| Age | Commit message (Collapse) | Author |
|---|
|
cmdline
"debug" should apply to all tools, but "quiet" only to PID1.
|
|
outside of search path
|
|
instances
|
|
The DefaultInstance= name is used when enabling template units when only
specifying the template name, but no instance.
Add DefaultInstance=tty1 to getty@.service, so that when the template
itself is enabled an instance for tty1 is created.
This is useful so that we "systemctl preset-all" can work properly,
because we can operate on getty@.service after finding it, and the right
instance is created.
|
|
only after traversing all search directories
Let's always make sure to look in all search directories for the full
unit names first, before looking for templates for them.
|
|
creating a symlink
|
|
|
|
|
|
do all-unit preset operations
The new "systemctl preset-all" command may now be used to put all
installed units back into the enable/disable state the vendor/admin
encoded in preset files.
Also, introduce "systemctl --preset-mode=enable-only" and "systemctl
--preset-mode=disable-only" to only apply the enable or only the disable
operations of a "systemctl preset" or "systemctl preset-all" operation.
"systemctl preset-all" implements this RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=630174
|
|
|
|
|
|
|
|
We need to check for the last dot, not the first one in a unit name, for
the suffix. Correct that.
|
|
This is similar to malloc_multiply() and friends. It is realloc() with a
multiplication-overflow check.
|
|
Passing 0 to malloc() is not required to return NULL. Therefore, don't
bail out if "b" is 0. This is not of importance to the existing helpers,
but the upcoming realloc_multiply() requires this. To keep consistence, we
keep the same behavior for the other helpers.
|
|
As it turns out, we cannot use _Pragma in compound-statements. Therefore,
constructs like MIN(MAX(a, b), x) will warn due to shadowed variable
declarations. The DISABLE_WARNING_SHADOW macro can be used to suppress
these.
Note that using UNIQUE(_var) does not work either as GCC uses the last
line of a macro-expansion for __LINE__, therefore, still causing both
macros to have the same variables. We could use different variable-names
for MIN and MAX, but that just hides the problem and still fails for
MIN(something(MIN(a, b)), c).
The only working solution is to use __COUNTER__ and pass it pre-evaluated
as extra argument to a macro to use as name-prefix. This, however, makes
all these macros much more complicated so I'll go with manual
DISABLE_WARNING_SHADOW so far.
|
|
destination before creating a symlink
Also, make use of this for mtab as long as mount insists on creating it
even if we invoke it with "-n".
|
|
|
|
The file should have been in /usr/lib/ in the first place, since it
describes the OS container in /usr (and not the configuration in /etc),
hence, let's support os-release files in /usr/lib as fallback if no
version in /etc exists, following the usual override logic.
A prior commit already enabled tmpfiles to create /etc/os-release as a
symlink to /usr/lib/os-release should it be missing, thus providing nice
compatibility with applications only checking in /etc.
While it's probably a good idea if all apps check both locations via a
fallback logic, it is only necessary in the early boot process, as long
as the /etc/os-release symlink has not been restored, in case we boot
with an empty /etc.
|
|
int unit_file_mask(...) in ./src/shared/install.c calls
get_config_path(...) which can in 4 error cases return without setting
"ret", and thus "prefix" can be uninitialized when unit_file_mask(...)
finishes (which it does directly after the error is returned from
get_config_path(...)).
|
|
This new condition allows checking whether /etc or /var are out-of-date
relative to /usr. This is the counterpart for the update flag managed by
systemd-update-done.service. Services that want to be started once after
/usr got updated should use:
[Unit]
ConditionNeedsUpdate=/etc
Before=systemd-update-done.service
This makes sure that they are only run if /etc is out-of-date relative
to /usr. And that it will be executed after systemd-update-done.service
which is responsible for marking /etc up-to-date relative to the current
/usr.
ConditionNeedsUpdate= will also checks whether /etc is actually
writable, and not trigger if it isn't, since no update is possible then.
|
|
|
|
static files
systemd-sysusers is a tool to reconstruct /etc/passwd and /etc/group
from static definition files that take a lot of inspiration from
tmpfiles snippets. These snippets should carry information about system
users only. To make sure it is not misused for normal users these
snippets only allow configuring UID and gecos field for each user, but
do not allow configuration of the home directory or shell, which is
necessary for real login users.
The purpose of this tool is to enable state-less systems that can
populate /etc with the minimal files necessary, solely from static data
in /usr. systemd-sysuser is additive only, and will never override
existing users.
This tool will create these files directly, and not via some user
database abtsraction layer. This is appropriate as this tool is supposed
to run really early at boot, and is only useful for creating system
users, and system users cannot be stored in remote databases anyway.
The tool is also useful to be invoked from RPM scriptlets, instead of
useradd. This allows moving from imperative user descriptions in RPM to
declarative descriptions.
The UID/GID for a user/group to be created can either be chosen dynamic,
or fixed, or be read from the owner of a file in the file system, in
order to support reconstructing the correct IDs for files that shall be
owned by them.
This also adds a minimal user definition file, that should be
sufficient for most basic systems. Distributions are expected to patch
these files and augment the contents, for example with fixed UIDs for
the users where that's necessary.
|
|
"m" so far has been a non-globbing version of "z". Since this makes it
quite redundant, let's get rid of it. Remove "m" from the man pages,
beef up "z" docs instead, and make "m" nothing more than a compatibility
alias for "z".
|
|
|
|
|
|
It was forgotten in b1e90ec515408aec2702522f6f68c4920b56375b
See https://bugs.freedesktop.org/show_bug.cgi?id=79582
|
|
The current vm detection lacks the distinction between Xen dom0 and Xen domU.
Both, dom0 and domU are running inside the hypervisor.
Therefore systemd-detect-virt and the ConditionVirtualization directive detect
dom0 as a virtual machine.
dom0 is not using virtual devices but is accessing the real hardware.
Therefore dom0 should be considered the virtualisation host and not a virtual
machine.
https://bugs.freedesktop.org/show_bug.cgi?id=77271
|
|
|
|
Enforcement is still missing, but at least we can parse it now.
|
|
Instead of blindly creating another bind mount for read-only mounts,
check if there's already one we can use, and if so, use it. Also,
recursively mark all submounts read-only too. Also, ignore autofs mounts
when remounting read-only unless they are already triggered.
|
|
everything below
This has the benefit of not triggering any autofs mount points
unnecessarily.
|
|
|
|
sd_pid_notify() operates like sd_notify(), however operates on a
different PID (for example the parent PID of a process).
Make use of this in systemd-notify, so that message are sent from the
PID specified with --pid= rather than the usually shortlived PID of
systemd-notify itself.
This should increase the likelyhood that PID 1 can identify the cgroup
that the notification message was sent from properly.
|
|
It's not safe invoking NSS from PID 1, hence fork off worker processes
that upload the policy into the kernel for busnames.
|
|
system
This is relatively complex, as we cannot invoke NSS from PID 1, and thus
need to fork a helper process temporarily.
|
|
|
|
Either become uid/gid of the client we have been forked for, or become
the "systemd-bus-proxy" user if the client was root. We retain
CAP_IPC_OWNER so that we can tell kdbus we are actually our own client.
|
|
|
|
|
|
make use of it from other daemons too
This is preparation to make networkd work as unpriviliged user.
|
|
ignore_file currently allows any file ending with '~' while it
seems that the opposite was intended:
a228a22fda4faa9ecb7c5a5e499980c8ae5d2a08
|
|
Instead of accessing /proc/1/environ directly, trying to read the
$container variable from it, let's make PID 1 save the contents of that
variable to /run/systemd/container. This allows us to detect containers
without the need for CAP_SYS_PTRACE, which allows us to drop it from a
number of daemons and from the file capabilities of systemd-detect-virt.
Also, don't consider chroot a container technology anymore. After all,
we don't consider file system namespaces container technology anymore,
and hence chroot() should be considered a container even less.
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=49316
|
|
nspawn and the container child use eventfd to wait and notify each other
that they are ready so the container setup can be completed.
However in its current form the wait/notify event ignore errors that
may especially affect the child (container).
On errors the child will jump to the "child_fail" label and terminate
with _exit(EXIT_FAILURE) without notifying the parent. Since the eventfd
is created without the "EFD_NONBLOCK" flag, this leaves the parent
blocking on the eventfd_read() call. The container can also be killed
at any moment before execv() and the parent will not receive
notifications.
We can fix this by using cheap mechanisms, the new high level eventfd
API and handle SIGCHLD signals:
* Keep the cheap eventfd and EFD_NONBLOCK flag.
* Introduce eventfd states for parent and child to sync.
Child notifies parent with EVENTFD_CHILD_SUCCEEDED on success or
EVENTFD_CHILD_FAILED on failure and before _exit(). This prevents the
parent from waiting on an event that will never come.
* If the child is killed before execv() or before notifying the parent,
we install a NOP handler for SIGCHLD which will interrupt blocking calls
with EINTR. This gives a chance to the parent to call wait() and
terminate in main().
* If there are no errors, parent will block SIGCHLD, restore default
handler and notify child which will do execv(), then parent will pass
control to process_pty() to do its magic.
This was exposed in part by:
https://bugs.freedesktop.org/show_bug.cgi?id=76193
Reported-by: Tobias Hunger tobias.hunger@gmail.com
|
|
There was this code:
if (to_path_len > 0)
memcpy(p, to_path, to_path_len);
That didn't add the terminating zero, so the resulting string was
corrupt if this code path was taken.
Using strcpy() instead of memcpy() solves this issue, and also
simplifies the code.
Previously there was special handling for shortening "../../" to
"../..", but that has now been replaced by a path_kill_slashes() call,
which also makes the result prettier in case the input contains
redundant slashes that would otherwise be copied to the result.
|
|
|
|
vendor string array.
The string "Microsoft Corporation" is used in the Surface Tablet's DMI vendor ID.
https://bugs.freedesktop.org/show_bug.cgi?id=78312
|
|
|
