val"
key="val"#comment
|
|
These are also considered special by sh and bash.
|
|
They are irrelevant and misleading.
E.g. systemd-analyze:
Startup finished in 6d 4h 15min 32.330s (kernel) + 49ms 914us (userspace) = 6d 4h 15min 32.380s
becomes
Startup finished in 53.735ms (userspace) = 53.735ms
which looks much better :)
|
|
|
|
The information about the unit for which files are being parsed
is passed all the way down. This way messages land in the journal
with proper UNIT=... or USER_UNIT=... attribution.
'systemctl status' and 'journalctl -u' not displaying those messages
has been a source of confusion for users, since the journal entry for
a misspelt setting was often logged quite a bit earlier than the
failure to start a unit.
Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
|
|
Those functions were identical, apart from typos. Log message
is modified to contain the type of destination var (int, double,
...). I think this might make it easier to understand why a value
was rejected (e.g. a minus from an unsigned type).
|
|
|
|
This also makes sure we always detect an OS tree the same way, by
checking for /etc/os-release.
|
|
There's now a generic _cleanup_ macro with an argument. The macros for
specific types are now defined using this macro, and in the header files
where they belong.
All cleanup handlers are now inline functions.
|
|
DECIMAL_STR_WIDTH() now works on any numeric type, and is easier to
distingish from DECIMAL_STR_MAX().
This also replaces another manual implementaiton of ulog10 by this macro.
|
|
containers there
Containers will now carry a label (normally derived from the root
directory name, but configurable by the user), and the container's root
cgroup is /machine/<label>. This label is called "machine name", and can
cover both containers and VMs (as soon as libvirt also makes use of
/machine/).
libsystemd-login can be used to query the machine name from a process.
This patch also includes numerous clean-ups for the cgroup code.
|
|
|
|
this anymore to skip audit session ID retrieval
As audit is still broken in containers we need a reliable way how we can
determine whether the audit data we read from 7proc is actually useful.
Previously we used CAP_AUDIT_CONTROL for this, since nspawn removed that
from the nspawn container. This has changed a while back however, which
means we used audit data of host system in the container.
This adds an explicit container check to the audit calls, so that all
audit data is turned off in containers.
This should fix session creation with pam_systemd/logind in nspawn containers.
|
|
This allows clients to put inotify watches on these trees to watch for
state changes, without having to wait until these dirs are created.
This introduces the new top-level /machine cgroup dir as canonical
location where OS containers and VMs shall be located (as discussed with
the libvirt folks).
|
|
If systemd-vconsole-setup was started with LANG=C (no locale.conf), then
it would set the console to non-unicode, which is not what we want.
|
|
|
|
Make sure that our library is safe for usage in SUID programs when it
comes to env var handling
|
|
"__attribute__((always_inline))" does not replace "inline" and they
still need to be used together. This fixes "always_inline function
might not be inlinable [-Wattributes]" warning in gcc 4.7
Idea-from-patch-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
|
|
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=63477
|
|
Just {} is used in a lot of places now, and there's nothing
special abose those few.
|
|
|
|
|
|
|
|
Make sure we compare errno against positive error codes.
The ones in hwclock.c and install.c can have an impact, the
rest are unlikely to be hit or in code that isn't widely
used.
Also check that errno > 0, to help gcc know that we are
returning a negative error code.
|
|
If we pass a constant value to ALIGN() gcc should have the chance to
calculate the value during compilation rather than runtime, so let's
avoid a static inline call if we can.
|
|
I was debugging systemd waiting on a missing disk, and noticed
that the job listing could use some polishing. Jobs that are
actually running are highlighted, so it's easier to see what
very actually waiting for.
Also, the needed widths are precalculated, to use available columns
more ecomically.
|
|
|
|
|
|
cgroup directories in sync
|
|
Avoid memory allocations to construct the path for files in the
procfs. The procfs paths are way shorter than the PATH_MAX so we
can use snprintf on a string located on the stack. This shows up
as a win on x86 using the benchmark program below.
$ make libsystemd-shared.la; gcc -O2 -Isrc/systemd/ -Isrc/ \
-o simple-perf-test simple-perf-test.c \
.libs/libsystemd-shared.a -lrt
#include "shared/util.h"
void test_once(void) {
pid_t pid = getpid();
char *tmp = NULL;
get_process_comm(pid, &tmp);
free(tmp);
tmp = NULL;
get_process_cmdline(pid, 0, 1, &tmp);
free(tmp);
is_kernel_thread(pid);
tmp = NULL;
get_process_exe(pid, &tmp);
free(tmp);
}
int main(int argc, char **argv)
{
int i;
for (i = 0; i < 50000; ++i)
test_once();
}
|
|
Fix for:
b92bea5d2a9481de69bb627a7b442a9f58fca43d
Causing:
systemd-logind[265]: Assertion 'd = event.data.ptr' failed at src/shared/dbus-loop.c:233, function bus_loop_dispatch(). Aborting.
|
|
|
|
Fixes a memleak in error path in exec_context_load_environment.
|
|
Before, we would initialize many fields twice: first
by filling the structure with zeros, and then a second
time with the real values. We can let the compiler do
the job for us, avoiding one copy.
A downside of this patch is that text gets slightly
bigger. This is because all zero() calls are effectively
inlined:
$ size build/.libs/systemd
text data bss dec hex filename
before 897737 107300 2560 1007597 f5fed build/.libs/systemd
after 897873 107300 2560 1007733 f6075 build/.libs/systemd
… actually less than 1‰.
A few asserts that the parameter is not null had to be removed. I
don't think this changes much, because first, it is quite unlikely
for the assert to fail, and second, an immediate SEGV is almost as
good as an assert.
|
|
It is possible to build systemd without logind or run logind without systemd
init. Commit 66e41181 fixed sd_booted() to only succeed for systemd init; with
that, testing for systemd init is wrong in the parts that talk to logind.
In particular, this affects the PAM module and the "uaccess" udev builtin.
Change sd_booted() to a new logind_running() which tests for
/run/systemd/seats/.
For details, see:
<https://mail.gnome.org/archives/desktop-devel-list/2013-March/msg00092.html>
https://bugs.freedesktop.org/show_bug.cgi?id=62754
|
|
|
|
|
|
Make sure to always print out at least one valid component instead of
falling back early to 0.
|
|
different umask
|
|
Instead of outputting "5h 55s 50ms 3us" we'll now output "5h
55.050003s". Also, while outputting the accuracy is configurable.
Basically we now try use "dot notation" for all time values > 1min. For
>= 1s we use 's' as unit, otherwise for >= 1ms we use 'ms' as unit, and
finally 'us'.
This should give reasonably values in most cases.
|
|
We can now parse "0.5s" as the same as "500ms". In fact, we can parse
"3.45years" correctly, too, and any other unit and fraction length.
|
