| Age | Commit message (Collapse) | Author |
|---|
|
parse_field() checks if the field has the expected format, and returns
0 if it doesn't. In that case, value and size are not
set. Nevertheless, we would try to continue, and hit an assert in
safe_atou64. This case shouldn't happen, unless sd_j_get_data is borked,
so cleanly assert that we got the expected field.
Also, oom is the only way that parse_field can fail, which we log
already. Instead of outputting a debug statement and carrying on,
treat oom as fatal.
|
|
The next step of a general cleanup of our includes. This one mostly
adds missing includes but there are a few removals as well.
|
|
This adds most basic operation for doing DNSSEC validation on the
client side. However, it does not actually add the verification logic to
the resolver. Specifically, this patch only includes:
- Verifying DNSKEY RRs against a DS RRs
- Verifying RRSets against a combination of RRSIG and DNSKEY RRs
- Matching up RRSIG RRs and DNSKEY RRs
- Matching up RR keys and RRSIG RRs
- Calculating the DNSSEC key tag from a DNSKEY RR
All currently used DNSSEC combinations of SHA and RSA are implemented. Support
for MD5 hashing and DSA or EC cyphers are not. MD5 and DSA are probably
obsolete, and shouldn't be added. EC should probably be added
eventually, if it actually is deployed on the Internet.
|
|
canonical names
We'll need this later when putting together RR serializations to
checksum.
|
|
Some calls used ENOBUFS to indicate too-short result buffers, others
used ENOSPC. Let's unify this on ENOBUFS.
|
|
Let's better be safe than sorry.
|
|
domain
The root domain consists of zero labels, and we should be able to encode
that.
|
|
Make sure dns_name_normalize(), dns_name_concat(), dns_name_is_valid()
do not accept/generate invalidly long hostnames, i.e. longer than 253
characters.
|
|
Labels of zero length are not OK, refuse them early on. The concept of a
"zero-length label" doesn't exist, a zero-length full domain name
however does (representing the root domain). See RFC 2181, Section 11.
|
|
Two unrelated fixes
|
|
journal: clean up permission setting and acl adjustements on user journals
|
|
|
|
When we have non-owner user or group entries, we need the mask
for the acl to be valid. But acl_calc_mask() calculates the mask
to include all permissions, even those that were masked before.
Apparently this happens when we inherit *:r-x permissions from
a parent directory — the kernel sets *:r-x, mask:r--, effectively
masking the executable bit. acl_calc_mask() would set the mask:r-x,
effectively enabling the bit. To avoid this, be more conservative when
to add the mask entry: first iterate over all entries, and do nothing
if a mask.
This returns the code closer to J.A.Steffens' original version
in v204-90-g23ad4dd884.
Should fix https://github.com/systemd/systemd/issues/1977.
|
|
Most of the function is moved to acl-util.c to make it possible to
add tests in subsequent commit.
Setting of the mode in server_fix_perms is removed:
- we either just created the file ourselves, and the permission be better right,
- or the file was already there, and we should not modify the permissions.
server_fix_perms is renamed to server_fix_acls to better reflect new
meaning, and made static because it is only used in one file.
|
|
Let's distuingish the cases where our code takes an active role in
selinux management, or just passively reports whatever selinux
properties are set.
mac_selinux_have() now checks whether selinux is around for the passive
stuff, and mac_selinux_use() for the active stuff. The latter checks the
former, plus also checks UID == 0, under the assumption that only when
we run priviliged selinux management really makes sense.
Fixes: #1941
|
|
The header file defines some helpers for GLIBC NSS and doesn't include
anything else but glibc headers, hence there's little reason to keep it
in shared/.
See: #2008
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
core: rename Random* to RandomizedDelay*
|
|
The name RandomSec is too generic: "Sec" just specifies the default
unit type, and "Random" by itself is not enough. Rename to something
that should give the user general idea what the setting does without
looking at documentation.
|
|
The new dns_label_escape() call now operates on a buffer passed in,
similar to dns_label_unescape(). This should make decoding a bit faster,
and nicer.
|
|
For similar reasons as dns_name_is_root() got changed in the previous
commit.
|
|
Let's change the return value to bool. If we encounter an error while
parsing, return "false" instead of the actual parsing error, after all
the specified hostname does not qualify for what the function is
supposed to test.
Dealing with the additional error codes was always cumbersome, and
easily misused, like for example in the DHCP code.
Let's also rename the functions from dns_name_root() to
dns_name_is_root(), to indicate that this function checks something and
returns a bool. Similar for dns_name_is_signal_label().
|
|
|
|
Most servers apparently always implicitly convert DNAME to CNAME, but
some servers don't, hence implement this properly, as this is required
by edns0.
|
|
This adds dns_service_join() and dns_service_split() which may be used
to concatenate a DNS-SD service name, am SRV service type string, and a
domain name into a full resolvable DNS domain name string. If the
service name is specified as NULL, only the type and domain are
appended, to implement classic, non-DNS-SD SRV lookups.
The reverse is dns_service_split() which takes the full name, and split
it into the three components again.
|
|
|
|
tree-wide: sort includes in *.h
|
|
libsystemd-network: add support for "Client FQDN" DHCP option (v2)
|
|
This is a continuation of the previous include sort patch, which
only sorted for .c files.
|
|
This allows configuration of a random time on top of the elapse events,
in order to spread time events in a network evenly across a range.
|
|
|
|
|
|
The function converts a domain name string to the wire format
described in RFC 1035 Section 3.1.
|
|
Sort the includes accoding to the new coding style.
|
|
from 0ec0deaa
|
|
Remove support for RequiresOverridable= and RequisiteOverridable=
|
|
The initrd version of systemd-fsck-root.service must wait for
local-fs-pre.target just like systemd-fsck@.service to prevent
modifications to the filesystem prior to resuming from hibernation.
As-is my laptop routinely fails to resume due to fsck errors. The rest
of the time it is probably silently corrupting the filesystem.
Unlike normal boot, in the initrd systemd-fsck-root.service has no
special significance so it needs to be kept in sync with
systemd-fsck@.service. The name systemd-fsck-root.service is only used
to preserve state across switch-root.
|
|
As discussed at systemd.conf 2015 and on also raised on the ML:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034880.html
This removes the two XyzOverridable= unit dependencies, that were
basically never used, and do not enhance user experience in any way.
Most folks looking for the functionality this provides probably opt for
the "ignore-dependencies" job mode, and that's probably a good idea.
Hence, let's simplify systemd's dependency engine and remove these two
dependency types (and their inverses).
The unit file parser and the dbus property parser will now redirect
the settings/properties to result in an equivalent non-overridable
dependency. In the case of the unit file parser we generate a warning,
to inform the user.
The dbus properties for this unit type stay available on the unit
objects, but they are now hidden from usual introspection and will
always return the empty list when queried.
This should provide enough compatibility for the few unit files that
actually ever made use of this.
|
|
Previously, the %u, %U, %s and %h specifiers would resolve to the user
name, numeric user ID, shell and home directory of the user configured
in the User= setting of a unit file, or the user of the manager instance
if no User= setting was configured. That at least was the theory. In
real-life this was not ever actually useful:
- For the systemd --user instance it made no sense to ever set User=,
since the instance runs in user context after all, and hence the
privileges to change user IDs don't even exist. The four specifiers
were actually not useful at all in this case.
- For the systemd --system instance we did not allow any resolving that
would require NSS. Hence, %s and %h were not supported, unless
User=root was set, in which case they would be hardcoded to /bin/sh
and /root, to avoid NSS. Then, %u would actually resolve to whatever
was set with User=, but %U would only resolve to the numeric UID of
that setting if the User= was specified in numeric form, or happened
to be root (in which case 0 was hardcoded as mapping). Two of the
specifiers are entirely useless in this case, one is realistically
also useless, and one is pretty pointless.
- Resolving of these settings would only happen if User= was actually
set *before* the specifiers where resolved. This behaviour was
undocumented and is really ugly, as specifiers should actually be
considered something that applies to the whole file equally,
independently of order...
With this change, %u, %U, %s and %h are drastically simplified: they now
always refer to the user that is running the service instance, and the
user configured in the unit file is irrelevant. For the system instance
of systemd this means they always resolve to "root", "0", "/bin/sh" and
"/root", thus avoiding NSS. For the user instance, to the data for the
specific user.
The new behaviour is identical to the old behaviour in all --user cases
and for all units that have no User= set (or set to "0" or "root").
|
|
[Install] data
Some distributions use alias unit files via symlinks in /usr to cover
for legacy service names. With this change we'll allow "systemctl
enable" on such aliases.
Previously, our rule was that symlinks are user configuration that
"systemctl enable" + "systemctl disable" creates and removes, while unit
files is where the instructions to do so are store. As a result of the
rule we'd never read install information through symlinks, since that
would mix enablement state with installation instructions.
Now, the new rule is that only symlinks inside of /etc are
configuration. Unit files, and symlinks in /usr are now valid for
installation instructions.
This patch is quite a rework of the whole install logic, and makes the
following addional changes:
- Adds a complete test "test-instal-root" that tests the install logic
pretty comprehensively.
- Never uses canonicalize_file_name(), because that's incompatible with
operation relative to a specific root directory.
- unit_file_get_state() is reworked to return a proper error, and
returns the state in a call-by-ref parameter. This cleans up confusion
between the enum type and errno-like errors.
- The new logic puts a limit on how long to follow unit file symlinks:
it will do so only for 64 steps at max.
- The InstallContext object's fields are renamed to will_process and
has_processed (will_install and has_installed) since they are also
used for deinstallation and all kinds of other operations.
- The root directory is always verified before use.
- install.c is reordered to place the exported functions together.
- Stricter rules are followed when traversing symlinks: the unit suffix
must say identical, and it's not allowed to link between regular units
and templated units.
- Various modernizations
- The "invalid" unit file state has been renamed to "bad", in order to
avoid confusion between UNIT_FILE_INVALID and
_UNIT_FILE_STATE_INVALID. Given that the state should normally not be
seen and is not documented this should not be a problematic change.
The new name is now documented however.
Fixes #1375, #1718, #1706
|
|
Instead, let the caller do that. Fix this by moving masked unit messages
into the caller, by returning a clear error code (ESHUTDOWN) by which
this may be detected.
|
|
|
|
This directive allows passing environment variables from the system
manager to spawned services. Variables in the system manager can be set
inside a container by passing `--set-env=...` options to systemd-spawn.
Tested with an on-disk test.service unit. Tested using multiple variable
names on a single line, with an empty setting to clear the current list
of variables, with non-existing variables.
Tested using `systemd-run -p PassEnvironment=VARNAME` to confirm it
works with transient units.
Confirmed that `systemctl show` will display the PassEnvironment
settings.
Checked that man pages are generated correctly.
No regressions in `make check`.
|
|
The macro is generically useful for putting together search paths, hence
let's make it truly generic, by dropping the implicit ".d" appending it
does, and leave that to the caller. Also rename it from
CONF_DIRS_NULSTR() to CONF_PATHS_NULSTR(), since it's not strictly about
dirs that way, but any kind of file system path.
Also, mark CONF_DIR_SPLIT_USR() as internal macro by renaming it to
_CONF_PATHS_SPLIT_USR() so that the leading underscore indicates that
it's internal.
|
|
|
|
[v2] treewide: treatment of errno and other cleanups
|
|
with small manual cleanups for style.
|
|
|
|
Our functions return negative error codes.
Do not rely on errno being set after calling our own functions.
|
|
After all, this is not some compiler or C magic, but something very
specific to how systemd works, hence let's move it into def.h, and out
of macro.h
|
