summaryrefslogtreecommitdiff
path: root/src/shared
AgeCommit message (Collapse)Author
2013-02-13log_error() if inotify_add_watch() failsHarald Hoyer
[zj: Reworded message s/to watch/to add watch on/ to make it clear that it was the watch init action that failed, and not the "process of watching". I think this way it'll be clearer to people who don't know what inotify does.]
2013-02-13man: rename systemd.conf to systemd-system.confZbigniew Jędrzejewski-Szmek
Alias as systemd-user.conf is also provided. This should help users running systemd in session mode. https://bugzilla.redhat.com/show_bug.cgi?id=690868
2013-02-13ratelimit: fix off-by-oneMichael Olbrich
The current code might make sense during startup for service restart limiting: With burst=1 after starting num is 1, so the next ('first') restart is still accepted ( 1 <= 1). However, once interval has expired, num is 1 after the first restart, so the second restart is also accepted. This change is also useful in combination with watchdogs: With burst=1 and a very large interval the system can be restarted on the first failure.
2013-02-13util: *DO NOT* loop for EINTR handling with close_nointr()Colin Walters
See the linked references for why we should not do this.
2013-02-13util: introduce strcaseeq/strncaseeqThomas Hindoe Paaboel Andersen
2013-02-13use strneq instead of strncmpThomas Hindoe Paaboel Andersen
2013-02-13efi: add missing #includeLennart Poettering
2013-02-13efi: various cleanupsLennart Poettering
2013-02-13missing: define MS_REC and MS_SHARED if not defined alreadyAleksander Morgado
2013-02-11binfmt,tmpfiles,modules-load,sysctl: rework the various early-boot services ↵Lennart Poettering
that work on .d/ directories This unifies much of the logic behind them: - All four will now ofllow the rule that the earlier file and earlier assignment in the .d/ directories wins. Before, sysctl was the only outlier, where the later setting always won. - All four now support getopt() and --help on the command line. - All four can now handle specification of configuration file names on the command line to apply. The tools will automatically find them, and apply them. Previously only tmpfiles could do that. This is useful for %post scripts in RPMs and suchlike. - This fixes various error path issues in conf_files_list()
2013-02-11core: properly validate environment data from Environment= lines in unit filesLennart Poettering
2013-02-11manager: validate environment parameters for SetEnvironment(), ↵Lennart Poettering
UnsetEnvironment() bus calls
2013-02-11bootctl: add boot loader and firmware interface toolKay Sievers
2013-02-11efi: fix returned length of efi_get_variable()Lennart Poettering
2013-02-11util: rework load_env_file()Lennart Poettering
Inner library calls should not invoke log_oom(), that's something for main programs, not library calls. Don't read through uninitialized memory if a file ends in a continuation line. Add comments for the non-obvious bits. Don't choke on comment lines that are continuation lines. Simplify some things.
2013-02-11path-util: fix memory leakLennart Poettering
2013-02-11util: introduce FOREACH_LINE for iterating through filesLennart Poettering
2013-02-11env: considerably beef up environment cleaning logicLennart Poettering
Now, actually check if the environment variable names and values used are valid, before accepting them. With this in place are at some places more rigid than POSIX, and less rigid at others. For example, this code allows lower-case environment variables (which POSIX suggests not to use), but it will not allow non-UTF8 variable values. All in all this should be a good middle ground of what to allow and what not to allow as environment variables. (This also splits out all environment related calls into env-util.[ch])
2013-02-08shared: conf-files - use root parameter and convert to auto-cleanupKay Sievers
2013-02-08shared: conf-files - add root parameterKay Sievers
2013-02-07logs-show: show messages for all unit types in systemctl statusMirco Tischler
I can't find a reason why we shouldn't try to output messages for other unit types than .service, .socket, .mount and .swap as well. It's probably a leftover from before we started logging UNIT= from inside PID 1.
2013-02-07journal: log user units for coredumps and show them in systemctl statusMirco Tischler
2013-02-06systemd: raise level of message about lookup pathsZbigniew Jędrzejewski-Szmek
This can be pretty important for the user, and is not trivial to figure out in all cases. Also show failing path in error messages.
2013-02-06shared: remove now unused functionZbigniew Jędrzejewski-Szmek
2013-02-06systemd: do not remove empty paths from unit lookup pathZbigniew Jędrzejewski-Szmek
The ability to start a new unit with 'systemctl start ...' should not depend on whether there are other units in the directory. Previously, an additional 'systemctl daemon-reload' would be necessary to tell systemd to update the list of unit lookup paths.
2013-02-07strv: add strv_printThomas Hindoe Paaboel Andersen
Clearer, and spares the temp variable.
2013-01-29install: allow %u an and %U specifiers in WantedBy/RequiredBy/AliasZbigniew Jędrzejewski-Szmek
2013-01-29install: allow specifiers in WantedBy/RequiredBy/AliasZbigniew Jędrzejewski-Szmek
This allows one templated unit to refer to another templated unit at installation time. Examples: > grep WantedBy ~/.config/systemd/user/mpop@.timer WantedBy=services@%i.target > srv disable mpop@iit.timer rm '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer' > srv enable mpop@iit.timer ln -s '/home/alxchk/.config/systemd/user/mpop@.timer' '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer' Based-on-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
2013-01-29Move generic specifier functions to sharedZbigniew Jędrzejewski-Szmek
No functional change. This makes it possible to use them in install.c.
2013-01-29install: automatic cleanup using local cleanup functionsZbigniew Jędrzejewski-Szmek
2013-01-29install: use automatic cleanup in find_symlinks_fd()Zbigniew Jędrzejewski-Szmek
2013-01-29shared: introduce _cleanup_set_free_free_Zbigniew Jędrzejewski-Szmek
2013-01-25Add _cleanup_pclose_ and fix mismatching pipe close opened by popen()Zbigniew Jędrzejewski-Szmek
Based-on-patch-by: Thomas Jarosch <thomas.jarosch@intra2net.com> cppcheck reported: [src/bootchart/svg.c:791]: (error) Mismatching allocation and deallocation: f
2013-01-24efi: fix Usec vs. USecKay Sievers
2013-01-23efi: read microseconds from boot loader info instead of "ticks" magicKay Sievers
2013-01-21efi: add efi boot generator that automatically mounts the ESP to /bootLennart Poettering
2013-01-21util: move is_efiboot() to efivars.cLennart Poettering
2013-01-19core: if the bootloader supports it, determine firmware and boot loader delayLennart Poettering
This allows us to print simple performance data of all parts of the boot now: - firmware - boot loader - kernel - initrd - userspace This only works for bootloaders which support passing TSC data via EFI variables. As of now that's only gummiboot.
2013-01-19unit: optionally allow making cgroup attribute changes persistentLennart Poettering
2013-01-19cgroup: additional validity checks for cgroup attribute namesLennart Poettering
2013-01-18core/cgroup-util: simplify functions and add testsZbigniew Jędrzejewski-Szmek
2013-01-18core/group-util: merge two functionsZbigniew Jędrzejewski-Szmek
2013-01-18logs-show: add show_journal_by_user_unitMirco Tischler
Print the journal for a user session unit. For now this filters by _SYSTEMD_USER_UNIT and USER_UNIT and additionally _UID.
2013-01-18journal: log _SYSTEMD_USER_UNIT for user session unitsMirco Tischler
2013-01-18util: modernization and test for load_env_fileZbigniew Jędrzejewski-Szmek
2013-01-18util: continuation support for load_env_fileMichal Vyskocil
Variable definitions can be written on more than one line - if each ends with a backslash, then is concatenated with a previous one. Only backslash and unix end of line (\n) are treated as a continuation. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58083 [zj: squashed two patches together; cleaned up grammar; removed comment about ignoring trailing backslash -- it is not ignored.] Document continuation support in systemd.exec
2013-01-18share/log: skip file/line/func info if emptyZbigniew Jędrzejewski-Szmek
The new microhttpd logger doesn't know this information. It is better to log nothing than fake values.
2013-01-18share/log: unify two code pathsZbigniew Jędrzejewski-Szmek
Explicit zeroing is replaced with initialization to {0}. No functional change.
2013-01-18systemctl: add new "get-cgroup-attr" to query current cgroup attribute valueLennart Poettering
Also adds a pair of bus calls for this to the daemon.
2013-01-18strv: make strv_extend() smarterLennart Poettering
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-17 06:36:55 +0000