| Age | Commit message (Collapse) | Author |
|---|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=73727
|
|
We used to check if e.g. IFLA_BOND_MAX is defined and provide fallback
values in missing.h is it wasn't. But over time, various kernel
versions added IFLA_* defines, so checking for IFLA_BOND_MAX is not
enough if the kernel is new enough to have some of them but too old to
have all. In case we detect that the latest known enum value is
missing, #define most of them.
https://bugs.freedesktop.org/show_bug.cgi?id=80095
|
|
|
|
Update for the current behavior of path_strv_resolve which now returns
paths relative to the given root, not the full absolute paths.
|
|
This restores the original root handling logic that was present prior to
112cfb18 when path expansion moved to path_strv_canonicalize_absolute.
That behavior partially went away in 12ed81d9.
Alternatively all users of conf_files_list* could be updated to
concatenate the paths themselves as unit_file_query_preset did but since
no user needs the un-concatenated form that is pointless duplication.
|
|
Since 12ed81d9 path_strv_canonicalize_absolute leaves the search list
relative to the given root directory instead of resolving paths to their
true location as the name implies. To better reflect this behavior
rename to the less strongly worded path_strv_resolve.
|
|
|
|
The idea was to not fail on, nor to ignore errors from chown()/chmod(),
but to proceed and simply return the most recent error...
|
|
Previously it would recursively copy the entire tree in, and descend
into subdirectories even if the destination already exists. Let's do
what the documentation says and not do that.
If files down the tree shall be copied too, they should get their own
"C" lines.
|
|
|
|
|
|
Introduce a new configuration file /etc/systemd/coredump.conf to
configure when to place coredumps in the journal and when on disk.
Since the coredumps are quite large, default to storing them only on
disk.
|
|
|
|
of it everywhere
|
|
|
|
|
|
|
|
This is based on parts of similar patches from Michael Marineau and
Lukas Nykrin, but simply uses strappenda3().
|
|
|
|
DefaultInstance= setting
|
|
cmdline
"debug" should apply to all tools, but "quiet" only to PID1.
|
|
outside of search path
|
|
instances
|
|
The DefaultInstance= name is used when enabling template units when only
specifying the template name, but no instance.
Add DefaultInstance=tty1 to getty@.service, so that when the template
itself is enabled an instance for tty1 is created.
This is useful so that we "systemctl preset-all" can work properly,
because we can operate on getty@.service after finding it, and the right
instance is created.
|
|
only after traversing all search directories
Let's always make sure to look in all search directories for the full
unit names first, before looking for templates for them.
|
|
creating a symlink
|
|
|
|
|
|
do all-unit preset operations
The new "systemctl preset-all" command may now be used to put all
installed units back into the enable/disable state the vendor/admin
encoded in preset files.
Also, introduce "systemctl --preset-mode=enable-only" and "systemctl
--preset-mode=disable-only" to only apply the enable or only the disable
operations of a "systemctl preset" or "systemctl preset-all" operation.
"systemctl preset-all" implements this RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=630174
|
|
|
|
|
|
|
|
We need to check for the last dot, not the first one in a unit name, for
the suffix. Correct that.
|
|
This is similar to malloc_multiply() and friends. It is realloc() with a
multiplication-overflow check.
|
|
Passing 0 to malloc() is not required to return NULL. Therefore, don't
bail out if "b" is 0. This is not of importance to the existing helpers,
but the upcoming realloc_multiply() requires this. To keep consistence, we
keep the same behavior for the other helpers.
|
|
As it turns out, we cannot use _Pragma in compound-statements. Therefore,
constructs like MIN(MAX(a, b), x) will warn due to shadowed variable
declarations. The DISABLE_WARNING_SHADOW macro can be used to suppress
these.
Note that using UNIQUE(_var) does not work either as GCC uses the last
line of a macro-expansion for __LINE__, therefore, still causing both
macros to have the same variables. We could use different variable-names
for MIN and MAX, but that just hides the problem and still fails for
MIN(something(MIN(a, b)), c).
The only working solution is to use __COUNTER__ and pass it pre-evaluated
as extra argument to a macro to use as name-prefix. This, however, makes
all these macros much more complicated so I'll go with manual
DISABLE_WARNING_SHADOW so far.
|
|
destination before creating a symlink
Also, make use of this for mtab as long as mount insists on creating it
even if we invoke it with "-n".
|
|
|
|
The file should have been in /usr/lib/ in the first place, since it
describes the OS container in /usr (and not the configuration in /etc),
hence, let's support os-release files in /usr/lib as fallback if no
version in /etc exists, following the usual override logic.
A prior commit already enabled tmpfiles to create /etc/os-release as a
symlink to /usr/lib/os-release should it be missing, thus providing nice
compatibility with applications only checking in /etc.
While it's probably a good idea if all apps check both locations via a
fallback logic, it is only necessary in the early boot process, as long
as the /etc/os-release symlink has not been restored, in case we boot
with an empty /etc.
|
|
int unit_file_mask(...) in ./src/shared/install.c calls
get_config_path(...) which can in 4 error cases return without setting
"ret", and thus "prefix" can be uninitialized when unit_file_mask(...)
finishes (which it does directly after the error is returned from
get_config_path(...)).
|
|
This new condition allows checking whether /etc or /var are out-of-date
relative to /usr. This is the counterpart for the update flag managed by
systemd-update-done.service. Services that want to be started once after
/usr got updated should use:
[Unit]
ConditionNeedsUpdate=/etc
Before=systemd-update-done.service
This makes sure that they are only run if /etc is out-of-date relative
to /usr. And that it will be executed after systemd-update-done.service
which is responsible for marking /etc up-to-date relative to the current
/usr.
ConditionNeedsUpdate= will also checks whether /etc is actually
writable, and not trigger if it isn't, since no update is possible then.
|
|
|
|
static files
systemd-sysusers is a tool to reconstruct /etc/passwd and /etc/group
from static definition files that take a lot of inspiration from
tmpfiles snippets. These snippets should carry information about system
users only. To make sure it is not misused for normal users these
snippets only allow configuring UID and gecos field for each user, but
do not allow configuration of the home directory or shell, which is
necessary for real login users.
The purpose of this tool is to enable state-less systems that can
populate /etc with the minimal files necessary, solely from static data
in /usr. systemd-sysuser is additive only, and will never override
existing users.
This tool will create these files directly, and not via some user
database abtsraction layer. This is appropriate as this tool is supposed
to run really early at boot, and is only useful for creating system
users, and system users cannot be stored in remote databases anyway.
The tool is also useful to be invoked from RPM scriptlets, instead of
useradd. This allows moving from imperative user descriptions in RPM to
declarative descriptions.
The UID/GID for a user/group to be created can either be chosen dynamic,
or fixed, or be read from the owner of a file in the file system, in
order to support reconstructing the correct IDs for files that shall be
owned by them.
This also adds a minimal user definition file, that should be
sufficient for most basic systems. Distributions are expected to patch
these files and augment the contents, for example with fixed UIDs for
the users where that's necessary.
|
|
"m" so far has been a non-globbing version of "z". Since this makes it
quite redundant, let's get rid of it. Remove "m" from the man pages,
beef up "z" docs instead, and make "m" nothing more than a compatibility
alias for "z".
|
|
|
|
|
|
It was forgotten in b1e90ec515408aec2702522f6f68c4920b56375b
See https://bugs.freedesktop.org/show_bug.cgi?id=79582
|
|
The current vm detection lacks the distinction between Xen dom0 and Xen domU.
Both, dom0 and domU are running inside the hypervisor.
Therefore systemd-detect-virt and the ConditionVirtualization directive detect
dom0 as a virtual machine.
dom0 is not using virtual devices but is accessing the real hardware.
Therefore dom0 should be considered the virtualisation host and not a virtual
machine.
https://bugs.freedesktop.org/show_bug.cgi?id=77271
|
|
|
