| Age | Commit message (Collapse) | Author |
|---|
|
Let's add a generic parser for VLAN ids, which should become handy as
preparation for PR #3428. Let's also make sure we use uint16_t for the vlan ID
type everywhere, and that validity checks are already applied at the time of
parsing, and not only whne we about to prepare a netdev.
Also, establish a common definition VLANID_INVALID we can use for
non-initialized VLAN id fields.
|
|
Now we don't support parsing double at map_basic.
when trying to use bus_message_map_all_properties with a double
this fails. Let's add it.
|
|
Assorted stuff
|
|
New exec boolean MemoryDenyWriteExecute, when set, installs
a seccomp filter to reject mmap(2) with PAGE_WRITE|PAGE_EXEC
and mprotect(2) with PAGE_EXEC.
|
|
Recently added cgroup unified hierarchy support uses "max" in configurations
for no upper limit. While consistent with what the kernel uses for no upper
limit, it is inconsistent with what systemd uses for other controllers such as
memory or pids. There's no point in introducing another term. Update cgroup
unified hierarchy support so that "infinity" is the only term that systemd
uses for no upper limit.
|
|
Implement sets of system calls to help constructing system call
filters. A set starts with '@' to distinguish from a system call.
Closes: #3053, #3157
|
|
As suggested here:
https://bugs.freedesktop.org/show_bug.cgi?id=64737#c8
This adds a new call terminal_is_dumb() and makes use of this where
appropriate.
|
|
|
|
On the unified hierarchy, memory controller implements three control knobs -
low, high and max which enables more useable and versatile control over memory
usage. This patch implements support for the three control knobs.
* MemoryLow, MemoryHigh and MemoryMax are added for memory.low, memory.high and
memory.max, respectively.
* As all absolute limits on the unified hierarchy use "max" for no limit, make
memory limit parse functions accept "max" in addition to "infinity" and
document "max" for the new knobs.
* Implement compatibility translation between MemoryMax and MemoryLimit.
v2:
- Fixed missing else's in config_parse_memory_limit().
- Fixed missing newline when writing out drop-ins.
- Coding style updates to use "val > 0" instead of "val".
- Minor updates to documentation.
|
|
We have to pass addresses of changes and n_changes to
bus_deserialize_and_dump_unit_file_changes(). Otherwise we are hit by
missing information (subsequent calls to unit_file_changes_add() to
not add anything).
Also prevent null pointer dereference in
bus_deserialize_and_dump_unit_file_changes() by asserting.
Fixes #3339
|
|
Implement compat translation between IO* and BlockIO* settings
|
|
The original conflict is fixed in the kernel in v4.6-rc7-40-g4a91cb61bb,
but now our work-around causes a compilation failure.
Keep the workaround to support 4.5 kernels for now, and layer
more ugliness on top.
Tested with:
kernel-headers-4.6.0-1.fc25.x86_64
glibc-devel-2.23.90-18.fc25.x86_64
kernel-headers-4.5.4-300.fc24.x86_64
glibc-devel-2.23.1-7.fc24.x86_64
kernel-headers-4.4.9-300.fc23.x86_64
glibc-devel-2.22-16.fc23.x86_64
kernel-headers-4.1.13-100.fc21.x86_64
glibc-devel-2.20-8.fc21.x86_64
|
|
Adds support to core for systemd D-Bus clients to send the
`SELinuxContext` property . This means `systemd-run -p
SELinuxContext=foo` should now work.
|
|
Currently, there are two cgroup IO limits, bandwidth max for read and write,
and they are hard-coded in various places. This is fine for two limits but IO
is expected to grow more limits - low, high and max limits for bandwidth and
IOPS - and hard-coding each limit won't make sense.
This patch replaces hard-coded limits with an array indexed by
CGroupIOLimitType and accompanying string and default value tables so that new
limits can be added trivially.
|
|
core: add io controller support on the unified hierarchy
|
|
Add a synchronization point so that custom initramfs units can run
after the root device becomes available, before it is fsck'd and
mounted.
This is useful for custom initramfs units that may modify the
root disk partition table, where the root device is not known in
advance (it's dynamically selected by the generators).
|
|
Fix "preset-all" with dangling symlinks and install-section hint emitted too eagerly
|
|
That function doesn't draw anything on it's own, just returns a string, which
sometimes is more than one character. Also remove "DRAW_" prefix from character
names, TREE_* and ARROW and BLACK_CIRCLE are unambigous on their own, don't
draw anything, and are always used as an argument to special_glyph().
Rename "DASH" to "MDASH", as there's more than one type of dash.
|
|
It's quite a bit shorter and just as readable.
(The full sentence with "pointing to" was added to replace a text that used
"ln -s %s %s". Using the "ln" syntax is indeed unclear, because it's not
obvious which is the source and which is the target, and because symlink(2)
uses the opposite order to ln(1). But with the unicode arrow there should
be no ambiguity.)
|
|
Executing 'systemctl enable' on the same unit twice would cause
a warning about a missing [Install] section to be printed. To avoid
this, count all symlinks that "would" be created, and return 1
no matter if we actually created a symlink or skipped creation because
it already exists.
|
|
This fixes 'preset-all' with a unit that is a dangling symlink.
$ systemctl --root=/ preset-all
Unit syslog.service is an alias to a unit that is not present, ignoring.
Unit auditd.service is masked, ignoring.
Unit NetworkManager.service is masked, ignoring.
|
|
$ systemctl --root=/ preset foobar.service
Cannot find unit foobar.service.
Failed to preset: No such file or directory.
$ systemctl --root=/ preset foobar@.service
Cannot find unit foobar@.service.
Failed to preset: No such file or directory.
$ systemctl --root=/ preset foobar@blah.service
Cannot find unit foobar@blah.service or foobar@.service.
Failed to preset: No such file or directory.
|
|
|
|
|
|
Cgroup fixes.
|
|
On the unified hierarchy, blkio controller is renamed to io and the interface
is changed significantly.
* blkio.weight and blkio.weight_device are consolidated into io.weight which
uses the standardized weight range [1, 10000] with 100 as the default value.
* blkio.throttle.{read|write}_{bps|iops}_device are consolidated into io.max.
Expansion of throttling features is being worked on to support
work-conserving absolute limits (io.low and io.high).
* All stats are consolidated into io.stats.
This patchset adds support for the new interface. As the interface has been
revamped and new features are expected to be added, it seems best to treat it
as a separate controller rather than trying to expand the blkio settings
although we might add automatic translation if only blkio settings are
specified.
* io.weight handling is mostly identical to blkio.weight[_device] handling
except that the weight range is different.
* Both read and write bandwidth settings are consolidated into
CGroupIODeviceLimit which describes all limits applicable to the device.
This makes it less painful to add new limits.
* "max" can be used to specify the maximum limit which is equivalent to no
config for max limits and treated as such. If a given CGroupIODeviceLimit
doesn't contain any non-default configs, the config struct is discarded once
the no limit config is applied to cgroup.
* lookup_blkio_device() is renamed to lookup_block_device().
Signed-off-by: Tejun Heo <htejun@fb.com>
|
|
The macro determines the right length of a AF_UNIX "struct sockaddr_un" to pass to
connect() or bind(). It automatically figures out if the socket refers to an
abstract namespace socket, or a socket in the file system, and properly handles
the full length of the path field.
This macro is not only safer, but also simpler to use, than the usual
offsetof() + strlen() logic.
|
|
bus_append_unit_property_assignment() was missing an argument for
sd_bus_message_append() when processing BlockIODeviceWeight leading to
segfault. Fix it.
Signed-off-by: Tejun Heo <htejun@fb.com>
|
|
|
|
install: cache the presets before evaluating
|
|
The previous implementation traversed the various config directories,
walking the preset files and parsing each line to determine if a service
should be enabled or disabled. It did this for every service which
resulted in many more file operations than neccessary.
This approach parses each of the preset entries into an array which is
then used to check if each service should be enabled or disabled.
|
|
Refuse Alias, DefaultInstance, templated units in install (as appropriate)
|
|
Fall back to a normal copy operation when the backing file system isn't btrfs,
and hence doesn't support cheap snapshotting. Of course, this will be slow, but
given that the execution is asynchronous now, this should be OK.
Fixes: #1308
|
|
chattr_path() takes two bitmasks, and no booleans. Fix the various invocations
to do this properly.
|
|
|
|
$ systemctl --root=/ enable templated@bar.mount
Unit type mount cannot be templated.
Failed to enable: Invalid argument.
|
|
[/etc/systemd/system/mnt-test.mount:6] DefaultInstance only makes sense for template units, ignoring.
|
|
This way it can be used in install.c in subsequent commit.
|
|
A downside is that a warning about missing [Install] is printed:
$ systemctl --root=/ enable mnt-test.mount
[/etc/systemd/system/mnt-test.mount:5] Aliases are not allowed for mount units, ignoring.
The unit files have no installation config (WantedBy, RequiredBy, Also, Alias
settings in the [Install] section, and DefaultInstance for template units).
This means they are not meant to be enabled using systemctl.
Possible reasons for having this kind of units are:
1) A unit may be statically enabled by being symlinked from another unit's
.wants/ or .requires/ directory.
2) A unit's purpose may be to act as a helper for some other unit which has
a requirement dependency on it.
3) A unit may be started when needed via activation (socket, path, timer,
D-Bus, udev, scripted systemctl call, ...).
4) In case of template units, the unit is meant to be enabled with some
instance name specified.
That's a bit misleading, but I don't see an easy way to fix this. But
the situation is similar for many other parsing errors, so maybe that's
OK.
|
|
This way it can be used in install.c in subsequent commit.
|
|
It was incorrectly using cg_cpu_weight_parse() to parse BlockIOWeight. Update
it to use cg_blkio_weight_parse() instead.
Signed-off-by: Tejun Heo <htejun@fb.com>
|
|
This commit improves systemd performance on the systems which have
thousands of units.
|
|
|
|
In standard linux parlance, "hidden" usually means that the file name starts
with ".", and nothing else. Rename the function to convey what the function does
better to casual readers.
Stop exposing hidden_file_allow_backup which is rather ugly and rewrite
hidden_file to extract the suffix first. Note that hidden_file_allow_backup
excluded files with "~" at the end, which is quite confusing. Let's get
rid of it before it gets used in the wrong place.
|
|
If journal files are not cleanly closed it might happen that intermediaery
journal entries cannot be read. Handle this nicely, skip over the unreadable
entries, and log a debug message about it; after all we generally follow the
logic that we try to make the best of corrupted files.
|
|
The "resources" error is really just the generic error we return when
we hit some kind of error and we have no more appropriate error for the case to
return, for example because of some OS error.
Hence, reword the explanation and don't claim any relation to resource limits.
Admittedly, the "resources" service error is a bit of a misnomer, but I figure
it's kind of API now.
Fixes: #2716
|
|
This suppresses output of the hostname for messages from the local system.
Fixes: #2342
|
|
1970 UTC
aka "UNIX time".
Fixes: #2120
|
|
After all, the enum definition is in output-mode.h
|
|
Follow-up for:
https://github.com/systemd/systemd/pull/3033#discussion_r59689398
|
