summaryrefslogtreecommitdiff
path: root/src/shared
AgeCommit message (Collapse)Author
2013-07-11basic SO_REUSEPORT supportShawn Landden
2013-07-10cgroup: when uninstalling agent, actually turn it off firstLennart Poettering
2013-07-10systemctl: suppress error message when doing "systemctl daemon-reexec"Lennart Poettering
When we issue a reexecution request via the private socket we need to expect a "Disconnected" in addition to "NoReply" when the connection is terminated.
2013-07-10core: serialize/deserialize bus subscribersLennart Poettering
2013-07-05tests: add tests for string lookup tablesZbigniew Jędrzejewski-Szmek
The tests check if the tables have entries for all values in the enum, and that the entries are unique.
2013-07-04disable the cgroups release agent when shutting downKay Sievers
During shutdown, when we try to clean up all remaining processes, the kernel will fork new agents every time a cgroup runs empty. These new processes cause delays in the final SIGTERM, SIGKILL logic. Apart from that, this should also avoid that the kernel-forked binaries cause unpredictably timed access to the filesystem which we might need to unmount.
2013-07-02replace tabs with spaces in various filesJason St. John
The affected files in this patch had inconsistent use of tabs vs. spaces for indentation, and this patch eliminates the stray tabs. Also, the opening brace of sigchld_hdl() in activate.c was moved so the opening braces are consistent throughout the file.
2013-07-02journald: drop (deleted) from _EXE= fieldsZbigniew Jędrzejewski-Szmek
The kernel adds those when the file is deleted, but we don't really care if the file is still there or not. The downside is that if the filename ends in ' (deleted)', this part of the filename will be removed. Too bad.
2013-07-02man: improve grammar and word formatting in numerous man pagesJason St. John
Use proper grammar, word usage, adjective hyphenation, commas, capitalization, spelling, etc. To improve readability, some run-on sentences or sentence fragments were revised. [zj: remove the space from 'file name', 'host name', and 'time zone'.]
2013-07-02libsystemd-logind: fix detection of session/user/machine of a PIDLennart Poettering
2013-07-02logind: port over to use scopes+slices for all cgroup stuffLennart Poettering
In order to prepare things for the single-writer cgroup scheme, let's make logind use systemd's own primitives for cgroup management. Every login user now gets his own private slice unit, in which his sessions live in a scope unit each. Also, add user@$UID.service to the same slice, and implicitly start it on first login.
2013-07-02core: split out unit bus path unescaping into unit_name_from_dbus_path()Lennart Poettering
2013-07-01core: add new "scope" unit type for making a unit of pre-existing processesLennart Poettering
"Scope" units are very much like service units, however with the difference that they are created from pre-existing processes, rather than processes that systemd itself forks off. This means they are generated programmatically via the bus API as transient units rather than from static configuration read from disk. Also, they do not provide execution-time parameters, as at the time systemd adds the processes to the scope unit they already exist and the parameters cannot be applied anymore. The primary benefit of this new unit type is to create arbitrary cgroups for worker-processes forked off an existing service. This commit also adds a a new mode to "systemd-run" to run the specified processes in a scope rather then a transient service.
2013-06-28core: add transient unitsLennart Poettering
Transient units can be created via the bus API. They are configured via the method call parameters rather than on-disk files. They are subject to normal GC. Transient units currently may only be created for services (however, we will extend this), and currently only ExecStart= and the cgroup parameters can be configured (also to be extended). Transient units require a unique name, that previously had no configuration file on disk. A tool systemd-run is added that makes use of this functionality to run arbitrary command lines as transient services: $ systemd-run /bin/ping www.heise.de Will cause systemd to create a new transient service and run ping in it.
2013-06-27test: Add list testcaseJan Janssen
2013-06-27core: general cgroup reworkLennart Poettering
Replace the very generic cgroup hookup with a much simpler one. With this change only the high-level cgroup settings remain, the ability to set arbitrary cgroup attributes is removed, so is support for adding units to arbitrary cgroup controllers or setting arbitrary paths for them (especially paths that are different for the various controllers). This also introduces a new -.slice root slice, that is the parent of system.slice and friends. This enables easy admin configuration of root-level cgrouo properties. This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in /dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is turned off by DevicePolicy=).
2013-06-26journalctl: highlight MESSAGE= in verbose outputZbigniew Jędrzejewski-Szmek
When looking at verbose output, additional "work" is required to pick out the interesting MESSAGE= lines from all the fields. Also, show long fields in full in verbose output mode when OUTPUT_FULL_WIDTH is specified.
2013-06-20journalctl,systemctl: show messages tagged with OBJECT_SYSTEMD_[USER_]_UNITZbigniew Jędrzejewski-Szmek
Replace mallocs with alloca while at it.
2013-06-20Make sure we only show authentic coredump messagesZbigniew Jędrzejewski-Szmek
Before we only checked the MESSAGE_ID and COREDUMP_UNIT. Those are both user-controlled fields. For COREDUMP_USER_UNIT, relax the rules a bit, and also allow messages from _UID=0.
2013-06-20Add hasprefix macro to check prefixes of fixed lengthZbigniew Jędrzejewski-Szmek
2013-06-21login: add an api to determine the slice a PID is located in to libsystemd-loginLennart Poettering
2013-06-20journalctl: show lines in full with --allZbigniew Jędrzejewski-Szmek
In 31f7bf1 "logs-show: print multiline messages", I forgot to take into account the fact that --all implies --full for journalctl.
2013-06-20logind: add infrastructure to keep track of machines, and move to slicesLennart Poettering
- This changes all logind cgroup objects to use slice objects rather than fixed croup locations. - logind can now collect minimal information about running VMs/containers. As fixed cgroup locations can no longer be used we need an entity that keeps track of machine cgroups in whatever slice they might be located. Since logind already keeps track of users, sessions and seats this is a trivial addition. - nspawn will now register with logind and pass various bits of metadata along. A new option "--slice=" has been added to place the container in a specific slice. - loginctl gained commands to list, introspect and terminate machines. - user.slice and machine.slice will now be pulled in by logind.service, since only logind.service requires this slice.
2013-06-17core: add new .slice unit type for partitioning systemsLennart Poettering
In order to prepare for the kernel cgroup rework, let's introduce a new unit type to systemd, the "slice". Slices can be arranged in a tree and are useful to partition resources freely and hierarchally by the user. Each service unit can now be assigned to one of these slices, and later on login users and machines may too. Slices translate pretty directly to the cgroup hierarchy, and the various objects can be assigned to any of the slices in the tree.
2013-06-10journalctl: allow the user to specify the file(s) to useZbigniew Jędrzejewski-Szmek
This is useful for debugging and feels pretty natural. For example answering the question "is this big .journal file worth keeping?" is made easier.
2013-06-10Properly check for overflow in offsetsZbigniew Jędrzejewski-Szmek
2013-06-10journal: loop less in MATCH_AND_TERM conditionalsZbigniew Jędrzejewski-Szmek
AND term usually don't have many subterms (4 seems to be the maximum sensible number, e.g. _BOOT_ID && _SYSTEMD_UNIT && _PID && MESSAGE_ID). Nevertheless, the cost of checking each subterm can be relatively high, especially when the nested terms are compound, and it makes sense to minimize the number of checks. Instead of looping to the end and then again over the whole list once again after at least one term changed the offset, start the loop at the term which caused the change. This way ½ terms in the AND match are not checked unnecessarily again.
2013-06-10journal: add ability to filter by current userZbigniew Jędrzejewski-Szmek
This is the just the library part. SD_JOURNAL_CURRENT_USER flags is added to sd_j_open(), to open files from current user. SD_JOURNAL_SYSTEM_ONLY is renamed to SD_JOURNAL_SYSTEM, and changed to mean to (also) open system files. This way various flags can be combined, which gives them nicer semantics, especially if other ones are added later. Backwards compatibility is kept, because SD_JOURNAL_SYSTEM_ONLY is equivalent to SD_JOURNAL_SYSTEM if used alone, and before there we no other flags.
2013-06-10dev-setup: do not create a dangling /proc/kcore symlinkZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=65382 https://bugs.gentoo.org/472060?id=472060
2013-06-09journalctl: fix verbose output when no logs are foundZbigniew Jędrzejewski-Szmek
$ journalctl -o verbose _EXE=/quiet/binary -f -- Logs begin at Sun 2013-03-17 17:28:22 EDT. -- Failed to get realtime timestamp: Cannot assign requested address JOURNAL_FOREACH_DATA_RETVAL is added, which allows the caller to get the return value from sd_journal_enumerate_data. I think we might want to expose this macro like SD_JOURNAL_FOREACH_DATA, but for now it is in journal-internal.h. There's a change in behaviour for output_*, not only in output_verbose, that errors in sd_j_enumerate_data are not silently ignored anymore. https://bugs.freedesktop.org/show_bug.cgi?id=56459
2013-06-09Allow for the use of @ in remote host callsDaniel Wallace
Without this you have to use %40 with the -H flag because dbus doesn't like the @ sign being unescaped.
2013-06-09logs-show: print multiline messagesZbigniew Jędrzejewski-Szmek
[ 0.019862] fedora kernel: CPU0: Thermal monitoring enabled (TM1) [ 0.019900] fedora kernel: Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 [ 0.020118] fedora kernel: Freeing SMP alternatives: 24k freed
2013-06-06cgroup: the "tasks" attribute is obsolete, cgroup.procs is the new replacementLennart Poettering
2013-06-06manager: Do not handle SIGKILL since we can notChengwei Yang
This is a minor fix because it's not a major issue, this fix just avoid to get EINVAL error from sigaction(2). There are two signals can not handled at user space, SIGKILL and SIGSTOP even we're PID 1, trying to handle these two signals will get EINVAL error. There are two kinds of systemd instance, running as system manager or user session manager, apparently, the latter is a general user space process which can not handle SIGKILL. The special pid 1 also can not do that refer to kernel/signal.c:do_sigaction(). However, pid 1 is unkillable because the kernel did attach SIGNAL_UNKILLABLE to it at system boot up, refer to init/main.c:start_kernel() --> rest_init() --> kernel_thread() --> kernel_init() --> init_post() current->signal->flags |= SIGNAL_UNKILLABLE
2013-06-04systemctl: limit logs in status to current bootZbigniew Jędrzejewski-Szmek
Also reworded a few debug messages for brevity, and added a log statement which prints out the filter at debug level: Journal filter: (((UNIT=sys-module-configfs.device AND _PID=1) OR (COREDUMP_UNIT=sys-module-configfs.device AND MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1) OR _SYSTEMD_UNIT=sys-module-configfs.device) AND _BOOT_ID=4e3c518ab0474c12ac8de7896fe6b154)
2013-06-03systemctl,core: allow nuking of symlinks to removed unitsZbigniew Jędrzejewski-Szmek
Before, one the unit file was deleted, install_context_for_removal() would refuse to look for symlinks. But we can remove dangling symlinks anyway. In principle, package installation/deinstallation scripts should do that before the unit is uninstalled, but they don't always do. Also, a user might have added additional symlinks manually. https://bugs.freedesktop.org/show_bug.cgi?id=62395
2013-05-30systemctl: suggest 'systemctl daemon-reload' without --systemZbigniew Jędrzejewski-Szmek
--system is default anyway, and some poor user might type 9 characters without needing to.
2013-05-30systemctl: add commands set-default and get-defaultVáclav Pavlín
systemctl set-default NAME links the default.target to the given unit, get-default prints out the path to the currently set default target.
2013-05-30journald: DO recalculate the ACL mask, but only if it doesn't existJan Alexander Steffens (heftig)
Since 11ec7ce, journald isn't setting the ACLs properly anymore if the files had no ACLs to begin with: acl_set_fd fails with EINVAL. An ACL with ACL_USER or ACL_GROUP entries but no ACL_MASK entry is invalid, so make sure a mask exists before trying to set the ACL.
2013-05-21systemctl: make systemctl is-enabled work for templated unitsMichael Tremer
Patch resolves the problem that 'systemctl is-enabled' does not work for templated units. Without this patch, systemctl is-enabled something@abc.service returned "No such file or directory", because it first checked if /usr/lib/systemd/system/something@abc.service, etc. exists. If systemctl is-enabled is called for templated units, this check should be omitted and it should search for symlinks in the .wants dirs right away. This patch fixes the broken behaviour and resolves https://bugs.freedesktop.org/show_bug.cgi?id=55318. [zj: fixed the patch to still check for broken symlinks and masked instances. Also removed untrue assumptions from the patch description.]
2013-05-17bus: add APIs for negotiating what is attached to messagesLennart Poettering
2013-05-16bus: make bus ref counting atomicLennart Poettering
This is preparation to allow sd_bus_message obejcts to be processed in a different thread from their originating sd_bus object.
2013-05-15Fix syscall(__NR_fanotify_mark, ...) on armChengwei Yang
2013-05-14bus: add and use UINT64_TO_PTR()Kay Sievers
2013-05-07hostname: only suppress setting of pretty hostname if it is non-equal to the ↵Lennart Poettering
static hostname and if the static hostname is set, too https://bugzilla.redhat.com/show_bug.cgi?id=957814
2013-05-07hashmap: document trivial_hash_func()Lennart Poettering
2013-05-07systemd-sleep: it is not an error if the config file is missingZbigniew Jędrzejewski-Szmek
2013-05-06systemd-sleep: add support for freeze and standbyZbigniew Jędrzejewski-Szmek
A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-06fileio: split write_one_line_file into twoZbigniew Jędrzejewski-Szmek
The new function allows one to write to an already open file.
2013-05-03cgroup: when escaping a cgroup object name, also escape names that start ↵Lennart Poettering
with a dot